कोर्स के अध्याय
प्रशिक्षण · ट्रैक 14. स्प्रेडशीट · 5 में से अध्याय 14.3
14.3 तालिकाएं, खोज और व्यू 2:17
किसी रेंज को तालिका के रूप में फ़ॉर्मेट करें, टेक्स्ट खोजें और बदलें, और सेल बदले बिना नामित व्यू सहेजें।
Holarch 2.35 दिखाता है।
आप क्या सीखेंगे
- किसी रेंज को नामित तालिका के रूप में फ़ॉर्मेट करें और उसे फ़ॉर्मूलों में उपयोग करें
- पूरी वर्कबुक में एक ही चरण में टेक्स्ट खोजें और बदलें
- फ़िल्टर बटन चालू करें और एक कॉलम क्रमबद्ध करें
- एक नामित व्यू सहेजें और व्यू के बीच स्विच करें
EO-1 द्रव्यमान बजट व्यवस्थित करें: सबसिस्टम पंक्तियों को नाम, बैंडेड पंक्तियों और फ़िल्टर बटन वाली तालिका के रूप में फ़ॉर्मेट करें, खोजें और बदलें से किसी सबसिस्टम का नाम हर जगह बदलें, फिर प्रोजेक्ट के साथ साझा एक नामित व्यू में तालिका को द्रव्यमान के अनुसार क्रमबद्ध करें, और डिफ़ॉल्ट व्यू पर वापस जाएं, जो सेल को अब भी वैसे ही दिखाता है जैसे वे संग्रहीत हैं।
प्रोजेक्ट फ़ाइलें
- शुरुआती प्रोजेक्ट (.holarch.json; प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → प्रोजेक्ट आयात करें (.json)…)
- पूरा किया गया प्रोजेक्ट (.holarch.json; प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → प्रोजेक्ट आयात करें (.json)…)
वीडियो holarch.app से चलता है; गोपनीयता नीति देखें।
अभ्यास
यह स्वयं Holarch में, CubeSat EO-1 पर करें।
- अध्याय की शुरुआती फ़ाइल खोलें, या अध्याय 14.2 की अपनी वर्कबुक।
- A2:E8 चुनें, तालिका पर क्लिक करें, उसका नाम
Subsystemsरखें और ठीक है पर क्लिक करें। - खोजें और बदलें खोलें,
Commsखोजें, बदलने का फ़ील्ड खोलें,Communicationsटाइप करें, सभी ढूंढें और फिर सभी बदलें पर क्लिक करें। - तालिका में क्लिक करें, क्रमबद्ध और फ़िल्टर करें खोलें और फ़िल्टर बटन चालू करें। With contingency पर Z से A क्रम में लगाएं चुनें।
- व्यू सहेजें पर क्लिक करें, उसका नाम
Heaviest firstरखें, पहुंच वाले सभी लोग चुनें और सहेजें। डिफ़ॉल्ट और Heaviest first के बीच स्विच करें।
आपका काम तब पूरा है जब तालिका का नाम Subsystems है, Comms की जगह Communications है, और Heaviest first व्यू पंक्तियों को क्रमबद्ध करता है जबकि डिफ़ॉल्ट उन्हें उनके क्रम में दिखाता है।
स्वयं जांचें
- कोई फ़ॉर्मूला तालिका Subsystems के Mass कॉलम का संदर्भ कैसे देता है?
- क्या किसी व्यू में क्रमबद्ध करने से सेल बदलते हैं?
- क्रम और फ़िल्टर के अलावा व्यू और क्या रखता है?
उत्तर दिखाएं
कोई फ़ॉर्मूला तालिका Subsystems के Mass कॉलम का संदर्भ कैसे देता है?
Subsystems[Mass] के रूप में: तालिका का नाम और वर्गाकार कोष्ठक में कॉलम का नाम।
क्या किसी व्यू में क्रमबद्ध करने से सेल बदलते हैं?
नहीं। व्यू केवल यह बदलता है कि आप शीट कैसे देखते हैं; डिफ़ॉल्ट पर वापस जाने से पंक्तियां अपने क्रम में दिखती हैं।
क्रम और फ़िल्टर के अलावा व्यू और क्या रखता है?
छिपे हुए कॉलम, कॉलम की चौड़ाई और फ़्रीज़ किए गए पैन।
और पढ़ें
ट्रांसक्रिप्ट
ट्रांसक्रिप्ट दिखाएं (नरेशन और स्क्रीन पर क्या है)
Introduction
Chapter three: tables, find and views. A table gives a block of rows a name and a style. Find and Replace changes text in one step. And views show the same cells in different ways.
In this chapter you organize the budget.
Tables
Select the headings and the six subsystems, A2 to E8, and click Table.
On screen: Name Box A2:E8 → Table.
The dialog shows the range, and that the first row holds the headers. Name the table Subsystems, and click OK.
On screen: Range A2:E8, headers; name Subsystems → OK.
The table has a styled header row and banded rows, and grows when you add a row below it. Its name works in formulas: Subsystems, with a column name in square brackets.
On screen: The table: header style, banded rows.
Find and Replace
One subsystem is abbreviated. Open Find and Replace. Find Comms, open the replace field, and type Communications.
On screen: Find ▾ → Comms; ⇄ → Communications.
Find All lists each match with its sheet and cell. Click Replace All: the name is changed everywhere it appears, in one undo step. Close the bar.
On screen: Find All → the results; Replace All → close.
Named views
Now a view. Views change how you see the sheet, never the cells. Click in the table, open Sort and Filter, and turn on Filter Buttons.
On screen: B3 → Sort & Filter ▾ → Filter Buttons.
Click the filter button on With contingency, and choose Sort Z to A: the heaviest subsystem comes first.
On screen: With contingency ▾ → Sort Z to A.
The views bar shows the unsaved change. Click Save View, name it Heaviest first, choose Everyone with access, and save it.
On screen: Save View → Heaviest first, Everyone with access → Save View.
A view keeps sort, filters, hidden columns, widths and frozen panes. Click Default: the rows are back in their order, because the cells never changed. Everyone with access can switch views without affecting anyone else.
On screen: Default → rows in order; Heaviest first.
Recap
To recap: format rows as a named table, use Find and Replace for changes in many cells, and save sorts and filters as views.
In the next chapter, you chart the budget and feed it from the model.