कोर्स के अध्याय
प्रशिक्षण · ट्रैक 1. शुरुआत · 8 में से अध्याय 1.3
1.3 एट्रिब्यूट और संबंध 3:29
आइटम का वर्णन करें और उन्हें जोड़कर मॉडल बनाएं।
Holarch 2.41 दिखाता है।
आप क्या सीखेंगे
- इंस्पेक्टर में किसी आइटम के एट्रिब्यूट संपादित करें, जैसे किसी आवश्यकता का औचित्य
- मौजूदा लिंक करें… से आइटम को संबंधित करें और हर लिंक को दोनों छोरों से पढ़ें
- किसी एसेट को भागों में डीकंपोज़ करें और किसी फ़ंक्शन को उसे करने वाले भाग को आवंटित करें
- किसी फ़ंक्शन को उस आवश्यकता तक ट्रेस करें जिसे वह संतुष्ट करता है
- आइटम व्यू में संबंधित आइटम के माध्यम से मॉडल में घूमें
Bike-Share Dock के आइटम का एट्रिब्यूट (विवरण, औचित्य, स्थिति) से वर्णन करें और उन्हें संबंधों से जोड़ें: किसी आवश्यकता को उस ज़रूरत तक ट्रेस करें जिससे वह आती है, सिस्टम को उसके भागों में डीकंपोज़ करें, बताएं कि कौन-सा भाग कौन-सा फ़ंक्शन करता है और कौन-सा फ़ंक्शन कौन-सी आवश्यकता संतुष्ट करता है, और इंस्पेक्टर और आइटम व्यू में हर लिंक को दोनों छोरों से पढ़ें।
प्रोजेक्ट फ़ाइलें
- शुरुआती प्रोजेक्ट (.holarch.json; प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → प्रोजेक्ट आयात करें (.json)…)
- पूरा किया गया प्रोजेक्ट (.holarch.json; प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → प्रोजेक्ट आयात करें (.json)…)
वीडियो holarch.app से चलता है; गोपनीयता नीति देखें।
अभ्यास
इसे Holarch में CubeSat EO-1 डेमो प्रोजेक्ट पर स्वयं करें।
- अपना EO-1 डेमो प्रोजेक्ट खोलें (या उसे बनाएं: प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → नया डेमो प्रोजेक्ट → CubeSat (गाइडेड सिस्टम्स इंजीनियरिंग))।
- डेटाबेस में 2.5 Safe Mode Recovery चुनें और इंस्पेक्टर में एक औचित्य टाइप करें (स्पेसक्राफ़्ट को सेफ़ मोड से अपने आप क्यों निकलना चाहिए)।
- F10 Enter Safe Mode चुनें। ट्रेस में satisfies खोजें (यदि वह सूचीबद्ध नहीं है तो सभी संबंध दिखाएं पर टिक करें), + → मौजूदा लिंक करें… पर क्लिक करें, 2.5 Safe Mode Recovery पर टिक करें और चयनित लिंक करें पर क्लिक करें। 2.5 चुनें और वही लिंक satisfied by के अंतर्गत खोजें।
- 1.4 C&DH चुनें, सभी संबंध दिखाएं पर टिक करें, और उसे performs से OPS.9 Hold Data Onboard से संबंधित करें, संचालन का वह एकमात्र चरण जिसे अभी कोई भाग नहीं करता।
- 2.2 Mission Operations Center चुनें। decomposed by पर + → नया Asset… पर क्लिक करें और
Image Processing Serverबनाएं। - आइटम व्यू खोलने के लिए F10 Enter Safe Mode पर डबल-क्लिक करें, फिर संबंधित नामों पर क्लिक करते हुए आगे बढ़ें: F10 से 1.4 C&DH तक, और वहाँ से 1 EO-1 Spacecraft तक।
आपका काम तब पूरा है जब 2.5 Safe Mode Recovery का आइटम व्यू satisfied by के अंतर्गत F10 सूचीबद्ध करता है, और OPS.9, performed by के अंतर्गत 1.4 C&DH सूचीबद्ध करता है।
स्वयं जांचें
- आप F10 से satisfies के साथ एक लिंक जोड़ते हैं। 2.5 अब बिना किसी अतिरिक्त चरण के satisfied by क्यों दिखाता है?
- मौजूदा लिंक करें… का पिकर प्रोजेक्ट का हर आइटम क्यों नहीं दिखाता?
- किसी एसेट को performs से किसी एक्शन से संबंधित करना सिस्टम्स इंजीनियरिंग के शब्दों में क्या दर्ज करता है?
उत्तर दिखाएं
आप F10 से satisfies के साथ एक लिंक जोड़ते हैं। 2.5 अब बिना किसी अतिरिक्त चरण के satisfied by क्यों दिखाता है?
हर संबंध का हर दिशा में एक नाम होता है। यह एक ही लिंक है, जिसे फ़ंक्शन से satisfies और आवश्यकता से satisfied by के रूप में पढ़ा जाता है।
मौजूदा लिंक करें… का पिकर प्रोजेक्ट का हर आइटम क्यों नहीं दिखाता?
यह केवल उन क्लासों के आइटम सूचीबद्ध करता है जिनकी संबंध इस आइटम के लिए अनुमति देता है, इसलिए आप ऐसा लिंक नहीं बना सकते जिसे स्कीमा परिभाषित नहीं करता।
किसी एसेट को performs से किसी एक्शन से संबंधित करना सिस्टम्स इंजीनियरिंग के शब्दों में क्या दर्ज करता है?
किसी फ़ंक्शन का उस भौतिक भाग को आवंटन जो उसे पूरा करता है।
और पढ़ें
ट्रांसक्रिप्ट
ट्रांसक्रिप्ट दिखाएं (नरेशन और स्क्रीन पर क्या है)
Introduction
Chapter three: attributes and relationships. Attributes describe an item. Relationships connect items, and they are what turn a list of items into a model.
We continue with the Bike-Share Dock project from the last chapter.
Attributes
Open the Database, and select the requirement Unlock a Bike. The inspector's Item section holds its number, name and description. Below it, Attributes holds the attributes of its class, such as a rationale and a status.
On screen: Database → 1.1 Unlock a Bike → Attributes.
A rationale says why the requirement exists, which helps when someone later wants to change it. Type it in, and click elsewhere to save.
On screen: Rationale.
Asset and Action have their own attributes, such as a function's duration, which simulation uses later. A project owner can add attributes to any class in the Schema.
On screen: Attributes of an Action.
Relate items
Now the relationships. Select Unlock a Bike again, and click Trace in the inspector. It groups the relations of this class by purpose. Find traced from, click its plus button, and choose Link existing.
On screen: Trace → traced from → + → Link existing…
The picker lists only items that this relation allows. Check Find a Bike Nearby, the need this requirement answers, and click Link Selected.
On screen: Pick N.1 → Link Selected.
Every relationship has a name in each direction. Select the need, and its Trace shows the same link the other way round: Find a Bike Nearby is traced to Unlock a Bike.
On screen: N.1 → traced to 1.1.
Structure and allocation
Next, the system's structure. Select Bike-Share Dock, find decomposed by, and relate its three parts at once: the docking bay, the kiosk and the charging unit. The back office service is an external system, outside the dock, so it is not one of its parts.
On screen: S.0 → decomposed by → S.1–S.3.
Then say which part does what. Select the kiosk. Performs has no links yet, so tick Show all relations, and relate the kiosk with performs to Rent a Bike and Take Payment. In systems engineering terms, you are allocating functions to the physical parts.
On screen: S.2 Kiosk → Show all relations → performs → F.1, F.4.
The docking bay performs Return a Bike, and the charging unit performs Charge Bikes. They are related the same way.
On screen: S.1, S.3 performs (entered off camera).
Finally, link the function to the requirement it meets. Select Rent a Bike, and relate it with satisfies to Unlock a Bike.
On screen: F.1 → satisfies → 1.1.
Reading the links
Trace shows the relations that have links, plus a few kept visible even when empty. Untick Show all relations, and you see just what this function is connected to.
On screen: Trace → Show all relations off.
Double-click the row to open the Entity View. It shows the same sections on a full page, and linking works here too.
On screen: Entity View of Rent a Bike.
Click a related item's name to move to it. From the function, go to the kiosk that performs it, and from there to the dock it belongs to. This is how you walk the model.
On screen: Entity View: → Kiosk → Bike-Share Dock.
Recap
Let's recap. You edited attributes, related items with Link existing, read each link from both ends, decomposed the system, allocated functions to parts, and walked the links in the Entity View.
Next, you draw part of this model as a diagram.