Holarch
कोर्स के अध्याय

प्रशिक्षण · ट्रैक 1. शुरुआत · 8 में से अध्याय 1.5

1.5 दस्तावेज़ 2:46

ऐसा विनिर्देश लिखें जिसकी आवश्यकताएं मॉडल आइटम हैं।

Holarch 1.27 दिखाता है।

आप क्या सीखेंगे

  • किसी अंतर्निहित टेम्पलेट से आवश्यकता विनिर्देश बनाएं
  • किसी अनुभाग के अंतर्गत एक आवश्यकता जोड़ें और उसका shall कथन लिखें
  • त्वरित जोड़ें से कई आवश्यकताएं जल्दी जोड़ें
  • किसी दस्तावेज़ की आवश्यकताओं को डेटाबेस में मॉडल आइटम के रूप में खोजें
  • डिलीवर करें मेनू से विनिर्देश को Word में निर्यात करें

किसी अंतर्निहित टेम्पलेट से Bike-Share Dock का सिस्टम आवश्यकता विनिर्देश बनाएं, + चाइल्ड और इंस्पेक्टर से किसी अनुभाग के अंतर्गत एक आवश्यकता लिखें, त्वरित जोड़ें से और जोड़ें, देखें कि दस्तावेज़ की हर आवश्यकता डेटाबेस में एक मॉडल आइटम है, और दस्तावेज़ को Word में निर्यात करें।

प्रोजेक्ट फ़ाइलें

वीडियो holarch.app से चलता है; गोपनीयता नीति देखें।

अभ्यास

इसे Holarch में CubeSat EO-1 डेमो प्रोजेक्ट पर स्वयं करें।

  1. अपना EO-1 डेमो प्रोजेक्ट खोलें (या उसे बनाएं: प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → नया डेमो प्रोजेक्ट → CubeSat (गाइडेड सिस्टम्स इंजीनियरिंग))।
  2. ज़रूरतें और आवश्यकताएं → दस्तावेज़ खोलें और + नया दस्तावेज़ पर क्लिक करें। उसका नाम EO-1 Ground Station Specification रखें, टेम्पलेट आवश्यकता विनिर्देश चुनें और बनाएं पर क्लिक करें।
  3. अनुभाग 4.1 Primary Functions चुनें, + चाइल्ड पर क्लिक करें, आवश्यकता का नाम Track the Spacecraft रखें और इंस्पेक्टर के विवरण में उसका shall कथन लिखें।
  4. नीचे त्वरित जोड़ें में 10 Design Constraints के अंतर्गत चुनें, The ground station antenna shall have a diameter of no more than 3.7 m. टाइप करें और Enter दबाएं। उसी तरह एक दूसरी बाधा जोड़ें।
  5. डेटाबेस खोलें और नई आवश्यकताओं की सूची के लिए खोज बॉक्स में in:"EO-1 Ground Station Specification" class:Requirement टाइप करें।
  6. दस्तावेज़ में वापस, डिलीवर करें ▾ → विनिर्देश (Word) चुनें और फ़ाइल खोलें।

आपका काम तब पूरा है जब Word फ़ाइल आपकी तीनों आवश्यकताएं उनके क्रमांकित अनुभागों के अंतर्गत दिखाती है।

स्वयं जांचें

  1. Holarch दस्तावेज़ में टाइप की गई आवश्यकता और वर्ड प्रोसेसर में टाइप की गई आवश्यकता में क्या अंतर है?
  2. त्वरित जोड़ें नई आवश्यकता का नाम कैसे चुनता है?
  3. आप लेखन मार्गदर्शन शामिल करें पर कब टिक करेंगे?
उत्तर दिखाएं
  1. Holarch दस्तावेज़ में टाइप की गई आवश्यकता और वर्ड प्रोसेसर में टाइप की गई आवश्यकता में क्या अंतर है?

    Holarch में दस्तावेज़ की हर आवश्यकता एक मॉडल आइटम है: आप उसे ट्रेस कर सकते हैं, उसकी गुणवत्ता जांच सकते हैं, उसे आरेखों पर बना सकते हैं और डेटाबेस में खोज सकते हैं।

  2. त्वरित जोड़ें नई आवश्यकता का नाम कैसे चुनता है?

    यह shall के बाद के शब्दों से आवश्यकता का नाम रखता है और चुने गए अनुभाग में उसके सहोदरों के बाद उसे क्रमांक देता है।

  3. आप लेखन मार्गदर्शन शामिल करें पर कब टिक करेंगे?

    जब लेखक उस दस्तावेज़ प्रकार से नए हों: तब हर अनुभाग को एक छोटा नोट मिलता है कि उसमें क्या होना चाहिए, जिसे आप लिखते समय हटा देते हैं।

और पढ़ें

ट्रांसक्रिप्ट

ट्रांसक्रिप्ट दिखाएं (नरेशन और स्क्रीन पर क्या है)

Introduction

Chapter five: documents. Requirements usually live in a specification. In Holarch a document is an outline of model items, so every requirement in it is an item you can trace, check and draw.

We continue with the Bike-Share Dock project, and write its system requirements specification.

Create from a template

Open Needs and Requirements, then Documents, and click New Document.

On screen: Needs & Requirements → Documents → + New Document.

Name it Bike-Share Dock System Requirements. The templates below are for requirements documents; the menu next to them shows the templates for other kinds of document.

On screen: New Document: name; templates for Requirements Document.

A template gives the document its sections. Include writing guidance adds notes that explain what each section should hold. Choose Requirements Specification, with the sections only, and click Create.

On screen: Template: Requirements Specification → Create.

The document opens with the template's numbered sections, from document control to the appendices. The outline on the left lists them, and clicking an entry jumps to it.

On screen: The new document and its outline.

Write requirements

Select section 4.1, Primary Functions. Open the menu next to After, and choose Add Child. A new requirement appears under the section, numbered 4.1.1, with its name ready to type. Type Show Available Bikes, and press Enter.

On screen: 4.1 → + After ▾ → Add Child → Show Available Bikes.

Then write the shall statement. Click the description in the inspector, type it, and click elsewhere to save.

On screen: Inspector → Description.

To add many requirements quickly, use Quick add at the bottom of the document. Choose the section Design Constraints, type the requirement, and click Add, or press Enter.

On screen: Quick add → Under 10. Design Constraints → Add.

Holarch adds it under the section, and names it from the words after shall. The cursor stays in the field, so the next requirement is one more line.

On screen: Second Quick add.

One model

Each requirement in the document is a model item. Open the Database and filter to requirements: the new ones are listed with the requirements from chapter two.

On screen: Database → + Filter → Requirement.

Export

Back in the document, the Deliver menu makes the Word file: the specification with a table of contents and the numbered requirements, ready to send for review. Choose Specification (Word).

On screen: Back to the document → Deliver ▾ → Specification (Word).

Recap

Let's recap. You created a specification from a template, wrote a requirement under a section, added more with Quick add, saw that they are model items, and exported the document to Word.

Next, you learn the quickest ways to find anything in a growing model.