कोर्स के अध्याय
प्रशिक्षण · ट्रैक 2. आवश्यकताएं और सत्यापन · 6 में से अध्याय 2.5
2.5 सत्यापन और टेस्ट सेंटर 2:55
योजना बनाएं कि हर आवश्यकता कैसे सत्यापित होगी, चरणों के साथ एक टेस्ट केस लिखें, और उसे चलाएं।
Holarch 2.13 दिखाता है।
आप क्या सीखेंगे
- किसी आवश्यकता के लिए सत्यापन विधि चुनें: निरीक्षण, विश्लेषण, प्रदर्शन या टेस्ट
- टेस्ट सेंटर में किसी आवश्यकता की सत्यापन विधि, स्तर और सफलता मानदंड की योजना बनाएं
- एक टेस्ट सुइट और चरणों वाला एक टेस्ट केस बनाएं जो किसी आवश्यकता को सत्यापित करे
- एक टेस्ट चलाएं और उसका परिणाम दर्ज करें
Bike-Share Dock के लिए सत्यापन की योजना बनाएं: हर आवश्यकता के लिए एक विधि, एक स्तर और सफलता मानदंड, किसी आवश्यकता को सत्यापित करने वाले टेस्ट केस के साथ एक टेस्ट सुइट, चरण-दर-चरण प्रक्रिया, और टेस्ट सेंटर में एक रन जो परिणाम दर्ज करता है।
प्रोजेक्ट फ़ाइलें
- शुरुआती प्रोजेक्ट (.holarch.json; प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → प्रोजेक्ट आयात करें (.json)…)
- पूरा किया गया प्रोजेक्ट (.holarch.json; प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → प्रोजेक्ट आयात करें (.json)…)
वीडियो holarch.app से चलता है; गोपनीयता नीति देखें।
अभ्यास
इसे Holarch में CubeSat EO-1 डेमो प्रोजेक्ट पर स्वयं करें।
- अपना EO-1 डेमो प्रोजेक्ट खोलें (या उसे बनाएं: प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → नया डेमो प्रोजेक्ट → CubeSat (गाइडेड सिस्टम्स इंजीनियरिंग))।
- सत्यापन → टेस्ट सेंटर खोलें और सत्यापन कवरेज तक स्क्रॉल करें। 4.4 Downlink Encryption पर सुनिश्चित करें कि I चालू है, स्तर… के अंतर्गत सबसिस्टम चुनें, और + मानदंड से सफलता मानदंड जोड़ें।
- पेज हेडर में + नया ▾ → टेस्ट सुइट… पर क्लिक करें, उसे नंबर
TS-4और नामMission Analysesदें और बनाएं पर क्लिक करें। उसके कार्ड पर + Test Case पर क्लिक करें, उसका नामDaily Collection Volume Analysisरखें, और 1.5 Daily Collection Volume चुनने के लिए Verifies में + पर क्लिक करें (इसकी विधि विश्लेषण है और अभी इसका कोई टेस्ट नहीं है)। - अपेक्षित परिणाम टाइप करें, फिर + चरण पर क्लिक करें, दो चरण जोड़ें जिनमें हर एक में एक कार्रवाई और एक अपेक्षित परिणाम हो, और लागू करें पर क्लिक करें।
- TS-4 कार्ड पर ⋯ → चक्र चलाएं… चुनें, हर चरण दर्ज करें, वास्तविक परिणाम का वर्णन करें और ✔ पास पर क्लिक करें।
- जांचे गए चरण-दर-चरण अभ्यास के लिए ट्यूटोरियल 9 Verify the Requirements चलाएं (सहायता → ट्यूटोरियल)।
आपका काम तब पूरा है जब Daily Collection Volume Analysis आपके नाम और तारीख के साथ पास हुआ दिखाता है, और 1.5 सत्यापित नहीं सूची से हट जाता है।
स्वयं जांचें
- 730-दिन के मिशन जीवनकाल की आवश्यकता के लिए कौन-सी विधि उपयुक्त है, और क्यों?
- टेस्ट केस लिखने से पहले सफलता मानदंड क्यों सेट करें?
- पास हुआ टेस्ट केस उस आवश्यकता पर क्या बदलता है जिसे वह सत्यापित करता है?
उत्तर दिखाएं
730-दिन के मिशन जीवनकाल की आवश्यकता के लिए कौन-सी विधि उपयुक्त है, और क्यों?
विश्लेषण: जीवनकाल को लॉन्च से पहले मापा नहीं जा सकता, इसलिए उसे गणना से दिखाया जाता है, जैसे विश्वसनीयता अनुमान।
टेस्ट केस लिखने से पहले सफलता मानदंड क्यों सेट करें?
वे वह मापने योग्य परिणाम बताते हैं जो दिखाता है कि आवश्यकता पूरी हुई है, ताकि टेस्ट उसी परिणाम के लिए डिज़ाइन हो, न कि उसके लिए जो टेस्ट संयोग से मापता है।
पास हुआ टेस्ट केस उस आवश्यकता पर क्या बदलता है जिसे वह सत्यापित करता है?
आवश्यकता की सत्यापन स्थिति सत्यापित हो जाती है, और वह कवरेज कार्ड और RVTM में सत्यापित नहीं सूची से हट जाती है।
और पढ़ें
ट्रांसक्रिप्ट
ट्रांसक्रिप्ट दिखाएं (नरेशन और स्क्रीन पर क्या है)
Introduction
Chapter five: verification and the Test Center. A requirement is only met when someone shows it is met. Verification plans how, and the Test Center records what happened.
We plan and run the first test for the Bike-Share Dock.
Plan verification
There are four ways to verify a requirement. Inspection looks at the product. Analysis shows it by calculation or simulation. Demonstration shows it working, without measuring. And test measures it under controlled conditions.
On screen: Card: verification methods.
Open Verification, then Test Center. Requirement Verification Coverage lists every requirement that is not verified yet. For Pay at the Kiosk, the method is already Test. Set the level to System, and add success criteria: the measurable outcome that shows the requirement is met.
On screen: Test Center → coverage → Pay at the Kiosk → Level → + Criteria.
Show Available Bikes is easiest to verify by demonstration: show the kiosk displaying the numbers. Click D on its row.
On screen: Show Available Bikes → D.
Test cases
Tests live in suites. Click New, choose Test Suite, give it the number TS-1 and the name Kiosk Acceptance Tests, and click Create.
On screen: + New ▾ → Test Suite… → TS-1 Kiosk Acceptance Tests.
On the suite, click Test Case, and name it Card Payment Time Test. Then click the plus in its Verifies column, and pick Pay at the Kiosk.
On screen: + Test Case → name → Verifies + → 5.1.1.
Type the expected result, and add the procedure as steps: click Steps, add each step with its action and expected result, and click Apply.
On screen: Expected Result; + Steps → two steps → Apply.
Run
Now run it. Click Run Tests. The dialog shows the procedure, the steps and the expected result. Record each step, describe the actual result, and click Pass.
On screen: Run Tests → step results → actual result → Pass.
The result is recorded with the tester, the date and the steps, and the test case now shows Passed. Close the dialog.
On screen: Close → Passed.
Recap
Let's recap. You learned the four verification methods, planned a method, level and success criteria, created a suite and a test case that verifies a requirement, wrote its steps, and ran it.
Next, the verification matrices: the RVTM and the VCRM, in Holarch and in Word and Excel.