Holarch
कोर्स के अध्याय

प्रशिक्षण · ट्रैक 6. Holarch पर माइग्रेट करना · 5 में से अध्याय 6.5

6.5 आयात के बाद सफ़ाई 2:40

डुप्लिकेट और कमज़ोर आवश्यकताएं खोजें, उन्हें ठीक करें, मॉडल जांच चलाएं, और अलग-अलग आई चीज़ों को जोड़ें।

Holarch 2.13 दिखाता है।

← 6.4 अन्य टूल से मॉडल · सभी अध्याय

आप क्या सीखेंगे

  • किसी आयात किए गए दस्तावेज़ पर गुणवत्ता जांच चलाएं और उसके निष्कर्ष पढ़ें
  • एक डुप्लिकेट आवश्यकता हटाएं और एक अस्पष्ट आवश्यकता को फिर से लिखें
  • पूरे मॉडल में अधूरे सिरे खोजने के लिए मॉडल जांच चलाएं
  • आयात की गई आवश्यकताओं को उन्हें संतुष्ट करने वाले एसेट से जोड़ें

Plant Inspection Drone मॉडल को उसके आयात के बाद साफ़ करें: डुप्लिकेट और कमज़ोर आवश्यकता खोजने के लिए आवश्यकता गुणवत्ता जांच चलाएं, एक को हटाएं और दूसरी को फिर से लिखें, मॉडल जांच चलाएं, और आयात की गई आवश्यकताओं को उन्हें संतुष्ट करने वाले आयात किए गए भागों तक ट्रेस करें।

प्रोजेक्ट फ़ाइलें

वीडियो holarch.app से चलता है; गोपनीयता नीति देखें।

अभ्यास

इसे Holarch में CubeSat EO-1 डेमो प्रोजेक्ट पर स्वयं करें।

  1. पिछले अध्यायों का अपना EO-1 Import Practice प्रोजेक्ट खोलें (या अध्याय 2 की तरह EO-1 की आवश्यकताओं की एक CSV आयात करें)।
  2. ज़रूरतें और आवश्यकताएं → गुणवत्ता खोलें, स्कोप बार में आयात किए गए दस्तावेज़ों में से एक चुनें, और गुणवत्ता जांचें पर क्लिक करें।
  3. यदि आपने वही आवश्यकताएं दो बार आयात की हैं (Word और ReqIF), तो डेटाबेस में किसी डुप्लिकेट की पंक्ति पर टिक करें और बल्क बार में आइटम हटाएं… से उसे हटाएं। 2.5 Safe Mode Recovery को फिर से लिखें ताकि वह मापने योग्य हो, फिर गुणवत्ता दोबारा जांचें।
  4. सत्यापन → मॉडल जांच खोलें और नियम Requirement.8, Leaf requirements no design entity meets खोलें।
  5. यदि आपने एसेट भी आयात किए हैं (अध्याय 4), तो 2.1 Pointing Accuracy चुनें, और ट्रेस में + → मौजूदा लिंक करें… से ADCS तक satisfied by जोड़ें। मॉडल जांच फिर से चलाएं।

आपका काम तब पूरा है जब 2.5 का स्कोर पहले से अधिक है और Requirement.8 अब 2.1 सूचीबद्ध नहीं करता।

स्वयं जांचें

  1. गुणवत्ता जांच किसे देखती है, और मॉडल जांच किसे देखती हैं?
  2. स्वचालित गुणवत्ता स्कोर कभी 78% से ऊपर क्यों नहीं जाता?
  3. माइग्रेशन के तुरंत बाद आवश्यकताओं और भागों को क्यों जोड़ें?
उत्तर दिखाएं
  1. गुणवत्ता जांच किसे देखती है, और मॉडल जांच किसे देखती हैं?

    गुणवत्ता जांच हर आवश्यकता के शब्दों को एक अच्छी आवश्यकता के गुणों के सापेक्ष स्कोर करती है। मॉडल जांच पूरे मॉडल में कमियां देखती हैं, जैसे ऐसी आवश्यकताएं जिन्हें कुछ भी संतुष्ट नहीं करता, अकेले खड़े आइटम या ऐसे एक्शन जिन्हें कोई नहीं करता।

  2. स्वचालित गुणवत्ता स्कोर कभी 78% से ऊपर क्यों नहीं जाता?

    सही और व्यवहार्य के लिए किसी व्यक्ति के निर्णय की ज़रूरत होती है, इसलिए जांच उन्हें कभी पूरा चिह्नित नहीं करती। आप आवश्यकता की समीक्षा के बाद उन्हें चिह्नित करते हैं।

  3. माइग्रेशन के तुरंत बाद आवश्यकताओं और भागों को क्यों जोड़ें?

    वे बिना आपसी लिंक के अलग-अलग फ़ाइलों से आती हैं। हर satisfied by लिंक तब से ट्रेसेबिलिटी, कवरेज और मॉडल जांच को डेटा देता है।

और पढ़ें

ट्रांसक्रिप्ट

ट्रांसक्रिप्ट दिखाएं (नरेशन और स्क्रीन पर क्या है)

Introduction

Chapter five: cleaning up after import. Imported data carries its old problems along, and the pieces arrive from different files unconnected. A short clean-up pass fixes both.

This is the last chapter of the migration track.

Quality check

Open Needs and Requirements, then Quality. Choose the imported tracker, and click Check Quality. Every requirement is scored against the qualities of a good requirement, and the findings say what to fix.

On screen: Quality → Document: PID Requirements Tracker → Check Quality.

Two findings stand out. Requirement 2.4 says the same thing as 2.1, in slightly different words: a duplicate from the old tracker. And 3.2 is vague: fast and easy to use cannot be measured, and the and joins two requirements in one.

On screen: Findings for 2.4 and 3.2.

Fix the findings

Remove the duplicate. In the Database, check the row of Crack Imaging, click Delete Entity in the bulk bar, and confirm.

On screen: Database → check 2.4 → Delete Entity… → Delete.

Then rewrite the vague one. Select Easy Operation, click its description, and replace it with something testable.

On screen: Easy Operation → Item → Description.

Run the quality check again. The duplicate is gone, and the rewritten requirement scores better.

On screen: Quality → Check Quality again.

Model checks

The model checks look at the whole model, not just the wording. Open Verification, then Model Checks. They list loose ends, such as requirements nothing satisfies yet, and each finding links to the item.

On screen: Verification → Model Checks.

Connect what came in

The requirements and the parts came from different files, so nothing connects them yet. Connect them. Select Crack Resolution in the Database. In Trace, click the plus on satisfied by, choose Link existing, and pick the camera payload.

On screen: 2.1 → Trace → satisfied by + → Link existing… → Camera Payload.

Wall Thickness is satisfied by the ultrasonic probe, in the same way. Each link you add now feeds traceability, coverage and the model checks from here on.

On screen: 2.2 → Trace → satisfied by + → Link existing… → Ultrasonic Probe.

Recap

Let's recap. You ran the quality check, removed a duplicate, rewrote a weak requirement, ran the model checks, and connected the imported requirements to the imported parts.

That completes Migrating to Holarch. You can now plan a migration, bring in spreadsheets, Word documents, ReqIF files and models from other tools, and clean up what arrives.

On screen: Track complete card, then end card.