Holarch
कोर्स के अध्याय

प्रशिक्षण · ट्रैक 7. प्रक्रिया का पालन · 4 में से अध्याय 7.1

7.1 प्रक्रिया गाइड चुनना 3:08

किसी प्रोजेक्ट को सिस्टम्स इंजीनियरिंग जीवन चक्र से होकर आगे बढ़ाएं।

Holarch 2.41 दिखाता है।

आप क्या सीखेंगे

  • छह प्रक्रिया गाइड और हर एक जिन स्रोतों पर आधारित है, उनकी तुलना करें
  • किसी प्रोजेक्ट के लिए प्रक्रिया गाइड चालू करें
  • किसी गाइड का जीवन चक्र, चरण और स्टेप या प्रक्रिया कार्ड पढ़ें
  • हर गाइड की जगह खोए बिना गाइडों के बीच स्विच करें

Bike-Share Dock प्रोजेक्ट के लिए Holarch की SE प्रक्रिया गाइड चालू करें: चुनने के लिए छह प्रक्रियाएं (Kossiakoff SE पद्धति, ISO/IEC/IEEE 15288, NASA प्रोजेक्ट जीवन चक्र, DoD अधिग्रहण जीवन चक्र, MIL-STD-499B प्रक्रिया लूप और Vee मॉडल), अपने स्टेज और चरणों वाला जीवन चक्र, किसी चरण के स्टेप, और अपनी जगह खोए बिना प्रक्रियाओं के बीच स्विच करना।

प्रोजेक्ट फ़ाइलें

वीडियो holarch.app से चलता है; गोपनीयता नीति देखें।

अभ्यास

इसे Holarch में CubeSat EO-1 डेमो प्रोजेक्ट पर स्वयं करें।

  1. अपना EO-1 डेमो प्रोजेक्ट खोलें (यदि आपके पास नहीं है, तो उसे बनाएं: प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → नया डेमो प्रोजेक्ट → CubeSat (गाइडेड सिस्टम्स इंजीनियरिंग))। रेल में प्लान → SE प्रक्रिया खोलें।
  2. सूची में Vee मॉडल और फिर DoD अधिग्रहण जीवन चक्र चुनें, और हर एक का सारांश और स्रोत पढ़ें।
  3. ISO/IEC/IEEE 15288 चुनें और यह प्रक्रिया उपयोग करें पर क्लिक करें।
  4. Concept स्टेज पढ़ें: तकनीकी प्रक्रिया कार्ड, फिर उनके बाद तकनीकी प्रबंधन प्रक्रियाएं, और ध्यान दें कि EO-1 पहले से कौन-सी जांचें पूरी करता है।
  5. प्रक्रिया में Vee मॉडल पर स्विच करें, उसका पहला चरण देखें, फिर वापस ISO/IEC/IEEE 15288 पर स्विच करें।

आपका काम तब पूरा है जब SE प्रक्रिया पेज ISO/IEC/IEEE 15288 दिखाता है और उसका Concept स्टेज वर्तमान के रूप में चिह्नित है।

स्वयं जांचें

  1. क्या प्रक्रिया गाइड चालू करने से मॉडल बदलता है?
  2. आप एक गाइड से दूसरी पर और फिर वापस स्विच करते हैं। आपके टिक और गेट का क्या होता है?
  3. आप गाइडों में से कैसे चुनते हैं?
उत्तर दिखाएं
  1. क्या प्रक्रिया गाइड चालू करने से मॉडल बदलता है?

    नहीं। गाइड मॉडल पढ़ती है और दिखाती है कि हर चरण को अभी क्या चाहिए। प्रक्रिया का चुनाव प्रोजेक्ट के साथ सहेजा जाता है और उसके सदस्यों के साथ साझा होता है, और ⌘Z / Ctrl+Z उसे पूर्ववत करता है।

  2. आप एक गाइड से दूसरी पर और फिर वापस स्विच करते हैं। आपके टिक और गेट का क्या होता है?

    हर प्रक्रिया अपना वर्तमान चरण, टिक की गई जांचें और गेट रखती है, इसलिए वापस स्विच करने पर आप वहीं लौटते हैं जहाँ आप थे।

  3. आप गाइडों में से कैसे चुनते हैं?

    वह चुनें जिसका आपका प्रोग्राम या कोर्स पालन करता है: हर गाइड की संरचना उसके नीचे बताए गए स्रोतों का पालन करती है, जैसे NASA जीवन चक्र के लिए NPR 7123.1। विवरण और जांचें Holarch की अपनी हैं।

और पढ़ें

ट्रांसक्रिप्ट

ट्रांसक्रिप्ट दिखाएं (नरेशन और स्क्रीन पर क्या है)

Introduction

Welcome to Track 7, following a process. A model tells you what you have built. A process guide tells you what to do next, and checks the model to show how far each phase has come.

In this chapter you turn on a process guide for the Bike-Share Dock project, and learn how a guide is laid out.

The process guides

Open Plan and Deliver in the rail, then SE Process. Until a project uses a guide, the page explains what a guide does and lists the processes you can follow.

On screen: Plan & Deliver → SE Process.

There are six. The Kossiakoff systems engineering method, ISO/IEC/IEEE 15288, the NASA project life cycle, the DoD acquisition life cycle, the MIL-STD-499B process loop, and the Vee model. Each has a one-line summary.

On screen: The six processes.

Select one to read more about it. The NASA life cycle runs from concept studies to closeout, and each phase ends at a key decision point. The line at the bottom names the sources the guide is based on: here NPR 7123.1 and the NASA Systems Engineering Handbook.

On screen: Select NASA project life cycle; its intro and sources.

Turn on a guide

For this project, choose the Kossiakoff method. It is based on the method described by Kossiakoff and his co-authors in Systems Engineering Principles and Practice. Click Use This Process.

On screen: Select Kossiakoff SE method → Use This Process.

Life cycle, phases and steps

The life cycle appears at the top. Kossiakoff has three stages: concept development, engineering development, and post-development, in eight phases. Each phase shows how much of its work is done, and the first phase, needs analysis, is marked current.

On screen: The life cycle: stages, phases, percentages, Current.

Below it is the phase you are looking at, with its aim: show that a real need exists, and that a system to meet it is feasible.

On screen: Phase card: Needs analysis and its aim.

Then come the four steps of the method, which repeat in every phase: requirements analysis, functional definition, physical definition, and design validation. Each step lists the checks for this phase. The next chapter works through them.

On screen: The four step cards.

Switch guides

A project can switch guides at any time. Choose ISO/IEC/IEEE 15288 in the Process list. Its six life-cycle stages run from concept to retirement, and the technical processes of the standard become the cards, with the technical management processes after them.

On screen: Process ▾ → ISO/IEC/IEEE 15288.

Switch back to the Kossiakoff method. Each guide keeps its own current phase, ticked checks and gates, so switching back brings you to where you were.

On screen: Process ▾ → Kossiakoff SE method.

Recap

Let's recap. You opened the SE Process page, compared the six guides and their sources, turned on the Kossiakoff method, read its life cycle, phases and steps, and switched guides without losing your place.

Next, you work through the checks of the first phase.