Holarch
कोर्स के अध्याय

प्रशिक्षण · ट्रैक 2. आवश्यकताएं और सत्यापन · 6 में से अध्याय 2.2

2.2 ज़रूरतों को आवश्यकताओं तक ट्रेस करना 2:07

हर आवश्यकता को उस ज़रूरत या बाधा तक ट्रेस करें जिससे वह आती है, और कमियां खोजें।

Holarch 1.27 दिखाता है।

आप क्या सीखेंगे

  • इंस्पेक्टर में किसी आवश्यकता को उस ज़रूरत तक ट्रेस करें जिससे वह आती है
  • एक पंक्ति क्वेरी और एक कॉलम क्वेरी से ट्रेसेबिलिटी मैट्रिक्स बनाएं
  • मैट्रिक्स में सेल पर क्लिक करके ट्रेस लिंक बनाएं
  • केवल कमियां से बिना ट्रेस वाली आवश्यकताएं खोजें और तय करें कि हर कमी को कैसे दूर करना है

Bike-Share Dock की आवश्यकताओं को उन हितधारक ज़रूरतों और बाधाओं तक ट्रेस करें जिनसे वे आती हैं: इंस्पेक्टर में एक लिंक, दो क्वेरी से बने ट्रेसेबिलिटी मैट्रिक्स में कई लिंक, फिर कमियां: बिना स्रोत वाली आवश्यकताएं, जो किसी गायब ज़रूरत या ऐसी आवश्यकता की ओर इशारा करती हैं जिसे किसी ने नहीं मांगा।

प्रोजेक्ट फ़ाइलें

वीडियो holarch.app से चलता है; गोपनीयता नीति देखें।

अभ्यास

इसे Holarch में CubeSat EO-1 डेमो प्रोजेक्ट पर स्वयं करें।

  1. अपना EO-1 डेमो प्रोजेक्ट खोलें (या उसे बनाएं: प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → नया डेमो प्रोजेक्ट → CubeSat (गाइडेड सिस्टम्स इंजीनियरिंग))।
  2. डेटाबेस में 1.6.2 Off-Nadir Imaging चुनें। ट्रेस में traced from पर (यदि वह सूचीबद्ध नहीं है तो सभी संबंध दिखाएं पर टिक करें), + → मौजूदा लिंक करें… पर क्लिक करें, N2 Twice-Weekly Revisit पर टिक करें और चयनित लिंक करें पर क्लिक करें।
  3. सत्यापन → ट्रेसेबिलिटी मैट्रिक्स खोलें। पंक्तियां क्वेरी class:Requirement से, कॉलम क्वेरी number:N* से सेट करें, और संबंध traced from चुनें।
  4. N2 Twice-Weekly Revisit के नीचे 1.5 Daily Collection Volume की खाली सेल पर क्लिक करें: दैनिक मात्रा ही रिविज़िट को संभव बनाती है।
  5. केवल कमियां पर टिक करें। 1.7 Mission Lifetime के लिए गायब ज़रूरत जोड़ें: अगले खाली N नंबर (जैसे N4) के साथ एक Statement Two Growing Seasons बनाएं, फिर उसे मैट्रिक्स में 1.7 से लिंक करें।
  6. जांचे गए चरण-दर-चरण अभ्यास के लिए ट्यूटोरियल 3 Trace Requirements चलाएं (सहायता → ट्यूटोरियल)।

आपका काम तब पूरा है जब केवल कमियां पर टिक होने पर 1.5, 1.6.2 और 1.7 अब नहीं दिखते।

स्वयं जांचें

  1. ज़रूरतों को आवश्यकताओं तक ट्रेस करना किन तीन प्रश्नों का उत्तर देता है?
  2. केवल कमियां बिना स्रोत वाली एक आवश्यकता दिखाता है। क्या सही समाधान हमेशा उसे निकटतम ज़रूरत से लिंक करना है?
  3. लिंक करने के लिए ट्रेसेबिलिटी मैट्रिक्स कब इंस्पेक्टर से बेहतर है?
उत्तर दिखाएं
  1. ज़रूरतों को आवश्यकताओं तक ट्रेस करना किन तीन प्रश्नों का उत्तर देता है?

    कोई आवश्यकता क्यों है, क्या हर ज़रूरत किसी आवश्यकता से कवर है, और किसी ज़रूरत के बदलने पर कौन-सी आवश्यकताएं बदलती हैं।

  2. केवल कमियां बिना स्रोत वाली एक आवश्यकता दिखाता है। क्या सही समाधान हमेशा उसे निकटतम ज़रूरत से लिंक करना है?

    नहीं। या तो कोई ज़रूरत गायब है और उसे जोड़ा जाना चाहिए, या आवश्यकता की ज़रूरत नहीं है और उसे हटाया जाना चाहिए। केवल कमी भरने के लिए बनाया गया लिंक प्रश्न को छिपा देता है।

  3. लिंक करने के लिए ट्रेसेबिलिटी मैट्रिक्स कब इंस्पेक्टर से बेहतर है?

    जब आप आइटम के दो सेटों के बीच कई लिंक बनाते हैं: आप पूरा ग्रिड देखते हैं, हर लिंक एक क्लिक से बनाते हैं और कमियां तुरंत देखते हैं।

और पढ़ें

ट्रांसक्रिप्ट

ट्रांसक्रिप्ट दिखाएं (नरेशन और स्क्रीन पर क्या है)

Introduction

Chapter two: tracing needs to requirements. Every requirement should come from somewhere: a stakeholder need, a constraint, or a higher requirement. Tracing records where.

We trace the Bike-Share Dock's requirements to its needs and constraints.

Why trace

Tracing answers three questions. Why does this requirement exist? Is every need covered by a requirement? And when a need changes, which requirements change with it?

On screen: Card: why trace.

One link

One link at a time works in the inspector. In the Database, select Show Available Bikes. In its Trace section, add a traced from link to the need Find a Bike Nearby.

On screen: 4.1.1 → Trace → traced from + → Link existing… → N.1.

Many links

For many links, use the Traceability Matrix. Open Verification, then Traceability Matrix. Click Rows, and set them from a query: every requirement.

On screen: Verification → Traceability Matrix → Rows → Query → class:Requirement.

Set the columns from a query too: the needs and constraints, whose numbers start with N and C. Then choose the relationship, traced from.

On screen: Columns → Query → number:N.* OR number:C.* → Relationship: traced from.

Each click on an empty cell creates a link. Detect a Returned Bike comes from the operator's need to return bikes without staff. The two design constraints, the footprint and the anchoring, come from the sidewalk constraint.

On screen: Click three cells.

Find the gaps

Now look for gaps. Check Gaps only: the matrix keeps the requirements that are traced to nothing in the columns.

On screen: Gaps only.

Each gap is a question for the team. Either a need is missing, such as the rider's need to pay quickly, or the requirement is not needed. Add the missing need, or delete the requirement, but do not leave it untraced.

On screen: The gaps.

Recap

Let's recap. You traced one requirement in the inspector, built a Traceability Matrix from two queries, created links with a click, and found the requirements that still have no source.

Next, open items and approvals.