कोर्स के अध्याय
प्रशिक्षण · ट्रैक 14. स्प्रेडशीट · 5 में से अध्याय 14.4
14.4 चार्ट और मॉडल डेटा 2:47
किसी रेंज का चार्ट बनाएं और उसका अक्ष फ़ॉर्मेट करें, एक लाइव मॉडल तालिका सम्मिलित करें, और SUMIFS और HOLARCH.VALUE से मॉडल के मान पढ़ें।
Holarch 2.35 दिखाता है।
आप क्या सीखेंगे
- किसी रेंज का चार्ट बनाएं और चार्ट को डेटा के बगल में ले जाएं
- अक्ष फ़ॉर्मेट करें में अक्ष की सीमाएं और इकाइयां सेट करें
- लाइव मॉडल डेटा की एक मॉडल तालिका सम्मिलित करें
- SUMIFS से मॉडल के मानों का योग करें और HOLARCH.VALUE से एक मान पढ़ें
- देखें कि मॉडल का बदलाव शीट और चार्ट तक कैसे पहुंचता है
EO-1 द्रव्यमान बजट का चार्ट बनाएं और उसे जोड़ें: सबसिस्टम द्रव्यमानों का एक कॉलम चार्ट सम्मिलित करें और अक्ष फ़ॉर्मेट करें में उसका मान अक्ष सेट करें, हर एसेट की संख्या और द्रव्यमान के साथ एक लाइव, केवल-पढ़ने योग्य मॉडल तालिका सम्मिलित करें, टाइप किए गए अनुमानों को तालिका पर SUMIFS से बदलें, HOLARCH.VALUE से मॉडल का द्रव्यमान आवंटन पढ़ें, फिर मॉडल में एक द्रव्यमान बदलें और बजट को उसके साथ बदलते देखें।
प्रोजेक्ट फ़ाइलें
- शुरुआती प्रोजेक्ट (.holarch.json; प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → प्रोजेक्ट आयात करें (.json)…)
- पूरा किया गया प्रोजेक्ट (.holarch.json; प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → प्रोजेक्ट आयात करें (.json)…)
वीडियो holarch.app से चलता है; गोपनीयता नीति देखें।
अभ्यास
यह स्वयं Holarch में, CubeSat EO-1 पर करें।
- अध्याय की शुरुआती फ़ाइल खोलें, या अध्याय 14.3 की अपनी वर्कबुक।
- B2:C8 चुनें, चार्ट खोलें और कॉलम चुनें। चार्ट को बजट के दाईं ओर खींचें।
- चार्ट पर राइट-क्लिक करें, लंबवत अक्ष फ़ॉर्मेट करें… चुनें, अधिकतम
5और मुख्य इकाई1पर सेट करें। Modelनाम की एक शीट जोड़ें। A1 में मॉडल तालिका… पर क्लिक करें, क्लास Asset चुनें, संख्या और Mass पर टिक करें, उसका नामPartsरखें और सम्मिलित करें पर क्लिक करें।- बजट पर C3 में
=SUMIFS(Parts[Mass],Parts[Number],A3&"*")टाइप करें और उसे C8 तक नीचे भरें। Assumptions पर B1 में=HOLARCH.VALUE("Spacecraft Mass","Threshold Value","kg")टाइप करें। - डेटाबेस में Payload Camera का द्रव्यमान 2.4 से 2.9 kg करें और स्प्रेडशीट पर वापस जाएं।
आपका काम तब पूरा है जब द्रव्यमान मॉडल से आते हैं, आवंटन मॉडल से 12 पढ़ता है, और योग, मार्जिन और चार्ट Payload Camera के बदलाव के साथ बदलते हैं।
स्वयं जांचें
- क्या कोई स्प्रेडशीट मॉडल बदल सकती है?
- SUMIFS मानदंड में A3&"*" किससे मेल खाता है?
- आप चार्ट अक्ष का अधिकतम और मुख्य इकाई कहाँ सेट करते हैं?
उत्तर दिखाएं
क्या कोई स्प्रेडशीट मॉडल बदल सकती है?
नहीं। मॉडल तालिकाएं और HOLARCH फ़ंक्शन मॉडल पढ़ते हैं; स्प्रेडशीट उसमें कभी नहीं लिखती।
SUMIFS मानदंड में A3&"*" किससे मेल खाता है?
हर भाग संख्या जो सबसिस्टम की संख्या से शुरू होती है, जैसे 1.1 के लिए 1.1.1 और 1.1.2।
आप चार्ट अक्ष का अधिकतम और मुख्य इकाई कहाँ सेट करते हैं?
अक्ष फ़ॉर्मेट करें में, जो चार्ट के राइट-क्लिक मेनू से खुलता है; खाली बॉक्स मान को स्वचालित रखता है।
और पढ़ें
ट्रांसक्रिप्ट
ट्रांसक्रिप्ट दिखाएं (नरेशन और स्क्रीन पर क्या है)
Introduction
Chapter four: charts and model data. A chart shows the budget at a glance. And a spreadsheet can read the model, so the budget stays current without retyping.
In this chapter you chart the budget, then feed it from the model.
Charts
Select the subsystems and their masses, B2 to C8. Open Chart, and choose Column.
On screen: Name Box B2:C8 → Chart ▾ → Column.
The chart floats over the sheet. Drag it to the right of the budget, so the totals stay in view.
On screen: Drag the chart right of column E.
The chart follows its cells. Right-click it for its menu, and choose Format Vertical Axis.
On screen: Right-click the chart → Format Vertical Axis….
Format Axis sets the bounds and units. Set the maximum to five and the major unit to one. Leave a box empty to keep it automatic. Close the panel.
On screen: Maximum 5, Major 1 → close.
Model data
The masses so far are typed estimates. The model holds the current mass of every component, so read them from there. Add a sheet, and name it Model.
On screen: + → Model.
Select A1, and click Model Table. Choose the class Asset, tick Number and Mass, name the table Parts, and click Insert.
On screen: A1 → Model Table… → Class Asset; Number, Mass; name Parts → Insert.
The table lists every asset with its number and mass, live and read-only. A spreadsheet reads the model, and never writes to it.
On screen: The Parts table.
Back in the budget, replace the estimate in C3. The SUMIFS function adds the masses of the parts whose number starts with the subsystem's number.
On screen: Budget → C3: =SUMIFS(Parts[Mass],Parts[Number],A3&"*") ↵.
Fill it down to C8. Every subsystem now adds up its components from the model.
On screen: Name Box C3:C8 → Fill ▾ → Fill Down.
HOLARCH.VALUE reads one value of one item, in the unit you ask for. On the Assumptions sheet, the allocation becomes the threshold of the spacecraft mass measure in the model.
On screen: Assumptions → B1: =HOLARCH.VALUE("Spacecraft Mass","Threshold Value","kg") ↵.
The sheet follows the model
Now change the model. In the Database, open the payload camera's mass, and change it from two point four to two point nine kilograms.
On screen: Database → Payload Camera → Mass 2.4 → 2.9.
Back in the spreadsheet, with its editor tab. The payload camera's mass, the totals, the margin and the chart have all followed, with no edit to the sheet.
On screen: Editor tab → Budget: 2.90 kg, totals, margin, chart.
Recap
To recap: chart a range and format its axis, insert a Model Table for live model data, sum it with SUMIFS, and read single values with HOLARCH.VALUE.
In the last chapter, you import an Excel workbook and get AI help with formulas.