Holarch
कोर्स के अध्याय

प्रशिक्षण · ट्रैक 7. प्रक्रिया का पालन · 4 में से अध्याय 7.2

7.2 लाइव जांचें और वह काम जिसकी ओर वे इशारा करती हैं 2:21

मॉडल को आपको बताने दें कि क्या पूरा है और आगे क्या है।

Holarch 2.41 दिखाता है।

आप क्या सीखेंगे

  • किसी जांच की स्थिति (पूरी, आंशिक रूप से पूरी, शुरू नहीं हुई) और उसका विवरण पढ़ें
  • किसी जांच के खोलें लिंक से उस पेज पर जाएं जहाँ काम होता है
  • किसी जांच का काम पूरा करें और जांच और चरण को अपडेट होते देखें
  • किसी मैन्युअल जांच पर टिक करें और समझाएं कि Holarch उसके साथ क्या दर्ज करता है

Kossiakoff गाइड के ज़रूरत विश्लेषण चरण से होकर काम करें: वे जांचें जिन्हें Holarch मॉडल से पढ़ता है, उनकी स्थिति और विवरण के साथ, उस पेज का खोलें लिंक जहाँ काम होता है, टेम्पलेट से बनाया गया एक Concept of Operations जो अपनी जांच को पूरा कर देता है, और हाथ से टिक की गई मैन्युअल जांचें, किसने और कब के साथ।

प्रोजेक्ट फ़ाइलें

वीडियो holarch.app से चलता है; गोपनीयता नीति देखें।

अभ्यास

इसे Holarch में CubeSat EO-1 डेमो प्रोजेक्ट पर स्वयं करें।

  1. अपना EO-1 डेमो प्रोजेक्ट खोलें (यदि आपके पास नहीं है, तो उसे बनाएं: प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → नया डेमो प्रोजेक्ट → CubeSat (गाइडेड सिस्टम्स इंजीनियरिंग))। प्लान → SE प्रक्रिया खोलें और Kossiakoff SE पद्धति चुनें (प्रक्रिया में, या उसे चुनकर यह प्रक्रिया उपयोग करें पर क्लिक करें)।
  2. ज़रूरत विश्लेषण में पढ़ें कि कौन-सी जांचें पूरी हैं और उनके विवरण क्या गिनते हैं, उदाहरण के लिए ज़रूरतें N1–N3।
  3. ज़रूरत विश्लेषण दस्तावेज़ जांच के बगल में खोलें पर क्लिक करें। + नया दस्तावेज़ पर क्लिक करें, EO-1 Needs Analysis दर्ज करें, इसके लिए टेम्पलेट के अंतर्गत ज़रूरत विश्लेषण दस्तावेज़ चुनें, टेम्पलेट कार्ड चुनें, और बनाएं पर क्लिक करें।
  4. SE प्रक्रिया पर लौटें और जांचें कि दस्तावेज़ जांच पूरी है और चरण का प्रतिशत बढ़ गया है।
  5. मौजूदा सिस्टम और तकनीकों के सर्वेक्षण वाली मैन्युअल जांच पर टिक करें, पढ़ें कि किसने और कब उस पर टिक किया, फिर ⌘Z / Ctrl+Z दबाएं और उस पर फिर से टिक करें।

आपका काम तब पूरा है जब ज़रूरत विश्लेषण दस्तावेज़ जांच पूरी है और सर्वेक्षण जांच आपका नाम और समय दिखाती है।

स्वयं जांचें

  1. चिह्न वाली जांच और चेकबॉक्स वाली जांच में क्या अंतर है?
  2. EO-1 अपनी ज़रूरतों को Statement के रूप में दर्ज करता है। वे ज़रूरतों के रूप में क्यों गिनी जाती हैं, जबकि उसके अनुभाग शीर्षक नहीं?
  3. खोलें आपको कहाँ ले जाता है?
उत्तर दिखाएं
  1. चिह्न वाली जांच और चेकबॉक्स वाली जांच में क्या अंतर है?

    चिह्न (✓, ◐ या ○) मॉडल से पढ़ा जाता है और मॉडल बदलने पर बदलता है। चेकबॉक्स उस निर्णय के लिए है जिसे मॉडल नहीं दिखा सकता, जैसे व्यवहार्यता; उस पर टिक करने से दर्ज होता है कि किसने और कब।

  2. EO-1 अपनी ज़रूरतों को Statement के रूप में दर्ज करता है। वे ज़रूरतों के रूप में क्यों गिनी जाती हैं, जबकि उसके अनुभाग शीर्षक नहीं?

    ज़रूरत जांचें आवश्यकताओं तक ट्रेस किए गए Statement गिनती हैं। किसी दस्तावेज़ में अनुभाग Statement तभी ज़रूरत के रूप में गिना जाता है जब वह ट्रेस हो जाए। Requirement के रूप में दर्ज ज़रूरतें, ज़रूरतों के रूप में नहीं गिनी जातीं।

  3. खोलें आपको कहाँ ले जाता है?

    उस पेज पर जहाँ उस जांच का काम होता है, जैसे दस्तावेज़, गुणवत्ता, ट्रेसेबिलिटी मैट्रिक्स या फ़ंक्शनल विश्लेषण। जांच को अपडेट होते देखने के लिए SE प्रक्रिया पर वापस आएं।

और पढ़ें

ट्रांसक्रिप्ट

ट्रांसक्रिप्ट दिखाएं (नरेशन और स्क्रीन पर क्या है)

Introduction

Chapter two: live checks. Most checks in a process guide are read from the model, so they change as the model changes. The rest are checks only people can make.

We continue on the Bike-Share Dock, in the needs analysis phase of the Kossiakoff guide.

Reading a check

Open Plan and Deliver, then SE Process. Each check has a mark in front of it: a tick when it is done, a half circle when it is partly done, and an empty circle when there is nothing yet.

On screen: Plan & Deliver → SE Process; the step cards.

Under each check, a short detail says what Holarch found. Record the stakeholder needs is done: the project already has its needs as statements. The project also has top-level functions and assets, so those checks are done too.

On screen: Done checks and their details.

From a check to the work

Describe how the system will be used is not done yet. Its detail says there is no concept of operations document. Click Open next to it.

On screen: Concept of Operations check → Open.

Open goes to the page where the work happens, here Documents. Click New Document, choose the type Concept of Operations Document, name it Bike-Share Dock Concept of Operations, and click Next.

On screen: Documents → + New Document → type, name, number → Next.

Choose the outline template, and click Finish. The new document has the usual sections of a concept of operations, ready to write.

On screen: Template: Concept of Operations (Outline) → Finish.

Go back to SE Process. The check is done now, and its detail counts the document. The needs analysis phase in the life cycle shows the higher percentage.

On screen: SE Process: the check is done; the phase percentage.

Checks people make

Some checks cannot be read from the model, such as whether meeting the needs is feasible. These have a checkbox instead of a mark. When your team has made the check, tick it.

On screen: Manual check: feasibility → tick.

Holarch records who ticked it, and when. Clear the box to take it back, and like every change, a tick is one undo step.

On screen: Checked by … on ….

Recap

Let's recap. Each check shows its state and what Holarch found. Open leads to the page where the work happens, the check follows the model as you work, and the checks only people can make are ticked by hand, with who and when.

Next, you move between phases and prepare a gate review.