कोर्स के अध्याय
प्रशिक्षण · ट्रैक 4. दस्तावेज़ और डिलीवरेबल · 5 में से अध्याय 4.2
4.2 दस्तावेज़ों में लाइव मैट्रिक्स 2:48
ऐसी RVTM और RTM तालिकाएं सम्मिलित करें जो मॉडल से अपने आप फिर से बनती हैं।
Holarch 1.27 दिखाता है।
आप क्या सीखेंगे
- किसी दस्तावेज़ के टेक्स्ट में लाइव मैट्रिक्स सम्मिलित करें और उसका दायरा चुनें
- मैट्रिक्स द्वारा उजागर की गई कमियां पढ़ें
- मॉडल में कोई कमी दूर करें और मैट्रिक्स को अपडेट होते देखें
- मानक मैट्रिक्स के नाम बताएं और यह कि हर एक किसे कमी के रूप में चिह्नित करता है
Bike-Share Dock विनिर्देश में खाली सत्यापन तालिका को एक लाइव आवश्यकता सत्यापन ट्रेसेबिलिटी मैट्रिक्स से बदलें, उसका दायरा चुनें, उसके द्वारा उजागर की गई कमियां पढ़ें, मॉडल में एक कमी दूर करें और मैट्रिक्स को अपडेट होते देखें, फिर उसी तरह एक आवश्यकता ट्रेसेबिलिटी मैट्रिक्स जोड़ें।
प्रोजेक्ट फ़ाइलें
- शुरुआती प्रोजेक्ट (.holarch.json; प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → प्रोजेक्ट आयात करें (.json)…)
- पूरा किया गया प्रोजेक्ट (.holarch.json; प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → प्रोजेक्ट आयात करें (.json)…)
वीडियो holarch.app से चलता है; गोपनीयता नीति देखें।
अभ्यास
इसे Holarch में CubeSat EO-1 डेमो प्रोजेक्ट पर स्वयं करें।
- अपना EO-1 डेमो प्रोजेक्ट खोलें, या उसे बनाएं: प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → नया डेमो प्रोजेक्ट → CubeSat (गाइडेड सिस्टम्स इंजीनियरिंग)।
- ज़रूरतें और आवश्यकताएं → दस्तावेज़ → EO-1 System Requirements Specification खोलें और अनुभाग 2 Attitude Determination and Control को संपादित करने के लिए उसके विवरण पर क्लिक करें।
- रिच-टेक्स्ट टूलबार में + खोलें और मैट्रिक्स… चुनें। आवश्यकता आवंटन मैट्रिक्स चुनें, दायरा इसी दस्तावेज़ पर रहने दें, सम्मिलित करें पर क्लिक करें और सहेजने के लिए ⌘ / Ctrl↵ दबाएं।
- कैप्शन और छायांकित पंक्तियां पढ़ें। 2.5 Safe Mode Recovery एक कमी है: कुछ भी उसे संतुष्ट नहीं करता।
- 2.5 चुनें और उसके ट्रेस अनुभाग में satisfied by के अंतर्गत F10 Enter Safe Mode लिंक करें। अनुभाग 2 पर वापस जाएं और मैट्रिक्स फिर से पढ़ें।
आपका काम तब पूरा है जब आवंटन मैट्रिक्स की 2.5 पंक्ति F10 Enter Safe Mode सूचीबद्ध करती है और अब छायांकित नहीं है।
स्वयं जांचें
- लाइव मैट्रिक्स आपकी टाइप की गई तालिका से कैसे अलग है?
- आप कमी को मैट्रिक्स में नहीं, मॉडल में क्यों दूर करते हैं?
- मैट्रिक्स किन दायरों को कवर कर सकता है?
उत्तर दिखाएं
लाइव मैट्रिक्स आपकी टाइप की गई तालिका से कैसे अलग है?
ब्लॉक केवल यह संग्रहीत करता है कि कौन-सा मैट्रिक्स और दायरा दिखाना है। हर बार दस्तावेज़ दिखाए या निर्यात किए जाने पर Holarch मॉडल से पंक्तियां फिर से बनाता है, इसलिए वह कभी पुराना नहीं होता।
आप कमी को मैट्रिक्स में नहीं, मॉडल में क्यों दूर करते हैं?
लाइव मैट्रिक्स को सेल-दर-सेल संपादित नहीं किया जा सकता। कमी मॉडल में एक गायब लिंक या एट्रिब्यूट है, और उसे वहाँ ठीक करने से उसे दिखाने वाला हर मैट्रिक्स और व्यू अपडेट हो जाता है।
मैट्रिक्स किन दायरों को कवर कर सकता है?
एक दस्तावेज़ के आइटम, किसी संकलन के सभी भाग, या पूरा प्रोजेक्ट। इंटरफ़ेस और N² मैट्रिक्स किसी एक Asset या Action के चाइल्ड को भी कवर कर सकते हैं।
और पढ़ें
ट्रांसक्रिप्ट
ट्रांसक्रिप्ट दिखाएं (नरेशन और स्क्रीन पर क्या है)
Introduction
Chapter two: live matrices in documents. Reviewers ask for traceability and verification matrices. In Holarch you don't fill them in by hand: a matrix in a document is rebuilt from the model whenever it is shown or exported.
You will insert a verification matrix into a specification, choose its scope, read the gaps it highlights, close a gap in the model, and add a traceability matrix.
Insert a matrix
Open the Bike-Share Dock system requirements. Its template ends with a verification approach, and section 11.1, Verification Matrix, holds an empty table to fill in by hand.
On screen: Documents → the SRS → Outline → 11.1 Verification Matrix.
Replace it with a live matrix. Click the section's text to edit it, select the empty table, and delete it.
On screen: Edit 11.1 → select → delete.
Open the plus menu, and choose Matrix. Pick the Requirements Verification Traceability Matrix. The scope starts on this document, which holds three of the project's six requirements. Choose Whole project, to cover them all.
On screen: + → Matrix… → RVTM → Scope: Whole project.
The preview lists each requirement with its verification method, its level, the test cases that verify it, and its status. Click Insert, then press Command Return to save the text.
On screen: Insert → Save.
Read the gaps
The matrix sits in the document with a dashed outline. Two rows are shaded as gaps. Show Available Bikes has a method but no test case yet. Anchored Without Digging has no verification method at all.
On screen: The live RVTM in 11.1, two gaps.
Close a gap
Close one gap in the model. Go to section 10, and select 10.2, Anchored Without Digging. In the inspector, click + Label and choose Inspection. The verification method is both a label and an attribute, so either one sets it.
On screen: Outline → 10.2 → inspector + Label → Inspection.
Go back to the matrix. The row for 10.2 now shows Inspection, without touching the matrix. It is still shaded, because no test case verifies it yet: the matrix shows the model as it is.
On screen: Outline → 11.1: the 10.2 row now shows Inspection.
Add an RTM
Add a traceability matrix the same way. Go to section 12, Traceability, edit its text, and insert the Requirements Traceability Matrix for the whole project: each requirement with its parent, the needs it traces from, what it traces to, and what satisfies it.
On screen: 12 Traceability → + → Matrix… → RTM → Whole project → Insert → Save.
Recap
The verification cross-reference matrix, with one column per method, works the same way. Let's recap. You inserted live matrices, chose their scope, read the gaps, and closed one in the model.
Next, you turn the document and its matrices into Word and Excel files.