Holarch
कोर्स के अध्याय

प्रशिक्षण · ट्रैक 1. शुरुआत · 8 में से अध्याय 1.4

1.4 आपका पहला आरेख 4:00

मॉडल को बनाएं, आरेख पर उसमें जोड़ें, और हर व्यू में एक ही मॉडल देखें।

Holarch 1.27 दिखाता है।

आप क्या सीखेंगे

  • + नया आरेख से किसी सिस्टम का Asset आरेख बनाएं
  • आरेख पर दिखाएं कि हर भाग कौन-से फ़ंक्शन करता है
  • आरेख पर एक भाग और एक कंड्यूट जोड़ें और उन्हें डेटाबेस में खोजें
  • उन्हीं आइटम को पदानुक्रम के रूप में देखने के लिए आरेख का प्रकार बदलें
  • एक स्पाइडर आरेख बनाएं जो किसी एक आवश्यकता के आसपास का ट्रेस दिखाए

मौजूदा सिस्टम आइटम से Bike-Share Dock का एक Asset आरेख बनाएं: Holarch संबंधों से उसके भाग और उनके फ़ंक्शन बनाता है। बाहरी बैक ऑफ़िस और एक कंड्यूट, एक नया भाग और एक पावर केबल जोड़ें, आरेख पर किसी भाग का नाम बदलें और डेटाबेस में बदलाव देखें, फिर उन्हीं आइटम को पदानुक्रम के रूप में देखें और स्पाइडर आरेख से एक आवश्यकता ट्रेस करें।

प्रोजेक्ट फ़ाइलें

वीडियो holarch.app से चलता है; गोपनीयता नीति देखें।

अभ्यास

इसे Holarch में CubeSat EO-1 डेमो प्रोजेक्ट पर स्वयं करें।

  1. अपना EO-1 डेमो प्रोजेक्ट खोलें (या उसे बनाएं: प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → नया डेमो प्रोजेक्ट → CubeSat (गाइडेड सिस्टम्स इंजीनियरिंग))।
  2. रेल के नीचे आरेख पर क्लिक करें, फिर + नया आरेख। Asset आरेख चुनें, इसका आरेख में EPS टाइप करें, 1.3 EPS चुनें और बनाएं पर क्लिक करें। हर भाग कौन-सा फ़ंक्शन करता है, यह देखने के लिए परफ़ॉर्म किए गए Actions चालू करें।
  3. + Asset ▾ → नया चाइल्ड Asset… चुनें और Battery Heater बनाएं। आरेख टूलबार में ⋯ (और कार्रवाइयां) पर क्लिक करें, फिर + Conduit: Battery Pack से Battery Heater तक, नाम Heater Power Line। फिर व्यवस्थित करें ▾ → लेआउट व्यवस्थित करें चुनें।
  4. डेटाबेस खोलें और Battery Heater और Heater Power Line को नई पंक्तियों के रूप में खोजें।
  5. आरेख के टैब पर वापस, प्रकार चयनकर्ता से प्रकार को पदानुक्रम आरेख में बदलें।
  6. 3.2 Battery Capacity का एक स्पाइडर आरेख बनाएं और स्तर 2 पर रहने दें।

आपका काम तब पूरा है जब 3.2 का स्पाइडर आरेख उसे संतुष्ट करने वाला Battery Pack और उसे सत्यापित करने वाला TC-07 Battery Capacity Test दिखाता है।

स्वयं जांचें

  1. आप कुछ हटाते नहीं, पर आरेख पर किसी भाग का नाम बदलते हैं। नया नाम और कहाँ दिखता है?
  2. 1.3 EPS का नया Asset आरेख पहले से तीन भाग क्यों दिखाता है?
  3. स्पाइडर आरेख कब Asset आरेख से अधिक उपयोगी होता है?
उत्तर दिखाएं
  1. आप कुछ हटाते नहीं, पर आरेख पर किसी भाग का नाम बदलते हैं। नया नाम और कहाँ दिखता है?

    हर जगह जहाँ आइटम दिखता है: डेटाबेस, दस्तावेज़, अन्य आरेख और इंस्पेक्टर। आरेख मॉडल का एक व्यू है, अलग चित्र नहीं।

  2. 1.3 EPS का नया Asset आरेख पहले से तीन भाग क्यों दिखाता है?

    आरेख मॉडल में पहले से मौजूद decomposed by संबंध पढ़ता है, इसलिए भाग बिना किसी मैन्युअल प्लेसमेंट के बन जाते हैं।

  3. स्पाइडर आरेख कब Asset आरेख से अधिक उपयोगी होता है?

    जब आप किसी एक आइटम के आसपास का ट्रेस विभिन्न संबंध प्रकारों में देखना चाहते हों: ज़रूरत, फ़ंक्शन, भाग और टेस्ट, उदाहरण के लिए किसी बदलाव के प्रभाव का आकलन करने के लिए।

और पढ़ें

ट्रांसक्रिप्ट

ट्रांसक्रिप्ट दिखाएं (नरेशन और स्क्रीन पर क्या है)

Introduction

Chapter four: your first diagram. In Holarch a diagram is a view of the model. It draws items and relationships that already exist, and whatever you add on a diagram goes into the model.

We continue with the Bike-Share Dock, whose parts and functions we related in the last chapter.

Create a diagram

Open Diagrams at the bottom of the rail. It lists every diagram in the project. None is saved yet, but Holarch already offers derived views of the dock, because the dock has parts.

On screen: Diagrams page: derived views only.

Click New Diagram, and pick the type. An Asset Diagram shows a system and its parts.

On screen: + New Diagram → Asset Diagram.

Then choose the root, the item the diagram is about. Type the first letters of Bike-Share Dock, pick it, and click Create.

On screen: Root: S.0 Bike-Share Dock → Create.

Holarch draws the dock with the three parts you related in the last chapter. Nothing was drawn by hand: the diagram reads the decomposed by relationships.

On screen: The asset diagram.

Check Performed Actions, and each part lists the functions it performs. That is the allocation from the last chapter, now on the picture.

On screen: Performed Actions.

Add to the model on the diagram

The back office service is outside the dock, but the kiosk talks to it. Click Asset, choose Existing Asset Outside the Root, and pick Back Office Service. It appears outside the dock's border.

On screen: + Asset ▾ → Existing Asset Outside the Root… → S.4.

A conduit is a physical or data link between assets. Click Conduit, connect the kiosk to the back office service, name the link Cellular Data Link, and click Create.

On screen: + Conduit → Kiosk → Back Office Service → Cellular Data Link.

The Arrange menu tidies the picture. Click Arrange, then Tidy Layout.

On screen: Arrange ▾ → Tidy Layout.

New parts can be added on the diagram too. Click Asset, choose New Child Asset, and create the dock's power supply.

On screen: + Asset ▾ → New Child Asset… → S.5 Power Supply.

Connect it to the charging unit with a second conduit, the Power Cable, and lay the diagram out again.

On screen: + Conduit → Power Supply → Charging Unit → Power Cable; Tidy Layout.

One model, many views

Now select the kiosk. The inspector shows the same item you created in the Database. Rename it Rental Kiosk.

On screen: Select Kiosk → inspector → Rental Kiosk.

Open the Database. The kiosk is renamed there too, and the power supply and both conduits are new rows. There is only one model, and the diagram is one view of it.

On screen: Database: Rental Kiosk, Power Supply, conduits.

The same items can be drawn in other ways. Go back to the diagram's tab, and switch its type at the top to Hierarchy Diagram: the dock's breakdown as a tree.

On screen: Back to the diagram → type: Hierarchy Diagram.

A spider diagram follows the links outward from one item. On the Diagrams page, click New Diagram, choose Spider Diagram, and make the requirement Unlock a Bike its root.

On screen: Diagrams → + New Diagram → Spider → root 1.1.

Set the level to two. It shows the requirement, the need it traces to, the function that satisfies it, and the part that performs that function: the traceability you built, on one page.

On screen: Level 2.

Every diagram can be exported with Export: as a picture, a Word document, a web page or a print, for a report or a review.

On screen: Export… dialog.

Recap

Let's recap. You created an asset diagram from the dock, saw its parts and functions drawn from the model, added an external system, a part and two conduits, renamed a part on the diagram, and viewed the same items as a hierarchy and a spider diagram.

Next, you write a requirements document whose requirements are items of this same model.