कोर्स के अध्याय
प्रशिक्षण · ट्रैक 3. व्यवहार और आर्किटेक्चर · 6 में से अध्याय 3.3
3.3 आवंटन 2:33
तय करें कि डॉक का कौन-सा भाग हर फ़ंक्शन करता है, और पता करें कि क्या बचा है।
Holarch 1.27 दिखाता है।
आप क्या सीखेंगे
- performed by संबंध के साथ एक्शन बनाम एसेट का ट्रेसेबिलिटी मैट्रिक्स सेट अप करें
- मैट्रिक्स में एक क्लिक से किसी फ़ंक्शन को उसे करने वाले एसेट को आवंटित करें
- उन एक्शन को खोजने के लिए केवल कमियां उपयोग करें जिन्हें कोई एसेट नहीं करता
- आइटम के ट्रेस अनुभाग में आवंटन की पुष्टि करें
Bike-Share Dock के फ़ंक्शन और Rent a Bike के चरणों को उन्हें करने वाले भागों को आवंटित करें, performed by संबंध के साथ एक्शन बनाम एसेट के मैट्रिक्स में, फिर केवल कमियां से वह सूची बनाएं जिसका अब भी कोई करने वाला नहीं है।
प्रोजेक्ट फ़ाइलें
- शुरुआती प्रोजेक्ट (.holarch.json; प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → प्रोजेक्ट आयात करें (.json)…)
- पूरा किया गया प्रोजेक्ट (.holarch.json; प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → प्रोजेक्ट आयात करें (.json)…)
वीडियो holarch.app से चलता है; गोपनीयता नीति देखें।
अभ्यास
इसे Holarch में CubeSat EO-1 डेमो प्रोजेक्ट पर स्वयं करें।
- अपना EO-1 डेमो प्रोजेक्ट खोलें, या उसे बनाएं: प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → नया डेमो प्रोजेक्ट → CubeSat (गाइडेड सिस्टम्स इंजीनियरिंग)।
- सत्यापन → ट्रेसेबिलिटी मैट्रिक्स खोलें। पंक्तियां चिप पर क्लिक करें, पंक्तियाँ यहाँ से को रूट एंटिटी के अंतर्गत पदानुक्रम पर सेट करें और रूट के रूप में OPS Run Nominal Imaging Pass चुनें, फिर हो गया पर क्लिक करें।
- कॉलम चिप पर क्लिक करें, कॉलम यहाँ से को क्लास Asset के साथ किसी क्लास की सभी एंटिटी पर सेट करें, और संबंध को performed by पर सेट करें।
- केवल कमियां पर टिक करें। OPS.9 Hold Data Onboard बचा रहता है, साथ में रूट OPS, जिसे सिस्टम समग्र रूप से करता है।
- उस सेल पर क्लिक करें जहाँ OPS.9 Hold Data Onboard और 1.4 C&DH मिलते हैं, वह भाग जो पेलोड डेटा को स्टोरेज में रखता है। फिर डेटाबेस में OPS.9 चुनें और उसके ट्रेस अनुभाग में performed by पढ़ें।
- जांचे गए चरण-दर-चरण अभ्यास के लिए ट्यूटोरियल 6 Physical Architecture and Allocation चलाएं (सहायता → ट्यूटोरियल)।
आपका काम तब पूरा है जब केवल कमियां में OPS.9 सूचीबद्ध नहीं होता और उसका ट्रेस अनुभाग performed by 1.4 C&DH दिखाता है।
स्वयं जांचें
- संबंध को सभी अनुमत के बजाय performed by पर क्यों सेट करें?
- आवंटन कहाँ संग्रहीत होता है?
- केवल कमियां एक पंक्ति दिखाता है। क्या वह हमेशा त्रुटि है?
उत्तर दिखाएं
संबंध को सभी अनुमत के बजाय performed by पर क्यों सेट करें?
एक प्रकार चुना होने पर, खाली सेल पर क्लिक ठीक वही संबंध बनाता है। सभी अनुमत प्रकारों के साथ, कई लागू होने पर Holarch को पूछना पड़ता है कि आपका आशय कौन-सा है।
आवंटन कहाँ संग्रहीत होता है?
आइटम पर: Action पर performed by के रूप में और Asset पर performs के रूप में। मैट्रिक्स केवल उन लिंक का एक व्यू है, इसलिए कोई भी अन्य व्यू, जैसे आइटम का ट्रेस अनुभाग, वही आवंटन दिखाता है।
केवल कमियां एक पंक्ति दिखाता है। क्या वह हमेशा त्रुटि है?
नहीं। कोई शीर्ष-स्तरीय ऑपरेशन या फ़ंक्शन सिस्टम द्वारा समग्र रूप से किया जा सकता है, इसलिए उसे किसी एक करने वाले की ज़रूरत नहीं होती। बाकी हर चरण को आमतौर पर एक की ज़रूरत होती है।
और पढ़ें
ट्रांसक्रिप्ट
ट्रांसक्रिप्ट दिखाएं (नरेशन और स्क्रीन पर क्या है)
Introduction
Welcome back. Functions say what the dock does. Its parts, the assets, say what it is. Allocation joins the two.
In this chapter you allocate every function to the part that performs it.
What allocation is
Each function should be performed by a part of the system. A function nothing performs will not happen, and a part with no function is weight with no job. In the model, allocation is one relationship: performed by.
On screen: Card: allocation.
Set up the matrix
A matrix is the quickest way to allocate many functions at once. Open Verification, then Traceability Matrix.
On screen: Verification → Traceability Matrix.
Click Rows, and choose all entities of the class Action. Set Columns to the class Asset the same way. Then set the relationship to performed by, so a click on a cell creates exactly that.
On screen: Rows → class Action; Columns → class Asset; Relationship: performed by.
Allocate the functions
The top-level functions first. Three were allocated in Getting Started, and the matrix marks them: Rent a Bike by the Rental Kiosk, Return a Bike by the Docking Bay, and Charge Bikes by the Charging Unit.
On screen: Existing marks: F.1, F.2, F.3.
Allocate the other two. Take Payment is performed by the Back Office Service: click the cell where its row and that column meet. Report Dock Status is performed by the kiosk, which talks to the back office.
On screen: F.4 × S.4, F.5 × S.2.
The steps of Rent a Bike from the last chapter need performers too. Identify Rider happens at the kiosk, Check Account in the back office, and Unlock Bay in the docking bay.
On screen: F.1.1 × S.2, F.1.2 × S.4, F.1.3 × S.1.
Find the gaps
Now turn on Gaps only. The matrix keeps only the rows and columns with no link: the steps still to allocate, and the top-level function, which is done by the dock as a whole.
On screen: Gaps only.
The rest follow the same way. Show Bay Number and Start Rental belong to the kiosk and the back office, and Relock Bay to the docking bay.
On screen: F.1.4 × S.2, F.1.6 × S.4, F.1.7 × S.1.
On the item
Allocation is stored on the items, not in the matrix. Select Rent a Bike in the Database, and open its Trace section: performed by lists the Rental Kiosk.
On screen: Database → F.1 → Trace.
Recap
Let's recap. You set up a matrix of actions against assets with performed by, allocated the functions and the steps with one click each, and used Gaps only to find what was left.
Next, you define how the dock's parts connect: interfaces.