Holarch
कोर्स के अध्याय

प्रशिक्षण · ट्रैक 6. Holarch पर माइग्रेट करना · 5 में से अध्याय 6.1

6.1 माइग्रेशन की योजना बनाना 3:00

आयात करने से पहले तय करें कि हर प्रकार का डेटा मॉडल में कहाँ जाएगा।

Holarch 2.21 दिखाता है।

सभी अध्याय · 6.2 Excel और CSV से आवश्यकताएं →

आप क्या सीखेंगे

  • हर प्रकार के स्रोत डेटा को किसी क्लास, लेबल, एट्रिब्यूट या संबंध पर मैप करें
  • किसी प्रोजेक्ट के स्कीमा में वे एट्रिब्यूट और लेबल जांचें जिनकी आयात को ज़रूरत है
  • किसी ऐसे स्रोत फ़ील्ड के लिए एट्रिब्यूट जोड़ें जिसकी स्कीमा में कोई जगह नहीं है
  • आयात और निर्यात पेज खोजें और उसके चार चरणों के नाम बताएं

Holarch पर जाने की योजना बनाएं: उदाहरण Plant Inspection Drone और उसकी टीम द्वारा लाई गई फ़ाइलें, डेटा LML क्लास, लेबल, एट्रिब्यूट और संबंधों पर कैसे मैप होता है, प्रोजेक्ट का स्कीमा कहाँ दिखाता है कि क्या उपलब्ध है, और हर आयात क्या करता है।

प्रोजेक्ट फ़ाइलें

वीडियो holarch.app से चलता है; गोपनीयता नीति देखें।

अभ्यास

इसे Holarch में CubeSat EO-1 डेमो प्रोजेक्ट पर स्वयं करें।

  1. अपना EO-1 डेमो प्रोजेक्ट खोलें (यदि आपके पास नहीं है, तो उसे बनाएं: प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → नया डेमो प्रोजेक्ट → CubeSat (गाइडेड सिस्टम्स इंजीनियरिंग))।
  2. रेल में सेटिंग्स → स्कीमा खोलें, क्लास के अंतर्गत Requirement पर क्लिक करें, और वे एट्रिब्यूट सूचीबद्ध करें जिन्हें आवश्यकता स्प्रेडशीट भर सकती है (उदाहरण के लिए Priority, Owner, Verification Method)।
  3. स्कीमा का लेबल पेज खोलें और पता करें कि Performance Requirement जैसे प्रकार कहाँ रखे जाते हैं।
  4. मान लें कि किसी आपूर्तिकर्ता के ट्रैकर में Supplier Ref कॉलम है जिसकी कोई जगह नहीं है: Requirement पर + एट्रिब्यूट पर क्लिक करें, उसका नाम Supplier Ref रखें, टेक्स्ट प्रकार चुनें, और एट्रिब्यूट जोड़ें पर क्लिक करें।
  5. ज़रूरतें और आवश्यकताएं → आयात और निर्यात खोलें और पढ़ें कि ड्रॉप ज़ोन कौन-से फ़ॉर्मेट लेता है और निर्यात करें कार्ड क्या देता है।

आपका काम तब पूरा है जब Supplier Ref, Requirement की एट्रिब्यूट सूची में अंतिम है और आप बता सकते हैं कि किसी सामान्य ट्रैकर का हर कॉलम कहाँ जाएगा।

स्वयं जांचें

  1. आयात करने से पहले यह क्यों तय करें कि हर प्रकार का डेटा कहाँ जाएगा?
  2. किसी कॉलम का कोई मेल खाता एट्रिब्यूट नहीं है। आपके विकल्प क्या हैं?
  3. कोई आयात गलत हो गया। आप उसे वापस कैसे लेते हैं?
  4. आप आयात पेज के बजाय प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट आयात करें (.json)… कब उपयोग करते हैं?
उत्तर दिखाएं
  1. आयात करने से पहले यह क्यों तय करें कि हर प्रकार का डेटा कहाँ जाएगा?

    जो डेटा सही क्लास, लेबल, एट्रिब्यूट और संबंधों में पहुंचता है, वह ट्रेसिंग, गुणवत्ता जांच और रिपोर्ट में तुरंत काम करता है। आयात के बाद उसे ठीक करने का मतलब है बहुत से आइटम हाथ से संपादित करना।

  2. किसी कॉलम का कोई मेल खाता एट्रिब्यूट नहीं है। आपके विकल्प क्या हैं?

    आयात से पहले सेटिंग्स → स्कीमा में एट्रिब्यूट जोड़ें, या मैप चरण में कॉलम को नया एट्रिब्यूट (स्कीमा में जोड़ा गया) पर मैप करें।

  3. कोई आयात गलत हो गया। आप उसे वापस कैसे लेते हैं?

    एक बार ⌘Z / Ctrl+Z दबाएं: आयात पेज से किया गया आयात एक ही undo चरण है।

  4. आप आयात पेज के बजाय प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट आयात करें (.json)… कब उपयोग करते हैं?

    पूरे प्रोजेक्ट को एक नए, अलग प्रोजेक्ट के रूप में पुनर्स्थापित करने के लिए। आयात पेज किसी फ़ाइल के आइटम को खुले प्रोजेक्ट में मिला देता है।

और पढ़ें

ट्रांसक्रिप्ट

ट्रांसक्रिप्ट दिखाएं (नरेशन और स्क्रीन पर क्या है)

Introduction

Welcome to Migrating to Holarch. Most teams arrive with their data in other places: requirements in spreadsheets and Word documents, specifications from suppliers, and models in other tools. This track shows how each one comes in, and what to check afterwards.

This first chapter is about planning. A little thought about where each kind of data belongs saves a lot of clean-up later.

The example

Our example is the Plant Inspection Drone, a drone system that inspects tanks and pipe racks inside a process plant. Its team brings four files.

On screen: The example card.

Map your data

Before importing, decide where each kind of data goes. Rows of a requirements list become Requirements. Section headings become Statements that hold them. Parts and systems become Assets, and functions become Actions.

On screen: Mapping card: classes.

Types such as functional or performance become labels. Fields such as status or rationale become attributes. And links such as satisfies, verified by or refines become relationships, so they can be traced later.

On screen: Mapping card: labels, attributes, relationships.

Check the schema

Create the project first. In Manage Projects, click New Project, name it Plant Inspection Drone, and click Create Project.

On screen: + New Project → Plant Inspection Drone → Create Project.

The project's schema lists every class with its attributes and labels. Open Settings at the bottom of the rail, then Schema.

On screen: Settings → Schema.

Select Requirement. Its attributes include the status, with the values Draft, In Review, Approved and Rejected. The usual kinds of requirement, such as Functional and Performance, are under Labels. If your data has a field with no home here, an owner can add an attribute or a label before the import.

On screen: Schema → Requirement → its attributes; then Labels.

One import page

All imports start on one page: Needs and Requirements, then Import and Export. Drop any file here: Word, Holarch project files, Excel and CSV, plain text, UML and SysML models, or ReqIF. Holarch detects the format from the file.

On screen: Needs & Requirements → Import and Export: the drop zone.

Each import takes four steps: File, Map, Review and Import. It gives the items new identities in your project, and the whole import is a single undo step, so you can try it and take it back. Content from files is cleaned of anything unsafe on the way in.

On screen: The Import steps.

Recap

Let's recap. You met the Plant Inspection Drone and its files, mapped their data to classes, labels, attributes and relationships, checked the schema, and found the Import and Export page.

Next, the requirements tracker comes in from Excel.