Holarch
कोर्स के अध्याय

प्रशिक्षण · ट्रैक 7. प्रक्रिया का पालन · 4 में से अध्याय 7.3

7.3 चरण और गेट 1:52

गेट समीक्षा से किसी चरण को बंद करें और अगले पर जाएं।

Holarch 1.6 दिखाता है।

आप क्या सीखेंगे

  • किसी चरण के लिए गेट माइलस्टोन जोड़ें और उसकी तारीख सेट करें
  • चरण के दस्तावेज़ों के साथ एक समीक्षा पैकेज बनाएं
  • वर्तमान चरण बदले बिना बाद के किसी चरण की जांचें देखें
  • गेट समीक्षा के बाद अगले चरण को वर्तमान बनाएं

Kossiakoff गाइड का ज़रूरत विश्लेषण चरण बंद करें: एक गेट माइलस्टोन जोड़ें, एक समीक्षा पैकेज बनाएं जो चरण के दस्तावेज़ एकत्र करता है, उसे खोलें, प्रोजेक्ट को आगे बढ़ाए बिना अगले चरण पर नज़र डालें, और अवधारणा अन्वेषण को वर्तमान चरण बनाएं।

प्रोजेक्ट फ़ाइलें

वीडियो holarch.app से चलता है; गोपनीयता नीति देखें।

अभ्यास

इसे Holarch में CubeSat EO-1 डेमो प्रोजेक्ट पर स्वयं करें।

  1. अपना EO-1 डेमो प्रोजेक्ट खोलें (यदि आपके पास नहीं है, तो उसे बनाएं: प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → नया डेमो प्रोजेक्ट → CubeSat (गाइडेड सिस्टम्स इंजीनियरिंग))। Kossiakoff SE पद्धति के साथ प्लान → SE प्रक्रिया खोलें, ज़रूरत विश्लेषण चरण पर।
  2. नीचे, चरण गेट के अंतर्गत गेट माइलस्टोन जोड़ें पर क्लिक करें। माइलस्टोन खोलें और उसकी तारीख आज से दो सप्ताह बाद की सेट करें।
  3. समीक्षा पैकेज बनाएं पर क्लिक करें, पैकेज खोलें, और उसमें EO-1 System Requirements Specification जोड़ें।
  4. जीवन चक्र में अवधारणा अन्वेषण पर क्लिक करें और उसकी जांचें पढ़ें: आवश्यकताएं, ट्रेस की गई ज़रूरतें, गुणवत्ता जांच और ट्रेड स्टडी।
  5. वर्तमान चरण बनाएं पर क्लिक करें।

आपका काम तब पूरा है जब अवधारणा अन्वेषण वर्तमान के रूप में चिह्नित है और ज़रूरत विश्लेषण गेट अपने माइलस्टोन और समीक्षा पैकेज से लिंक होता है।

स्वयं जांचें

  1. समीक्षा पैकेज बनाने के बाद आपने एक नया दस्तावेज़ लिखा। क्या वह पैकेज में है?
  2. किसी चरण पर क्लिक करने और वर्तमान चरण बनाएं में क्या अंतर है?
  3. गेट माइलस्टोन कहाँ दिखता है?
उत्तर दिखाएं
  1. समीक्षा पैकेज बनाने के बाद आपने एक नया दस्तावेज़ लिखा। क्या वह पैकेज में है?

    नहीं। पैकेज में वे दस्तावेज़ शामिल होते हैं जो उसके बनाए जाने के समय मौजूद हैं। बाद के दस्तावेज़ पैकेज में स्वयं जोड़ें।

  2. किसी चरण पर क्लिक करने और वर्तमान चरण बनाएं में क्या अंतर है?

    किसी चरण पर क्लिक करने से केवल उसकी जांचें दिखती हैं। वर्तमान चरण बनाएं यह बदलता है कि प्रोजेक्ट कहाँ है, उस पर काम करने वाले सभी के लिए।

  3. गेट माइलस्टोन कहाँ दिखता है?

    यह Milestone लेबल वाला एक Time आइटम है। तारीख मिलने के बाद यह प्रोजेक्ट प्रबंधन कैलेंडर पर और आगामी इवेंट के अंतर्गत दिखता है।

और पढ़ें

ट्रांसक्रिप्ट

ट्रांसक्रिप्ट दिखाएं (नरेशन और स्क्रीन पर क्या है)

Introduction

Chapter three: phases and gates. Each phase ends with a gate, a review that decides whether the project is ready to move on.

We finish the needs analysis phase of the Bike-Share Dock with a gate, and move on to concept exploration.

The phase gate

Open SE Process, and scroll to the bottom of the page. The phase gate is a reminder to hold a review at the end of needs analysis before moving on.

On screen: SE Process → Phase gate.

Click Add Gate Milestone. Holarch adds a milestone for the review to the model, and links it here.

On screen: Add Gate Milestone.

Then click Create Review Package. A review package is a compilation of the documents this phase produces. It picks up the concept of operations from the last chapter.

On screen: Create Review Package.

The review package

Click the package to open it. Everything the reviewers need is in one place, in the order you choose.

On screen: Open the review package.

The next phase

Go back to SE Process. To see what the next phase asks for, click concept exploration in the life cycle. You are only looking at it: the needs analysis phase is still current.

On screen: SE Process → click Concept exploration.

Concept exploration turns the needs into system requirements and compares candidate concepts. Its checks show what the model already has, such as the requirements written in Track 1, and what is still to do.

On screen: Concept exploration checks.

When the gate review has passed, click Make Current Phase. Concept exploration becomes the current phase of the project, for everyone working on it.

On screen: Make Current Phase.

Recap

Let's recap. You found the phase gate, added a gate milestone, created a review package with the phase's documents, looked ahead at the next phase, and made it current.

Next, you prepare a technical review from the model.