कोर्स के अध्याय
प्रशिक्षण · ट्रैक 13. व्हाइटबोर्ड · 4 में से अध्याय 13.4
13.4 लाइव डेटा, मॉडल आइटम और क्लिपआर्ट 3:17
सेल को लाइव तालिका के रूप में चिपकाएं, किसी चार्ट को स्प्रेडशीट सेल से लिंक करें, आकृतियों को मॉडल आइटम से लिंक करें और उनमें बदलें, और क्लिपआर्ट जोड़ें।
Holarch 2.35 दिखाता है।
आप क्या सीखेंगे
- Excel से सेल को लाइव स्प्रेडशीट तालिका के रूप में चिपकाएं
- डेटा चुनें में किसी चार्ट को स्प्रेडशीट रेंज से लिंक करें
- स्प्रेडशीट में एक मान बदलें और देखें कि बोर्ड उसका अनुसरण करता है
- किसी आकृति को मॉडल आइटम से लिंक करें, और किसी आकृति को नए आइटम में बदलें
- क्लिपआर्ट खोजें, स्टार करें और डालें
Bike-Share Dock अवधारणा व्हाइटबोर्ड पूरा करें: Excel से डॉक स्थिति के सेल को लाइव स्प्रेडशीट तालिका के रूप में चिपकाएं, डेटा चुनें से एक बार चार्ट को उन्हीं सेल से लिंक करें, स्प्रेडशीट में एक आंकड़ा बदलें और देखें कि तालिका और चार्ट उसका अनुसरण करते हैं, किसी आकृति को मॉडल के एक asset से लिंक करें और दूसरी आकृति को नए asset में बदलें, और क्लिपआर्ट पैनल से एक चित्र जोड़ें।
प्रोजेक्ट फ़ाइलें
- शुरुआती प्रोजेक्ट (.holarch.json; प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → प्रोजेक्ट आयात करें (.json)…)
- पूरा किया गया प्रोजेक्ट (.holarch.json; प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → प्रोजेक्ट आयात करें (.json)…)
वीडियो holarch.app से चलता है; गोपनीयता नीति देखें।
अभ्यास
इसे Holarch में Bike-Share Dock पर स्वयं करें।
- अध्याय की शुरुआती फ़ाइल और Dock Concept व्हाइटबोर्ड खोलें। बोर्ड पट्टी में + पर क्लिक करें।
- Excel में हेडर पंक्ति वाले सेल का एक छोटा ब्लॉक कॉपी करें। बोर्ड पर क्लिक करें, ⌘V / Ctrl+V (या Ctrl+V) दबाएं, लाइव स्प्रेडशीट चुनें और पेस्ट करें पर क्लिक करें।
- एक बार चार्ट डालें, डेटा चुनें… → स्प्रेडशीट रेंज से लिंक करें… खोलें, नई स्प्रेडशीट चुनें, रेंज टाइप करें और लिंक करें पर क्लिक करें, फिर ठीक है।
- तालिका पर डबल-क्लिक करें, स्प्रेडशीट में एक संख्या बदलें और उसके एडिटर टैब से बोर्ड पर वापस जाएं।
- Board 1 पर Rental Kiosk आकृति चुनें, इससे लिंक करें… पर क्लिक करें और Rental Kiosk asset चुनें। Rider चुनें, मॉडल में बदलें… पर क्लिक करें, Asset चुनें और बदलें पर क्लिक करें।
- क्लिपआर्ट खोलें,
bicycleखोजें, किसी एक चित्र को स्टार करें और उसे डालने के लिए उस पर क्लिक करें।
आपका काम तब पूरा है जब तालिका और चार्ट वह संख्या दिखाते हैं जो आपने बदली, दोनों आकृतियों पर क्लास बैज है, और बोर्ड पर एक साइकिल का चित्र है।
स्वयं जांचें
- सेल को चार्ट के रूप में और लाइव स्प्रेडशीट के रूप में चिपकाने में क्या अंतर है?
- चार्ट स्प्रेडशीट सेल का अनुसरण कैसे करता है?
- इससे लिंक करें… और मॉडल में बदलें… में क्या अंतर है?
उत्तर दिखाएं
सेल को चार्ट के रूप में और लाइव स्प्रेडशीट के रूप में चिपकाने में क्या अंतर है?
चार्ट मानों की एक कॉपी रखता है और नहीं बदलता। लाइव स्प्रेडशीट सेल के साथ एक स्प्रेडशीट बनाती है और उन्हें एक लाइव तालिका के रूप में दिखाती है जो उनके साथ बदलती है।
चार्ट स्प्रेडशीट सेल का अनुसरण कैसे करता है?
डेटा चुनें में स्प्रेडशीट रेंज से लिंक करें… से उसे लिंक करें; फिर चार्ट उसी रेंज से बनता है।
इससे लिंक करें… और मॉडल में बदलें… में क्या अंतर है?
इससे लिंक करें… आकृति को पहले से मौजूद किसी आइटम से जोड़ता है। मॉडल में बदलें… आकृति से एक नया आइटम बनाता है, उसके टेक्स्ट के नाम पर, और उसे लिंक करता है।
और पढ़ें
ट्रांसक्रिप्ट
ट्रांसक्रिप्ट दिखाएं (नरेशन और स्क्रीन पर क्या है)
Introduction
Chapter four: live data, model items and clipart. A board can show figures that stay current, stand for items of the model, and use ready-made pictures.
In this chapter you finish the dock concept board.
Live data from pasted cells
Live data gets a board of its own. Click the plus in the Boards strip.
On screen: Boards strip → +.
The dock status is kept in a workbook: each station's docks, and the bikes available now. In Excel, select the cells and copy them.
On screen: Dock Status.xlsx.
Click the board, and press Command V, or Control V. Holarch asks how to paste the cells. Choose Live spreadsheet, and click Paste.
On screen: Click the board → ⌘V / Ctrl+V → Live spreadsheet → Paste.
Holarch creates a spreadsheet that holds the cells, and shows them on the board as a live table. Drag the table to the left.
On screen: The live table → drag it left.
A chart can follow the same cells. In the Tables and Charts panel, click Bar, and drag the chart beside the table.
On screen: Tables and Charts → Bar → drag it right.
Open Select Data, and click Link to Spreadsheet Range. Choose the new spreadsheet, type A1 to C5 as the range, and click Link.
On screen: Select Data… → Link to Spreadsheet Range… → A1:C5 → Link.
Select Data now names the linked range, and the chart shows the stations' docks and bikes. Click OK.
On screen: Linked range → OK.
The board follows the source
Now change a figure at its source. Double-click the table: its spreadsheet opens, with the cells selected.
On screen: Double-click the table → the spreadsheet.
Two more bikes are back at Riverside. In the Name Box, type C3 and press Enter, then type 6 in the formula bar, and press Enter.
On screen: Name Box C3 → formula bar 6 → Enter.
Go back to the board with its editor tab. The table and the chart already show six bikes at Riverside.
On screen: Editor tab → the board; the new value.
Model items on the board
Shapes on a board can stand for items of the model. Open Board 1, and select the rental kiosk.
On screen: Board 1 → select Rental Kiosk.
In the inspector's Model section, click Link to, search for Rental Kiosk, and choose the asset.
On screen: Link to… → Rental Kiosk (Asset).
The shape shows a badge, and the inspector names the linked asset. Click its name to see the asset's details in the side panel.
On screen: Badge; Model section → the asset.
A shape can also become a new item. Select the rider, and click Convert to Model. Choose Asset as the class, keep the name, and click Convert.
On screen: Rider → Convert to Model… → Asset → Convert.
The rider is now an asset of the model, linked to its shape, and listed in the Database with the other assets.
On screen: The linked Rider.
Clipart
Last, the Clipart panel: thousands of pictures and icons for concept graphics. Open it, and search for bicycle.
On screen: Clipart panel → search bicycle.
The star on a picture adds it to your favorites. Click a picture to add it to the board, and drag it below the rider.
On screen: Star → click the picture → drag it beside the rider.
Recap
To recap: paste cells as a live table, link charts to spreadsheet ranges in Select Data, link or convert shapes in the Model section, and add pictures from the Clipart panel.
That completes the whiteboard track. You can now sketch a concept with shapes and lines, chart its figures, keep them live, and tie the board to the model.
On screen: Track complete card, then end card.