Holarch
कोर्स के अध्याय

प्रशिक्षण · ट्रैक 13. व्हाइटबोर्ड · 4 में से अध्याय 13.2

13.2 वक्र और रेखा लेबल 3:09

घुमावदार रेखा को उसके शिखर से आकार दें, उसके सिरों को आकृतियों से समकोण पर रखें, और लेबल रखें, घुमाएं और हटाएं।

Holarch 2.35 दिखाता है।

← 13.1 आकृतियां और रेखाएं · सभी अध्याय · 13.3 चार्ट →

आप क्या सीखेंगे

  • एक घुमावदार रेखा बनाएं और पीले हीरे से उसका शिखर रखें, उसे बीच में स्नैप करते हुए
  • किसी वक्र को अधिक मोड़ें या सीधा करें, और रेखा पैनल में वक्र और शिखर की स्थिति सेट करें
  • किसी रेखा के सिरों को उसकी आकृतियों के किनारों से समकोण पर रखें
  • रेखा लेबल जोड़ें, खिसकाएं, घुमाएं और हटाएं

Bike-Share Dock अवधारणा बोर्ड पर रेखाओं को आकार दें: एक घुमावदार तीर बनाएं, पीले हीरे से वक्र के शिखर को रेखा के साथ खिसकाएं (यह बीच में स्नैप होता है), उसे अधिक या कम मोड़ें, रेखा पैनल में वक्र और शिखर की स्थिति सेट करें, सिरों को उन किनारों से समकोण पर रखें जिनसे वे मिलते हैं ताकि वक्र हर आकृति से समकोण पर निकले, फिर रेखा लेबल जोड़ें, उन्हें रेखा के साथ और रेखा से दूर खिसकाएं, स्नैपिंग के साथ घुमाएं, उन्हें रेखा का अनुसरण कराएं और हटाएं।

प्रोजेक्ट फ़ाइलें

वीडियो holarch.app से चलता है; गोपनीयता नीति देखें।

अभ्यास

इसे Holarch में Bike-Share Dock पर स्वयं करें।

  1. अध्याय की शुरुआती फ़ाइल और Dock Concept व्हाइटबोर्ड खोलें।
  2. A दबाएं, रेखा विकल्प बार में घुमावदार चुनें और राइडर से डॉकिंग बे तक खींचें।
  3. पीले हीरे को एक सिरे की ओर खींचें, फिर वापस तब तक खींचें जब तक वह बीच में स्नैप न हो जाए। Shift दबाए रखते हुए उसे रेखा से दूर खींचें।
  4. इंस्पेक्टर के रेखा अनुभाग में शुरुआत और अंत के लिए किनारे से समकोण पर टिक करें, फिर राइडर को खिसकाएं।
  5. रेखा पर डबल-क्लिक करें, returns a bike टाइप करें और प्रविष्टि दबाएं। लेबल को रेखा के साथ, उससे दूर, और वापस उस पर खींचें; उसके गोल नॉब से उसे घुमाएं।
  6. एक दूसरा लेबल जोड़ें और उसके × से उसे हटाएं।

आपका काम तब पूरा है जब घुमावदार तीर दोनों आकृतियों से उनके किनारों पर समकोण पर मिलता है और रेखा का अनुसरण करने वाला एक लेबल रखता है।

स्वयं जांचें

  1. घुमावदार रेखा पर पीला हीरा क्या दिखाता है?
  2. बीच में स्नैप हुए बिना शिखर को कहीं भी कैसे रखें?
  3. रेखा के खिसकने पर कौन सी चीज़ लेबल को उसकी रेखा के साथ मुड़ा हुआ रखती है?
उत्तर दिखाएं
  1. घुमावदार रेखा पर पीला हीरा क्या दिखाता है?

    शिखर: वक्र का वह बिंदु जो उसके सिरों के बीच की सीधी रेखा से सबसे दूर है। उसे रेखा के साथ खींचने से शिखर खिसकता है; उसे दूर खींचने से वक्र अधिक मुड़ता है।

  2. बीच में स्नैप हुए बिना शिखर को कहीं भी कैसे रखें?

    हीरे को खींचते समय Command (Mac) या Control दबाए रखें।

  3. रेखा के खिसकने पर कौन सी चीज़ लेबल को उसकी रेखा के साथ मुड़ा हुआ रखती है?

    रेखा पैनल में लेबल की पंक्ति में, लाइन का अनुसरण करें।

और पढ़ें

ट्रांसक्रिप्ट

ट्रांसक्रिप्ट दिखाएं (नरेशन और स्क्रीन पर क्या है)

Introduction

Chapter two: curves and line labels. A curved line is often the clearest way to show a flow that loops around other shapes, and a label says what the line means.

In this chapter you draw a curved arrow, shape it, and label it.

A curved line

The rider returns the bike at a docking bay. Press the A key, choose Curved in the Line options bar, and drag from the rider to the docking bay.

On screen: A → Curved → drag Rider → Docking Bay.

The new line is selected. The yellow diamond sits on the peak of the curve: the point farthest from a straight line between its ends.

On screen: The curve handle on the peak.

The peak

Drag the diamond along the line toward the docking bay. The peak moves toward that end, and the curve stays one smooth arc.

On screen: Drag the peak toward the docking bay.

Drag it back. Near the middle, it snaps to the center, and a guide shows it. Hold Command, or Control, while you drag to place it anywhere.

On screen: Drag the peak back; it snaps to the middle.

Drag the diamond away from the line to bend the curve more, or toward it to flatten it. With Shift held, only the bend changes.

On screen: Drag the peak outward.

The Line panel shows the same as numbers: Curve for the bend, and Peak position, from five to ninety-five percent along the line. Center puts the peak back in the middle.

On screen: Line panel: Curve, Peak position, Center.

Square ends

Under Ends, tick End in Square to the edge. The curve now meets the docking bay at a right angle to its edge, and eases into its arc. Tick Start too, for the rider.

On screen: Ends → Square to the edge: End, Start.

The setting stays while the shapes move. Drag the rider: both ends stay square.

On screen: Drag Rider.

Line labels

Now a label. Double-click the line, type returns a bike, and press Enter.

On screen: Double-click the curve → returns a bike → Enter.

Click the label to select it. Drag it along the line: it keeps its place along the line when the line moves.

On screen: Drag the label along the line.

Drag it away from the line, and a thin leader line connects it. Bring it back within a few pixels, and it snaps onto the line again.

On screen: Drag the label off the line, then back.

A selected label shows a round knob. Drag it to rotate the label. It snaps to horizontal, to the line's direction and to fifteen-degree steps.

On screen: Drag the rotate knob to the line's direction.

In the Line panel, each label has its position, offsets and rotation, and Follow the line, which keeps it turned along the line wherever the line goes.

On screen: Line panel → Labels.

A line can have several labels. Double-click near the rider for a second one, type paid by app, and press Enter.

On screen: Double-click the line → paid by app.

To delete a label, click its cross, press Delete while it is selected, or right-click it and choose Delete Label. Delete the second one.

On screen: The label's ×.

Recap

To recap: drag the yellow diamond to place the peak, which snaps to the middle; square the ends in the Line panel; and double-click a line to label it, then move, rotate or delete the label.

In the next chapter, you add charts to the board.