कोर्स के अध्याय
प्रशिक्षण · ट्रैक 4. दस्तावेज़ और डिलीवरेबल · 5 में से अध्याय 4.1
4.1 दस्तावेज़ टेम्पलेट 2:54
हर अनुभाग के मार्गदर्शन के साथ, किसी टेम्पलेट से योजना या विनिर्देश शुरू करें।
Holarch 2.13 दिखाता है।
आप क्या सीखेंगे
- किसी अंतर्निहित टेम्पलेट से चुने गए प्रकार का दस्तावेज़ बनाएं
- लेखन मार्गदर्शन शामिल करें और किसी अनुभाग में मार्गदर्शन पढ़ें
- किसी अनुभाग के मार्गदर्शन को अपने टेक्स्ट से बदलें और सहेजें
- समझाएं कि हर दस्तावेज़ अनुभाग एक मॉडल आइटम क्यों है
किसी अंतर्निहित टेम्पलेट से Bike-Share Dock की सिस्टम्स इंजीनियरिंग प्रबंधन योजना बनाएं: दस्तावेज़ प्रकार चुनें, रूपरेखा और निर्देशित टेम्पलेट की तुलना करें, हर अनुभाग में मार्गदर्शन पढ़ें, उसे अपने टेक्स्ट से बदलें, और देखें कि हर अनुभाग एक मॉडल आइटम है।
प्रोजेक्ट फ़ाइलें
- शुरुआती प्रोजेक्ट (.holarch.json; प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → प्रोजेक्ट आयात करें (.json)…)
- पूरा किया गया प्रोजेक्ट (.holarch.json; प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → प्रोजेक्ट आयात करें (.json)…)
वीडियो holarch.app से चलता है; गोपनीयता नीति देखें।
अभ्यास
इसे Holarch में CubeSat EO-1 डेमो प्रोजेक्ट पर स्वयं करें।
- अपना EO-1 डेमो प्रोजेक्ट खोलें, या उसे बनाएं: प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → नया डेमो प्रोजेक्ट → CubeSat (गाइडेड सिस्टम्स इंजीनियरिंग)।
- ज़रूरतें और आवश्यकताएं → दस्तावेज़ खोलें और + नया दस्तावेज़ पर क्लिक करें। उसका नाम
EO-1 Interface Control Documentरखें। - इसके लिए टेम्पलेट के अंतर्गत इंटरफ़ेस नियंत्रण दस्तावेज़ चुनें, लेखन मार्गदर्शन शामिल करें पर टिक करें, इंटरफ़ेस नियंत्रण दस्तावेज़ (ICD) कार्ड चुनें और बनाएं पर क्लिक करें।
- अनुभाग 2.3 Interface Owners and Change Authority चुनें और उसका मार्गदर्शन पढ़ें। उसके विवरण पर क्लिक करें, मार्गदर्शन को EO-1 इंटरफ़ेस के स्वामियों से बदलें (उदाहरण के लिए Payload Lead और Comms Lead), और सहेजने के लिए ⌘ / Ctrl↵ दबाएं।
- अनुभाग 3.2 Interface Matrix चुनें और वह लाइव इंटरफ़ेस मैट्रिक्स पढ़ें जो टेम्पलेट ने वहाँ रखा है।
- जांचे गए चरण-दर-चरण अभ्यास के लिए ट्यूटोरियल 11 Produce the Deliverable चलाएं (सहायता → ट्यूटोरियल)।
आपका काम तब पूरा है जब नया ICD 2.3 में मार्गदर्शन के बजाय आपका अपना टेक्स्ट दिखाता है, और 3.2 EO-1 घटकों का मैट्रिक्स दिखाता है।
स्वयं जांचें
- नया दस्तावेज़ पहले कौन-से टेम्पलेट दिखाता है, यह किससे तय होता है?
- लेखन मार्गदर्शन वाले और बिना मार्गदर्शन वाले टेम्पलेट में क्या अंतर है?
- हर अनुभाग का मॉडल आइटम होना क्यों मायने रखता है?
उत्तर दिखाएं
नया दस्तावेज़ पहले कौन-से टेम्पलेट दिखाता है, यह किससे तय होता है?
इसके लिए टेम्पलेट के अंतर्गत चुना गया दस्तावेज़ प्रकार। अन्य प्रकारों के टेम्पलेट अब भी अन्य टेम्पलेट के अंतर्गत सूचीबद्ध होते हैं; दस्तावेज़ को उसी टेम्पलेट का प्रकार मिलता है जिसे आप चुनते हैं।
लेखन मार्गदर्शन वाले और बिना मार्गदर्शन वाले टेम्पलेट में क्या अंतर है?
दोनों एक जैसे क्रमांकित अनुभाग और शुरुआती तालिकाएं देते हैं। मार्गदर्शन के साथ, हर अनुभाग इस छोटे मार्गदर्शन से भी शुरू होता है कि उसमें क्या होना चाहिए, जिसे आप लिखते समय बदल देते हैं।
हर अनुभाग का मॉडल आइटम होना क्यों मायने रखता है?
अनुभाग एक Statement है, इसलिए आप उसे किसी आवश्यकता की तरह लिंक कर सकते हैं, उस पर टिप्पणी कर सकते हैं और उसकी बेसलाइन बना सकते हैं, और दस्तावेज़ मॉडल का एक व्यू बना रहता है।
और पढ़ें
ट्रांसक्रिप्ट
ट्रांसक्रिप्ट दिखाएं (नरेशन और स्क्रीन पर क्या है)
Introduction
Welcome to track four: documents and deliverables. Programs are reviewed through their documents: plans, specifications, and the matrices reviewers ask for. In Holarch, these are built from the model. This first chapter covers document templates.
You will pick a document type and its template, compare an outline with a template that has guidance, and write your own text over that guidance.
Choose a type
We continue with the Bike-Share Dock. It already has requirements, functions, parts and test cases. Open Needs and Requirements, then Documents, and click New Document.
On screen: Needs & Requirements → Documents → + New Document.
The type decides which templates are offered. Holarch has templates for the documents most programs write, from the concept of operations to the test plan, and for the concept stage: needs analysis, concept exploration and concept definition.
On screen: Card: document types with templates.
Name it Bike-Share Dock SEMP. Then, under Templates for, choose Systems Engineering Management Plan Document.
On screen: Name, then Templates for ▾ → Systems Engineering Management Plan Document.
Outline or guidelines
Each template comes in two forms. The outline has only the section headings. With writing guidance, every section also explains what it should hold, with an example. Tick Include writing guidance, choose the template, and click Create.
On screen: Include writing guidance → the template card → Create.
The plan opens with fifteen numbered sections: the life cycle, the technical reviews, requirements management, baselines, interfaces, verification, risk, and the tools and model.
On screen: The new plan and its outline.
Write your plan
Click section 2.1, Purpose. Its text is the guidance: state why this plan exists and who uses it, followed by an example.
On screen: Outline → 2.1 Purpose.
Replace the guidance with your own text. Click the description to edit it, select its text, and type the purpose of this plan. Then press Command Return to save it.
On screen: Edit 2.1's description → type → Save.
The guidance often points to where the work lives in Holarch. Section 8.1, Baselines, says to use Holarch baselines, so that later changes can be compared against them. Chapter four of this track shows how.
On screen: Outline → 8.1 Baselines.
Every section is a model item, a statement, so you can link it, comment on it and baseline it, like a requirement.
On screen: 8.1's class badge: Statement.
Recap
Let's recap. You chose a document type and its template, picked the template with guidelines, read the guidance in a section, and replaced it with your own text.
Next, you put live traceability and verification matrices into a document.