कोर्स के अध्याय
प्रशिक्षण · ट्रैक 7. प्रक्रिया का पालन · 4 में से अध्याय 7.4
7.4 मॉडल से तकनीकी समीक्षा चलाना 2:38
किसी समीक्षा के प्रवेश मानदंड जांचें और उसका पैकेज तैयार करें।
Holarch 2.13 दिखाता है।
आप क्या सीखेंगे
- किसी औपचारिक जीवन चक्र में नामित समीक्षा खोजें और उसके प्रवेश मानदंड पढ़ें
- किसी प्रवेश मानदंड को उसके खोलें लिंक से पूरा करें
- किसी समीक्षा का माइलस्टोन और समीक्षा पैकेज जोड़ें
- समझाएं कि गाइड क्या दिखाती है और समीक्षा बोर्ड क्या तय करता है
NASA प्रोजेक्ट जीवन चक्र गाइड के साथ System Requirements Review (SRR) तैयार करें: मुख्य निर्णय बिंदु, किसी चरण की समीक्षाएं और मॉडल से पढ़े गए उनके प्रवेश मानदंड, किसी मानदंड के खोलें लिंक से चलाई गई गुणवत्ता जांच, टेम्पलेट से बनाया गया Systems Engineering Management Plan, और समीक्षा का माइलस्टोन और पैकेज।
प्रोजेक्ट फ़ाइलें
- शुरुआती प्रोजेक्ट (.holarch.json; प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → प्रोजेक्ट आयात करें (.json)…)
- पूरा किया गया प्रोजेक्ट (.holarch.json; प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → प्रोजेक्ट आयात करें (.json)…)
वीडियो holarch.app से चलता है; गोपनीयता नीति देखें।
अभ्यास
इसे Holarch में CubeSat EO-1 डेमो प्रोजेक्ट पर स्वयं करें।
- अपना EO-1 डेमो प्रोजेक्ट खोलें (यदि आपके पास नहीं है, तो उसे बनाएं: प्रोजेक्ट प्रबंधित करें → प्रोजेक्ट फ़ाइलें ▾ → नया डेमो प्रोजेक्ट → CubeSat (गाइडेड सिस्टम्स इंजीनियरिंग))। प्लान → SE प्रक्रिया खोलें और प्रक्रिया में NASA प्रोजेक्ट जीवन चक्र चुनें (या उसे चुनकर यह प्रक्रिया उपयोग करें पर क्लिक करें)।
- Phase B: Preliminary design and technology completion पर क्लिक करें और PDR के प्रवेश मानदंड पढ़ें: घटकों को आवंटन, इंटरफ़ेस, TPM, शमन उपाय और सत्यापन विधियां।
- किसी ऐसे मानदंड के बगल में खोलें पर क्लिक करें जो पूरा नहीं हुआ है और काम का एक हिस्सा करें, उदाहरण के लिए 2.5 Safe Mode Recovery की सत्यापन विधि सेट करें।
- SE प्रक्रिया पर लौटें और मानदंड की गिनती जांचें।
- PDR के अंतर्गत गेट माइलस्टोन जोड़ें और समीक्षा पैकेज बनाएं पर क्लिक करें, और यह देखने के लिए पैकेज खोलें कि उसने कौन-से दस्तावेज़ एकत्र किए।
आपका काम तब पूरा है जब PDR अपना माइलस्टोन और समीक्षा पैकेज दिखाता है, और जिस मानदंड पर आपने काम किया वह एक आइटम अधिक गिनता है।
स्वयं जांचें
- किसी समीक्षा के सभी प्रवेश मानदंड पूरे हैं। क्या डिज़ाइन तैयार है?
- प्रवेश मानदंड समीक्षा के दौरान के बजाय उससे पहले क्यों पढ़ें?
- अपेक्षाओं को आवश्यकताओं तक ट्रेस करने का SRR मानदंड अभी खुला है। वह क्या मांगता है?
उत्तर दिखाएं
किसी समीक्षा के सभी प्रवेश मानदंड पूरे हैं। क्या डिज़ाइन तैयार है?
ज़रूरी नहीं। गाइड दिखाती है कि मॉडल में क्या है; डिज़ाइन अच्छा है या नहीं, यह समीक्षा बोर्ड का निर्णय है।
प्रवेश मानदंड समीक्षा के दौरान के बजाय उससे पहले क्यों पढ़ें?
Holarch उन्हें मॉडल से पढ़ता है, इसलिए टीम देखती है कि क्या गायब है जबकि काम करने का समय अभी बाकी है।
अपेक्षाओं को आवश्यकताओं तक ट्रेस करने का SRR मानदंड अभी खुला है। वह क्या मांगता है?
ज़रूरतों (Statement) से उन आवश्यकताओं तक के लिंक जो उनका उत्तर देती हैं, traced to से बनाए गए। यह मॉडलिंग का काम है, टिक करने का बॉक्स नहीं।
और पढ़ें
ट्रांसक्रिप्ट
ट्रांसक्रिप्ट दिखाएं (नरेशन और स्क्रीन पर क्या है)
Introduction
Chapter four: running a technical review from the model. Formal life cycles name their reviews, and each review has entry criteria. Holarch reads the criteria from the model, so the team sees before the review what is ready.
We prepare the System Requirements Review of the Bike-Share Dock, using the NASA project life cycle.
Reviews and entry criteria
Open SE Process, and choose NASA project life cycle in the Process list. The phases run from Pre-Phase A, concept studies, to Phase F, closeout. The diamond on each phase names the key decision point that ends it.
On screen: SE Process → Process ▾ → NASA project life cycle.
Click Phase A, concept and technology development. Its reviews are at the bottom: the System Requirements Review, and the Mission or System Definition Review. Each lists its entry criteria.
On screen: Phase A → Reviews and gates.
Read the SRR's criteria. The system requirements are defined. The requirements have not been quality-checked yet, and there is no systems engineering management plan.
On screen: SRR entry criteria.
Meeting the criteria
Click Open next to the quality criterion. On the Quality page, click the run button to check every requirement. Each one gets a score, and the findings explain what to improve.
On screen: Open → Quality → run the check.
Now the management plan. Go back to SE Process, and click Open next to it. Create a new document of the type Systems Engineering Management Plan Document, from its outline.
On screen: SE Process → Open → + New Document: SEMP.
Back on SE Process, both criteria are met. The one still open, expectations traced to requirements, is real work for the team: it asks for links between the needs and the requirements that answer them.
On screen: SE Process → Phase A: criteria met; tracing still open.
Milestone and package
Click Add Gate Milestone and Create Review Package under the SRR. The package collects the requirements specification and the new management plan for the review board.
On screen: SRR: Add Gate Milestone, Create Review Package.
The guide shows what the model holds. It does not judge whether a design is good: that is the review board's decision. When the review has passed, make the phase current and move on.
On screen: Make Current Phase.
Recap
Let's recap. You switched to the NASA life cycle, read a review's entry criteria, met two of them from their Open links, added the review's milestone and package, and moved the project on.
That completes Track 7. More tracks are at holarch.app slash training.