Kurs bölümleri
Eğitim · Kurs 7. Bir süreci izleme · Bölüm 7.1 / 4
7.1 Bir süreç kılavuzu seçme 3:08
Bir projeyi bir sistem mühendisliği yaşam döngüsü boyunca izleyin.
Holarch 2.41'yi gösterir.
Neler öğreneceksiniz
- Altı süreç kılavuzunu ve her birinin dayandığı kaynakları karşılaştırın
- Bir proje için bir süreç kılavuzunu açın
- Bir kılavuzun yaşam döngüsünü, evrelerini ve adım ya da süreç kartlarını okuyun
- Her kılavuzdaki yerinizi kaybetmeden kılavuzlar arasında geçiş yapın
Bike-Share Dock projesi için Holarch'ın SE Süreci kılavuzunu açın: aralarından seçim yapılacak altı süreç (Kossiakoff SE yöntemi, ISO/IEC/IEEE 15288, NASA proje yaşam döngüsü, DoD tedarik yaşam döngüsü, MIL-STD-499B süreç döngüsü ve V modeli), aşamaları ve evreleriyle yaşam döngüsü, bir evrenin adımları ve yerinizi kaybetmeden süreçler arasında geçiş.
Proje dosyaları
- Başlangıç projesi (.holarch.json; Projeleri yönet → Proje dosyaları ▾ → Proje içe aktar (.json)…)
- Bitmiş proje (.holarch.json; Projeleri yönet → Proje dosyaları ▾ → Proje içe aktar (.json)…)
Video holarch.app'ten oynatılır; bkz. Gizlilik Politikası.
Alıştırma
Bunu Holarch'ta, CubeSat EO-1 demo projesinde kendiniz yapın.
- EO-1 demo projenizi açın (yoksa oluşturun: Projeleri yönet → Proje dosyaları ▾ → Yeni demo proje → CubeSat (Rehberli sistem mühendisliği)). Şeritte Plan → SE Süreci'ni açın.
- Listede önce V modeli'ni, ardından DoD tedarik yaşam döngüsü'nü seçin ve her birinin özetini ve kaynaklarını okuyun.
- ISO/IEC/IEEE 15288'i seçin ve Bu süreci kullan'a tıklayın.
- Concept aşamasını okuyun: teknik süreç kartlarını, ardından onlardan sonraki teknik yönetim süreçlerini; EO-1'in hangi denetimleri zaten karşıladığına dikkat edin.
- Süreç'te V modeli'ne geçin, ilk evresine bakın, ardından ISO/IEC/IEEE 15288'e geri dönün.
SE Süreci sayfası, Concept aşaması Geçerli olarak işaretlenmiş ISO/IEC/IEEE 15288'i gösterdiğinde işiniz bitmiştir.
Kendinizi sınayın
- Bir süreç kılavuzunu açmak modeli değiştirir mi?
- Bir kılavuzdan diğerine geçip geri dönüyorsunuz. İşaretlerinize ve karar noktalarınıza ne olur?
- Kılavuzlar arasında nasıl seçim yaparsınız?
Yanıtları göster
Bir süreç kılavuzunu açmak modeli değiştirir mi?
Hayır. Kılavuz modeli okur ve her evrenin hâlâ neye ihtiyaç duyduğunu gösterir. Süreç seçimi projeyle birlikte kaydedilir ve üyeleriyle paylaşılır; ⌘Z / Ctrl+Z bunu geri alır.
Bir kılavuzdan diğerine geçip geri dönüyorsunuz. İşaretlerinize ve karar noktalarınıza ne olur?
Her süreç kendi geçerli evresini, işaretlenmiş denetimlerini ve karar noktalarını korur; bu yüzden geri dönmek sizi kaldığınız yere getirir.
Kılavuzlar arasında nasıl seçim yaparsınız?
Programınızın veya dersinizin izlediğini seçin: her kılavuzun yapısı, NASA yaşam döngüsü için NPR 7123.1 gibi altında adı geçen kaynakları izler. Açıklamalar ve denetimler Holarch'ın kendisine aittir.
Daha fazla bilgi
Döküm
Dökümü göster (anlatım ve ekranda görünenler)
Introduction
Welcome to Track 7, following a process. A model tells you what you have built. A process guide tells you what to do next, and checks the model to show how far each phase has come.
In this chapter you turn on a process guide for the Bike-Share Dock project, and learn how a guide is laid out.
The process guides
Open Plan and Deliver in the rail, then SE Process. Until a project uses a guide, the page explains what a guide does and lists the processes you can follow.
On screen: Plan & Deliver → SE Process.
There are six. The Kossiakoff systems engineering method, ISO/IEC/IEEE 15288, the NASA project life cycle, the DoD acquisition life cycle, the MIL-STD-499B process loop, and the Vee model. Each has a one-line summary.
On screen: The six processes.
Select one to read more about it. The NASA life cycle runs from concept studies to closeout, and each phase ends at a key decision point. The line at the bottom names the sources the guide is based on: here NPR 7123.1 and the NASA Systems Engineering Handbook.
On screen: Select NASA project life cycle; its intro and sources.
Turn on a guide
For this project, choose the Kossiakoff method. It is based on the method described by Kossiakoff and his co-authors in Systems Engineering Principles and Practice. Click Use This Process.
On screen: Select Kossiakoff SE method → Use This Process.
Life cycle, phases and steps
The life cycle appears at the top. Kossiakoff has three stages: concept development, engineering development, and post-development, in eight phases. Each phase shows how much of its work is done, and the first phase, needs analysis, is marked current.
On screen: The life cycle: stages, phases, percentages, Current.
Below it is the phase you are looking at, with its aim: show that a real need exists, and that a system to meet it is feasible.
On screen: Phase card: Needs analysis and its aim.
Then come the four steps of the method, which repeat in every phase: requirements analysis, functional definition, physical definition, and design validation. Each step lists the checks for this phase. The next chapter works through them.
On screen: The four step cards.
Switch guides
A project can switch guides at any time. Choose ISO/IEC/IEEE 15288 in the Process list. Its six life-cycle stages run from concept to retirement, and the technical processes of the standard become the cards, with the technical management processes after them.
On screen: Process ▾ → ISO/IEC/IEEE 15288.
Switch back to the Kossiakoff method. Each guide keeps its own current phase, ticked checks and gates, so switching back brings you to where you were.
On screen: Process ▾ → Kossiakoff SE method.
Recap
Let's recap. You opened the SE Process page, compared the six guides and their sources, turned on the Kossiakoff method, read its life cycle, phases and steps, and switched guides without losing your place.
Next, you work through the checks of the first phase.