Holarch
Capitoli del corso

Formazione · Percorso 7. Seguire un processo · Capitolo 7.1 di 4

7.1 Scegliere una guida di processo 3:08

Seguire un progetto lungo il ciclo di vita dell’ingegneria dei sistemi.

Mostra Holarch 2.41.

Tutti i capitoli · 7.2 Controlli in tempo reale e il lavoro che indicano →

Che cosa si impara

  • Confrontare le sei guide di processo e le fonti su cui si basa ciascuna
  • Attivare una guida di processo per un progetto
  • Leggere il ciclo di vita, le fasi e le schede dei passi o dei processi di una guida
  • Passare da una guida all’altra senza perdere il punto raggiunto in ciascuna

Attivare la guida Processo SE di Holarch per il progetto Bike-Share Dock: i sei processi tra cui scegliere (il metodo SE di Kossiakoff, ISO/IEC/IEEE 15288, il ciclo di vita dei progetti NASA, il ciclo di vita delle acquisizioni DoD, il ciclo di processo MIL-STD-499B e il modello a V), il ciclo di vita con stadi e fasi, i passi di una fase e il passaggio da un processo all’altro senza perdere il punto raggiunto.

File di progetto

  • Progetto iniziale (.holarch.json; Gestisci progetti → File di progetto ▾ → Importa progetto (.json)…)
  • Progetto completato (.holarch.json; Gestisci progetti → File di progetto ▾ → Importa progetto (.json)…)

Il video viene riprodotto da holarch.app; vedere l’Informativa sulla privacy.

Esercitazione

Provare in prima persona in Holarch, sul progetto demo CubeSat EO-1.

  1. Aprire il proprio progetto demo EO-1 (se non lo si ha, crearlo: Gestisci progetti → File di progetto ▾ → Nuovo progetto demo → CubeSat (ingegneria dei sistemi guidata)). Nella barra laterale, aprire Pianifica → Processo SE.
  2. Selezionare nell’elenco Modello a V e poi Ciclo di vita delle acquisizioni DoD, e leggere il riepilogo e le fonti di ciascuno.
  3. Selezionare ISO/IEC/IEEE 15288 e fare clic su Usa questo processo.
  4. Leggere lo stadio Concept: le schede dei processi tecnici, poi i processi di gestione tecnica che li seguono, e notare quali controlli EO-1 soddisfa già.
  5. In Processo, passare a Modello a V, guardarne la prima fase, poi tornare a ISO/IEC/IEEE 15288.

L’esercizio è completato quando la pagina Processo SE mostra ISO/IEC/IEEE 15288 con lo stadio Concept contrassegnato come Attuale.

Verifica

  1. Attivare una guida di processo modifica il modello?
  2. Si passa da una guida a un’altra e si torna indietro. Che cosa succede alle spunte e ai gate?
  3. Come si sceglie tra le guide?
Mostra le risposte
  1. Attivare una guida di processo modifica il modello?

    No. La guida legge il modello e mostra che cosa manca ancora a ogni fase. La scelta del processo viene salvata con il progetto e condivisa con i suoi membri, e ⌘Z / Ctrl+Z la annulla.

  2. Si passa da una guida a un’altra e si torna indietro. Che cosa succede alle spunte e ai gate?

    Ogni processo mantiene la propria fase attuale, i controlli spuntati e i gate, quindi tornando indietro si ritrova il punto in cui si era.

  3. Come si sceglie tra le guide?

    Scegliere quella seguita dal proprio programma o corso: la struttura di ogni guida segue le fonti indicate sotto di essa, come NPR 7123.1 per il ciclo di vita NASA. Le descrizioni e i controlli sono di Holarch.

Per saperne di più

Trascrizione

Mostra la trascrizione (narrazione e contenuto dello schermo)

Introduction

Welcome to Track 7, following a process. A model tells you what you have built. A process guide tells you what to do next, and checks the model to show how far each phase has come.

In this chapter you turn on a process guide for the Bike-Share Dock project, and learn how a guide is laid out.

The process guides

Open Plan and Deliver in the rail, then SE Process. Until a project uses a guide, the page explains what a guide does and lists the processes you can follow.

On screen: Plan & Deliver → SE Process.

There are six. The Kossiakoff systems engineering method, ISO/IEC/IEEE 15288, the NASA project life cycle, the DoD acquisition life cycle, the MIL-STD-499B process loop, and the Vee model. Each has a one-line summary.

On screen: The six processes.

Select one to read more about it. The NASA life cycle runs from concept studies to closeout, and each phase ends at a key decision point. The line at the bottom names the sources the guide is based on: here NPR 7123.1 and the NASA Systems Engineering Handbook.

On screen: Select NASA project life cycle; its intro and sources.

Turn on a guide

For this project, choose the Kossiakoff method. It is based on the method described by Kossiakoff and his co-authors in Systems Engineering Principles and Practice. Click Use This Process.

On screen: Select Kossiakoff SE method → Use This Process.

Life cycle, phases and steps

The life cycle appears at the top. Kossiakoff has three stages: concept development, engineering development, and post-development, in eight phases. Each phase shows how much of its work is done, and the first phase, needs analysis, is marked current.

On screen: The life cycle: stages, phases, percentages, Current.

Below it is the phase you are looking at, with its aim: show that a real need exists, and that a system to meet it is feasible.

On screen: Phase card: Needs analysis and its aim.

Then come the four steps of the method, which repeat in every phase: requirements analysis, functional definition, physical definition, and design validation. Each step lists the checks for this phase. The next chapter works through them.

On screen: The four step cards.

Switch guides

A project can switch guides at any time. Choose ISO/IEC/IEEE 15288 in the Process list. Its six life-cycle stages run from concept to retirement, and the technical processes of the standard become the cards, with the technical management processes after them.

On screen: Process ▾ → ISO/IEC/IEEE 15288.

Switch back to the Kossiakoff method. Each guide keeps its own current phase, ticked checks and gates, so switching back brings you to where you were.

On screen: Process ▾ → Kossiakoff SE method.

Recap

Let's recap. You opened the SE Process page, compared the six guides and their sources, turned on the Kossiakoff method, read its life cycle, phases and steps, and switched guides without losing your place.

Next, you work through the checks of the first phase.