Holarch
פרקי הקורס

הדרכה · מסלול 7. עבודה לפי תהליך · פרק 7.1 מתוך 4

7.1 בחירת מדריך תהליך 3:08

מלווים פרויקט לאורך מחזור חיים של הנדסת מערכות.

מציג את Holarch 2.41.

מה תלמדו

  • להשוות בין ששת מדריכי התהליך ובין המקורות שכל אחד מבוסס עליהם
  • להפעיל מדריך תהליך לפרויקט
  • לקרוא את מחזור החיים, השלבים וכרטיסי הצעדים או התהליכים של מדריך
  • לעבור בין מדריכים בלי לאבד את המקום בכל מדריך

מפעילים את מדריך תהליך הנדסת המערכות של Holarch לפרויקט Bike-Share Dock: ששת התהליכים לבחירה (שיטת ה-SE של Kossiakoff, ‏ISO/IEC/IEEE 15288, מחזור החיים של פרויקט NASA, מחזור חיי הרכש של DoD, לולאת התהליך של MIL-STD-499B ומודל ה-V), מחזור החיים עם השלבים והפאזות שלו, הצעדים של שלב, ומעבר בין תהליכים בלי לאבד את המקום.

קובצי פרויקט

  • פרויקט התחלה (.holarch.json; ניהול פרויקטים ← קובצי פרויקט ▾ ← ייבוא פרויקט (.json)…)
  • פרויקט גמור (.holarch.json; ניהול פרויקטים ← קובצי פרויקט ▾ ← ייבוא פרויקט (.json)…)

הסרטון מוצג מ-holarch.app; ראו את מדיניות הפרטיות.

תרגול

עשו זאת בעצמכם ב-Holarch, על פרויקט ההדגמה CubeSat EO-1.

  1. פותחים את פרויקט ההדגמה EO-1 (אם אין לכם כזה, יוצרים אותו: ניהול פרויקטים ← קובצי פרויקט ▾ ← פרויקט הדגמה חדש ← CubeSat (הנדסת מערכות מודרכת)). בפס הניווט פותחים את תוכנית ← תהליך הנדסת מערכות.
  2. בוחרים ברשימה את מודל V ואחר כך את מחזור חיי הרכש של DoD, וקוראים את הסיכום והמקורות של כל אחד.
  3. בוחרים ISO/IEC/IEEE 15288 ולוחצים על שימוש בתהליך הזה.
  4. קוראים את שלב Concept: כרטיסי התהליכים הטכניים, ואחריהם תהליכי הניהול הטכני, ושמים לב באילו בדיקות EO-1 כבר עומד.
  5. בתפריט תהליך עוברים ל-מודל V, מסתכלים על השלב הראשון שלו, ואז חוזרים ל-ISO/IEC/IEEE 15288.

סיימתם כשדף תהליך הנדסת המערכות מציג את ISO/IEC/IEEE 15288 עם שלב Concept מסומן כנוכחי.

בדיקה עצמית

  1. האם הפעלת מדריך תהליך משנה את המודל?
  2. עוברים ממדריך אחד לאחר וחוזרים. מה קורה לסימונים ולשערים שלכם?
  3. איך בוחרים בין המדריכים?
הצגת התשובות
  1. האם הפעלת מדריך תהליך משנה את המודל?

    לא. המדריך קורא את המודל ומציג מה כל שלב עדיין צריך. בחירת התהליך נשמרת עם הפרויקט ומשותפת עם החברים בו, ו-⌘Z / Ctrl+Z מבטל אותה.

  2. עוברים ממדריך אחד לאחר וחוזרים. מה קורה לסימונים ולשערים שלכם?

    כל תהליך שומר את השלב הנוכחי שלו, את הבדיקות המסומנות ואת השערים, כך שחזרה מחזירה אתכם למקום שבו הייתם.

  3. איך בוחרים בין המדריכים?

    בוחרים את זה שהתוכנית או הקורס שלכם עוקבים אחריו: המבנה של כל מדריך עוקב אחר המקורות שמצוינים תחתיו, כמו NPR 7123.1 עבור מחזור החיים של NASA. התיאורים והבדיקות הם של Holarch עצמו.

קריאה נוספת

תמליל

הצגת התמליל (הקריינות ומה שמוצג על המסך)

Introduction

Welcome to Track 7, following a process. A model tells you what you have built. A process guide tells you what to do next, and checks the model to show how far each phase has come.

In this chapter you turn on a process guide for the Bike-Share Dock project, and learn how a guide is laid out.

The process guides

Open Plan and Deliver in the rail, then SE Process. Until a project uses a guide, the page explains what a guide does and lists the processes you can follow.

On screen: Plan & Deliver → SE Process.

There are six. The Kossiakoff systems engineering method, ISO/IEC/IEEE 15288, the NASA project life cycle, the DoD acquisition life cycle, the MIL-STD-499B process loop, and the Vee model. Each has a one-line summary.

On screen: The six processes.

Select one to read more about it. The NASA life cycle runs from concept studies to closeout, and each phase ends at a key decision point. The line at the bottom names the sources the guide is based on: here NPR 7123.1 and the NASA Systems Engineering Handbook.

On screen: Select NASA project life cycle; its intro and sources.

Turn on a guide

For this project, choose the Kossiakoff method. It is based on the method described by Kossiakoff and his co-authors in Systems Engineering Principles and Practice. Click Use This Process.

On screen: Select Kossiakoff SE method → Use This Process.

Life cycle, phases and steps

The life cycle appears at the top. Kossiakoff has three stages: concept development, engineering development, and post-development, in eight phases. Each phase shows how much of its work is done, and the first phase, needs analysis, is marked current.

On screen: The life cycle: stages, phases, percentages, Current.

Below it is the phase you are looking at, with its aim: show that a real need exists, and that a system to meet it is feasible.

On screen: Phase card: Needs analysis and its aim.

Then come the four steps of the method, which repeat in every phase: requirements analysis, functional definition, physical definition, and design validation. Each step lists the checks for this phase. The next chapter works through them.

On screen: The four step cards.

Switch guides

A project can switch guides at any time. Choose ISO/IEC/IEEE 15288 in the Process list. Its six life-cycle stages run from concept to retirement, and the technical processes of the standard become the cards, with the technical management processes after them.

On screen: Process ▾ → ISO/IEC/IEEE 15288.

Switch back to the Kossiakoff method. Each guide keeps its own current phase, ticked checks and gates, so switching back brings you to where you were.

On screen: Process ▾ → Kossiakoff SE method.

Recap

Let's recap. You opened the SE Process page, compared the six guides and their sources, turned on the Kossiakoff method, read its life cycle, phases and steps, and switched guides without losing your place.

Next, you work through the checks of the first phase.