Holarch
コースのチャプター

トレーニング · トラック 7. プロセスに沿った作業 · チャプター 7.1(全 4 チャプター)

7.1 プロセスガイドの選択 3:08

システムズエンジニアリングのライフサイクルに沿ってプロジェクトを進めます。

Holarch 2.41 の画面です。

学習内容

  • 6 つのプロセスガイドと、それぞれの基になっている出典を比較する
  • プロジェクトでプロセスガイドを有効にする
  • ガイドのライフサイクル、フェーズ、ステップやプロセスのカードを読む
  • 各ガイドの進捗を失わずにガイドを切り替える

Bike-Share Dock プロジェクトで Holarch の SE プロセスガイドを有効にします。選べる 6 つのプロセス(Kossiakoff の SE 手法、ISO/IEC/IEEE 15288、NASA プロジェクトライフサイクル、DoD 調達ライフサイクル、MIL-STD-499B のプロセスループ、V モデル)、ステージとフェーズからなるライフサイクル、フェーズのステップ、そして進捗を失わずにプロセスを切り替える方法を扱います。

プロジェクトファイル

  • 開始時のプロジェクト (.holarch.json。プロジェクトを管理 → プロジェクトファイル ▾ → プロジェクトをインポート (.json)…)
  • 完成したプロジェクト (.holarch.json。プロジェクトを管理 → プロジェクトファイル ▾ → プロジェクトをインポート (.json)…)

動画は holarch.app から再生されます。プライバシーポリシーをご覧ください。

演習

CubeSat EO-1 デモプロジェクトを使って、Holarch で実際に操作します。

  1. EO-1 デモプロジェクトを開きます(ない場合は作成します:プロジェクトを管理 → プロジェクトファイル ▾ → 新しいデモプロジェクト → CubeSat(ガイド付きシステムズエンジニアリング))。レールで計画 → SE プロセスを開きます。
  2. 一覧で V モデル、続いて DoD 調達ライフサイクルを選択し、それぞれの概要と出典を読みます。
  3. ISO/IEC/IEEE 15288 を選択し、このプロセスを使用をクリックします。
  4. Concept ステージを読みます。テクニカルプロセスのカード、続いてテクニカルマネジメントプロセスを読み、EO-1 がすでに満たしているチェックを確認します。
  5. プロセスで V モデルに切り替えて最初のフェーズを確認し、ISO/IEC/IEEE 15288 に戻します。

SE プロセスページに ISO/IEC/IEEE 15288 が表示され、その Concept ステージが「現在」になっていれば完了です。

確認問題

  1. プロセスガイドを有効にすると、モデルは変わりますか?
  2. あるガイドから別のガイドに切り替えて戻ります。チェックとゲートはどうなりますか?
  3. ガイドはどのように選びますか?
解答を表示
  1. プロセスガイドを有効にすると、モデルは変わりますか?

    いいえ。ガイドはモデルを読み、各フェーズにまだ何が必要かを示します。プロセスの選択はプロジェクトとともに保存されてメンバーと共有され、⌘Z / Ctrl+Z で元に戻せます。

  2. あるガイドから別のガイドに切り替えて戻ります。チェックとゲートはどうなりますか?

    各プロセスは現在のフェーズ、チェック済みの項目、ゲートを個別に保持するため、元に戻ると以前の位置から再開できます。

  3. ガイドはどのように選びますか?

    プログラムやコースが従っているものを選びます。各ガイドの構成は、NASA ライフサイクルの NPR 7123.1 のように、ガイドの下に記載された出典に従っています。説明とチェックは Holarch 独自のものです。

関連資料

トランスクリプト

トランスクリプトを表示 (ナレーションと画面の内容)

Introduction

Welcome to Track 7, following a process. A model tells you what you have built. A process guide tells you what to do next, and checks the model to show how far each phase has come.

In this chapter you turn on a process guide for the Bike-Share Dock project, and learn how a guide is laid out.

The process guides

Open Plan and Deliver in the rail, then SE Process. Until a project uses a guide, the page explains what a guide does and lists the processes you can follow.

On screen: Plan & Deliver → SE Process.

There are six. The Kossiakoff systems engineering method, ISO/IEC/IEEE 15288, the NASA project life cycle, the DoD acquisition life cycle, the MIL-STD-499B process loop, and the Vee model. Each has a one-line summary.

On screen: The six processes.

Select one to read more about it. The NASA life cycle runs from concept studies to closeout, and each phase ends at a key decision point. The line at the bottom names the sources the guide is based on: here NPR 7123.1 and the NASA Systems Engineering Handbook.

On screen: Select NASA project life cycle; its intro and sources.

Turn on a guide

For this project, choose the Kossiakoff method. It is based on the method described by Kossiakoff and his co-authors in Systems Engineering Principles and Practice. Click Use This Process.

On screen: Select Kossiakoff SE method → Use This Process.

Life cycle, phases and steps

The life cycle appears at the top. Kossiakoff has three stages: concept development, engineering development, and post-development, in eight phases. Each phase shows how much of its work is done, and the first phase, needs analysis, is marked current.

On screen: The life cycle: stages, phases, percentages, Current.

Below it is the phase you are looking at, with its aim: show that a real need exists, and that a system to meet it is feasible.

On screen: Phase card: Needs analysis and its aim.

Then come the four steps of the method, which repeat in every phase: requirements analysis, functional definition, physical definition, and design validation. Each step lists the checks for this phase. The next chapter works through them.

On screen: The four step cards.

Switch guides

A project can switch guides at any time. Choose ISO/IEC/IEEE 15288 in the Process list. Its six life-cycle stages run from concept to retirement, and the technical processes of the standard become the cards, with the technical management processes after them.

On screen: Process ▾ → ISO/IEC/IEEE 15288.

Switch back to the Kossiakoff method. Each guide keeps its own current phase, ticked checks and gates, so switching back brings you to where you were.

On screen: Process ▾ → Kossiakoff SE method.

Recap

Let's recap. You opened the SE Process page, compared the six guides and their sources, turned on the Kossiakoff method, read its life cycle, phases and steps, and switched guides without losing your place.

Next, you work through the checks of the first phase.