Rozdziały kursu
Szkolenia · Ścieżka 7. Praca według procesu · Rozdział 7.1 z 4
7.1 Wybór przewodnika po procesie 3:08
Prowadź projekt przez cykl życia inżynierii systemów.
Pokazuje Holarch 2.41.
Czego się nauczysz
- Porównywanie sześciu przewodników po procesach i źródeł, na których się opierają
- Włączanie przewodnika po procesie w projekcie
- Odczytywanie cyklu życia, faz oraz kart kroków lub procesów przewodnika
- Przełączanie między przewodnikami bez utraty miejsca w każdym z nich
Włącz przewodnik Proces SE w Holarch dla projektu Bike-Share Dock: sześć procesów do wyboru (metoda SE Kossiakoffa, ISO/IEC/IEEE 15288, cykl życia projektu NASA, cykl życia pozyskiwania DoD, pętla procesu MIL-STD-499B i model V), cykl życia z etapami i fazami, kroki fazy oraz przełączanie między procesami bez utraty miejsca.
Pliki projektu
- Projekt początkowy (.holarch.json; Zarządzaj projektami → Pliki projektu ▾ → Importuj projekt (.json)…)
- Projekt ukończony (.holarch.json; Zarządzaj projektami → Pliki projektu ▾ → Importuj projekt (.json)…)
Film jest odtwarzany z holarch.app; zobacz Politykę prywatności.
Ćwiczenie
Wykonaj to samodzielnie w Holarch, w projekcie demonstracyjnym CubeSat EO-1.
- Otwórz swój projekt demonstracyjny EO-1 (jeśli go nie masz, utwórz go: Zarządzaj projektami → Pliki projektu ▾ → Nowy projekt demonstracyjny → CubeSat (inżynieria systemów z przewodnikiem)). Na pasku nawigacji otwórz Plan → Proces SE.
- Zaznacz na liście Model V, a następnie Cykl życia pozyskiwania DoD i przeczytaj podsumowanie i źródła każdego z nich.
- Zaznacz ISO/IEC/IEEE 15288 i kliknij Użyj tego procesu.
- Przeczytaj etap Koncepcja: karty procesów technicznych, a po nich procesy zarządzania technicznego, i zwróć uwagę, które kontrole EO-1 już spełnia.
- W polu Proces przełącz na Model V, obejrzyj jego pierwszą fazę, a następnie przełącz z powrotem na ISO/IEC/IEEE 15288.
Gotowe, gdy strona Proces SE pokazuje ISO/IEC/IEEE 15288 z etapem Koncepcja oznaczonym jako Bieżący.
Sprawdź się
- Czy włączenie przewodnika po procesie zmienia model?
- Przełączasz się z jednego przewodnika na inny i z powrotem. Co dzieje się z twoimi zaznaczeniami i bramkami?
- Jak wybrać przewodnik?
Pokaż odpowiedzi
Czy włączenie przewodnika po procesie zmienia model?
Nie. Przewodnik odczytuje model i pokazuje, czego każda faza jeszcze wymaga. Wybór procesu jest zapisywany z projektem i współdzielony z jego członkami, a ⌘Z / Ctrl+Z go cofa.
Przełączasz się z jednego przewodnika na inny i z powrotem. Co dzieje się z twoimi zaznaczeniami i bramkami?
Każdy proces zachowuje własną bieżącą fazę, zaznaczone kontrole i bramki, więc powrót przywraca cię tam, gdzie byłeś.
Jak wybrać przewodnik?
Wybierz ten, którego przestrzega twój program lub kurs: struktura każdego przewodnika odpowiada źródłom wymienionym pod nim, np. NPR 7123.1 dla cyklu życia NASA. Opisy i kontrole są autorstwa Holarch.
Więcej informacji
Transkrypcja
Pokaż transkrypcję (narracja i to, co widać na ekranie)
Introduction
Welcome to Track 7, following a process. A model tells you what you have built. A process guide tells you what to do next, and checks the model to show how far each phase has come.
In this chapter you turn on a process guide for the Bike-Share Dock project, and learn how a guide is laid out.
The process guides
Open Plan and Deliver in the rail, then SE Process. Until a project uses a guide, the page explains what a guide does and lists the processes you can follow.
On screen: Plan & Deliver → SE Process.
There are six. The Kossiakoff systems engineering method, ISO/IEC/IEEE 15288, the NASA project life cycle, the DoD acquisition life cycle, the MIL-STD-499B process loop, and the Vee model. Each has a one-line summary.
On screen: The six processes.
Select one to read more about it. The NASA life cycle runs from concept studies to closeout, and each phase ends at a key decision point. The line at the bottom names the sources the guide is based on: here NPR 7123.1 and the NASA Systems Engineering Handbook.
On screen: Select NASA project life cycle; its intro and sources.
Turn on a guide
For this project, choose the Kossiakoff method. It is based on the method described by Kossiakoff and his co-authors in Systems Engineering Principles and Practice. Click Use This Process.
On screen: Select Kossiakoff SE method → Use This Process.
Life cycle, phases and steps
The life cycle appears at the top. Kossiakoff has three stages: concept development, engineering development, and post-development, in eight phases. Each phase shows how much of its work is done, and the first phase, needs analysis, is marked current.
On screen: The life cycle: stages, phases, percentages, Current.
Below it is the phase you are looking at, with its aim: show that a real need exists, and that a system to meet it is feasible.
On screen: Phase card: Needs analysis and its aim.
Then come the four steps of the method, which repeat in every phase: requirements analysis, functional definition, physical definition, and design validation. Each step lists the checks for this phase. The next chapter works through them.
On screen: The four step cards.
Switch guides
A project can switch guides at any time. Choose ISO/IEC/IEEE 15288 in the Process list. Its six life-cycle stages run from concept to retirement, and the technical processes of the standard become the cards, with the technical management processes after them.
On screen: Process ▾ → ISO/IEC/IEEE 15288.
Switch back to the Kossiakoff method. Each guide keeps its own current phase, ticked checks and gates, so switching back brings you to where you were.
On screen: Process ▾ → Kossiakoff SE method.
Recap
Let's recap. You opened the SE Process page, compared the six guides and their sources, turned on the Kossiakoff method, read its life cycle, phases and steps, and switched guides without losing your place.
Next, you work through the checks of the first phase.