Holarch
课程章节

培训 · 课程 7. 遵循流程 · 第 7.1 章,共 4 章

7.1 选择流程指南 3:08

跟随一个项目走完系统工程生命周期。

演示 Holarch 2.41。

您将学到

  • 比较六种流程指南及其各自依据的来源
  • 为项目启用流程指南
  • 查看指南的生命周期、阶段以及步骤卡片或过程卡片
  • 在指南之间切换,而不丢失每个指南的进度

为 Bike-Share Dock 项目启用 Holarch 的 SE 流程指南:可选择的六种流程(Kossiakoff SE 方法、ISO/IEC/IEEE 15288、NASA 项目生命周期、DoD 采办生命周期、MIL-STD-499B 流程循环和 V 模型),包含阶段和子阶段的生命周期、某一阶段的步骤,以及在流程之间切换而不丢失进度。

项目文件

  • 起始项目 (.holarch.json;管理项目 → 项目文件 ▾ → 导入项目 (.json)…)
  • 完成项目 (.holarch.json;管理项目 → 项目文件 ▾ → 导入项目 (.json)…)

视频从 holarch.app 播放;参见隐私政策。

练习

在 Holarch 中基于 CubeSat EO-1 演示项目亲自完成此操作。

  1. 打开您的 EO-1 演示项目(如果没有,请创建:管理项目 → 项目文件 ▾ → 新建演示项目 → CubeSat(引导式系统工程))。在侧栏中打开 计划 → SE 流程。
  2. 在列表中依次选择 V 模型 和 DoD 采办生命周期,阅读各自的摘要和来源。
  3. 选择 ISO/IEC/IEEE 15288,然后单击 使用此流程。
  4. 阅读 Concept 阶段:先是技术过程卡片,然后是其后的技术管理过程,并留意 EO-1 已经满足哪些检查。
  5. 在 流程 中切换到 V 模型,查看其第一个阶段,然后切换回 ISO/IEC/IEEE 15288。

当 SE 流程页面显示 ISO/IEC/IEEE 15288 且其 Concept 阶段标为“当前”时,即完成练习。

自测

  1. 启用流程指南会更改模型吗?
  2. 您从一个指南切换到另一个指南,然后又切换回来。您的勾选和关口会怎样?
  3. 如何在这些指南之间做出选择?
显示答案
  1. 启用流程指南会更改模型吗?

    不会。指南读取模型,并显示每个阶段还需要什么。所选流程随项目保存,并与项目成员共享,⌘Z / Ctrl+Z 可以撤销该选择。

  2. 您从一个指南切换到另一个指南,然后又切换回来。您的勾选和关口会怎样?

    每个流程都保留自己的当前阶段、已勾选的检查和关口,因此切换回来后会回到您原来的位置。

  3. 如何在这些指南之间做出选择?

    选择您的项目群或课程所遵循的那个:每个指南的结构都遵循其下列出的来源,例如 NASA 生命周期依据 NPR 7123.1。描述和检查由 Holarch 自行编写。

延伸阅读

文字稿

显示文字稿 (旁白和屏幕内容)

Introduction

Welcome to Track 7, following a process. A model tells you what you have built. A process guide tells you what to do next, and checks the model to show how far each phase has come.

In this chapter you turn on a process guide for the Bike-Share Dock project, and learn how a guide is laid out.

The process guides

Open Plan and Deliver in the rail, then SE Process. Until a project uses a guide, the page explains what a guide does and lists the processes you can follow.

On screen: Plan & Deliver → SE Process.

There are six. The Kossiakoff systems engineering method, ISO/IEC/IEEE 15288, the NASA project life cycle, the DoD acquisition life cycle, the MIL-STD-499B process loop, and the Vee model. Each has a one-line summary.

On screen: The six processes.

Select one to read more about it. The NASA life cycle runs from concept studies to closeout, and each phase ends at a key decision point. The line at the bottom names the sources the guide is based on: here NPR 7123.1 and the NASA Systems Engineering Handbook.

On screen: Select NASA project life cycle; its intro and sources.

Turn on a guide

For this project, choose the Kossiakoff method. It is based on the method described by Kossiakoff and his co-authors in Systems Engineering Principles and Practice. Click Use This Process.

On screen: Select Kossiakoff SE method → Use This Process.

Life cycle, phases and steps

The life cycle appears at the top. Kossiakoff has three stages: concept development, engineering development, and post-development, in eight phases. Each phase shows how much of its work is done, and the first phase, needs analysis, is marked current.

On screen: The life cycle: stages, phases, percentages, Current.

Below it is the phase you are looking at, with its aim: show that a real need exists, and that a system to meet it is feasible.

On screen: Phase card: Needs analysis and its aim.

Then come the four steps of the method, which repeat in every phase: requirements analysis, functional definition, physical definition, and design validation. Each step lists the checks for this phase. The next chapter works through them.

On screen: The four step cards.

Switch guides

A project can switch guides at any time. Choose ISO/IEC/IEEE 15288 in the Process list. Its six life-cycle stages run from concept to retirement, and the technical processes of the standard become the cards, with the technical management processes after them.

On screen: Process ▾ → ISO/IEC/IEEE 15288.

Switch back to the Kossiakoff method. Each guide keeps its own current phase, ticked checks and gates, so switching back brings you to where you were.

On screen: Process ▾ → Kossiakoff SE method.

Recap

Let's recap. You opened the SE Process page, compared the six guides and their sources, turned on the Kossiakoff method, read its life cycle, phases and steps, and switched guides without losing your place.

Next, you work through the checks of the first phase.