Holarch
Розділи курсів

Навчання · Курс 7. Робота за процесом · Розділ 7.1 з 4

7.1 Вибір посібника з процесу 3:08

Проведіть проєкт через життєвий цикл системної інженерії.

Показано Holarch 2.41.

Усі розділи · 7.2 Живі перевірки та робота, на яку вони вказують →

Що ви дізнаєтеся

  • Порівняти шість посібників з процесу та джерела, на яких базується кожен
  • Увімкнути посібник з процесу для проєкту
  • Читати життєвий цикл, фази й картки кроків чи процесів посібника
  • Перемикатися між посібниками, не втрачаючи місця в кожному з них

Увімкніть посібник Процес SE у Holarch для проєкту Bike-Share Dock: шість процесів на вибір (метод SE Коссякоффа, ISO/IEC/IEEE 15288, життєвий цикл проєкту NASA, життєвий цикл закупівель DoD, цикл процесу MIL-STD-499B і V-модель), життєвий цикл з його стадіями й фазами, кроки фази та перемикання між процесами без втрати місця.

Файли проєкту

  • Початковий проєкт (.holarch.json; Керування проєктами → Файли проєкту ▾ → Імпортувати проєкт (.json)…)
  • Готовий проєкт (.holarch.json; Керування проєктами → Файли проєкту ▾ → Імпортувати проєкт (.json)…)

Відео відтворюється з holarch.app; див. Політику конфіденційності.

Практика

Виконайте це самостійно в Holarch на демопроєкті CubeSat EO-1.

  1. Відкрийте свій демопроєкт EO-1 (якщо його немає, створіть: Керування проєктами → Файли проєкту ▾ → Новий демопроєкт → CubeSat (системна інженерія з посібником)). На бічній панелі відкрийте Планування → Процес SE.
  2. Виберіть у списку V-модель, а потім Життєвий цикл закупівель DoD і прочитайте підсумок і джерела кожного.
  3. Виберіть ISO/IEC/IEEE 15288 і натисніть Використати цей процес.
  4. Прочитайте стадію «Концепція»: картки технічних процесів, потім процеси технічного керування після них, і зверніть увагу, які перевірки EO-1 уже виконує.
  5. У полі Процес перейдіть на V-модель, подивіться на її першу фазу, потім поверніться до ISO/IEC/IEEE 15288.

Завдання виконано, коли сторінка «Процес SE» показує ISO/IEC/IEEE 15288 зі стадією «Концепція», позначеною як поточна.

Перевірте себе

  1. Чи змінює модель увімкнення посібника з процесу?
  2. Ви перемикаєтеся з одного посібника на інший і назад. Що стається з вашими позначками й контрольними точками?
  3. Як обирати між посібниками?
Показати відповіді
  1. Чи змінює модель увімкнення посібника з процесу?

    Ні. Посібник читає модель і показує, чого ще потребує кожна фаза. Вибір процесу зберігається разом із проєктом і доступний його учасникам, а ⌘Z / Ctrl+Z його скасовує.

  2. Ви перемикаєтеся з одного посібника на інший і назад. Що стається з вашими позначками й контрольними точками?

    Кожен процес зберігає власну поточну фазу, позначені перевірки й контрольні точки, тож повернення до нього приводить вас туди, де ви були.

  3. Як обирати між посібниками?

    Оберіть той, якого дотримується ваша програма чи курс: структура кожного посібника відповідає джерелам, названим під ним, як-от NPR 7123.1 для життєвого циклу NASA. Описи й перевірки — власні тексти Holarch.

Докладніше

Стенограма

Показати стенограму (озвучення і те, що на екрані)

Introduction

Welcome to Track 7, following a process. A model tells you what you have built. A process guide tells you what to do next, and checks the model to show how far each phase has come.

In this chapter you turn on a process guide for the Bike-Share Dock project, and learn how a guide is laid out.

The process guides

Open Plan and Deliver in the rail, then SE Process. Until a project uses a guide, the page explains what a guide does and lists the processes you can follow.

On screen: Plan & Deliver → SE Process.

There are six. The Kossiakoff systems engineering method, ISO/IEC/IEEE 15288, the NASA project life cycle, the DoD acquisition life cycle, the MIL-STD-499B process loop, and the Vee model. Each has a one-line summary.

On screen: The six processes.

Select one to read more about it. The NASA life cycle runs from concept studies to closeout, and each phase ends at a key decision point. The line at the bottom names the sources the guide is based on: here NPR 7123.1 and the NASA Systems Engineering Handbook.

On screen: Select NASA project life cycle; its intro and sources.

Turn on a guide

For this project, choose the Kossiakoff method. It is based on the method described by Kossiakoff and his co-authors in Systems Engineering Principles and Practice. Click Use This Process.

On screen: Select Kossiakoff SE method → Use This Process.

Life cycle, phases and steps

The life cycle appears at the top. Kossiakoff has three stages: concept development, engineering development, and post-development, in eight phases. Each phase shows how much of its work is done, and the first phase, needs analysis, is marked current.

On screen: The life cycle: stages, phases, percentages, Current.

Below it is the phase you are looking at, with its aim: show that a real need exists, and that a system to meet it is feasible.

On screen: Phase card: Needs analysis and its aim.

Then come the four steps of the method, which repeat in every phase: requirements analysis, functional definition, physical definition, and design validation. Each step lists the checks for this phase. The next chapter works through them.

On screen: The four step cards.

Switch guides

A project can switch guides at any time. Choose ISO/IEC/IEEE 15288 in the Process list. Its six life-cycle stages run from concept to retirement, and the technical processes of the standard become the cards, with the technical management processes after them.

On screen: Process ▾ → ISO/IEC/IEEE 15288.

Switch back to the Kossiakoff method. Each guide keeps its own current phase, ticked checks and gates, so switching back brings you to where you were.

On screen: Process ▾ → Kossiakoff SE method.

Recap

Let's recap. You opened the SE Process page, compared the six guides and their sources, turned on the Kossiakoff method, read its life cycle, phases and steps, and switched guides without losing your place.

Next, you work through the checks of the first phase.