Розділи курсів
Навчання · Курс 3. Поведінка та архітектура · Розділ 3.3 з 6
3.3 Розподіл 2:33
Визначте, яка частина станції виконує кожну функцію, і знайдіть, що лишилося.
Показано Holarch 1.27.
Що ви дізнаєтеся
- Налаштувати Матрицю простежуваності дій щодо Asset за зв’язком performed by
- Розподілити функцію на Asset, що її виконує, одним клацанням у матриці
- Використати «Лише прогалини», щоб знайти дії, яких не виконує жоден Asset
- Підтвердити розподіл у розділі «Трасування» елемента
Розподіліть функції Bike-Share Dock і кроки Rent a Bike на частини, що їх виконують, у матриці дій щодо Asset за зв’язком performed by, а потім за допомогою «Лише прогалини» перелічіть те, що досі не має виконавця.
Файли проєкту
- Початковий проєкт (.holarch.json; Керування проєктами → Файли проєкту ▾ → Імпортувати проєкт (.json)…)
- Готовий проєкт (.holarch.json; Керування проєктами → Файли проєкту ▾ → Імпортувати проєкт (.json)…)
Відео відтворюється з holarch.app; див. Політику конфіденційності.
Практика
Виконайте це самостійно в Holarch на демопроєкті CubeSat EO-1.
- Відкрийте свій демопроєкт EO-1 або створіть його: Керування проєктами → Файли проєкту ▾ → Новий демопроєкт → CubeSat (системна інженерія з посібником).
- Відкрийте Верифікація → Матриця простежуваності. Натисніть чип Рядки, задайте для Рядки з значення Ієрархія під кореневою сутністю, виберіть коренем OPS Run Nominal Imaging Pass і натисніть Готово.
- Натисніть чип Стовпці, задайте для Стовпці з значення Усі сутності класу з класом Asset, а для Зв’язок — performed by.
- Позначте Лише прогалини. Лишається OPS.9 Hold Data Onboard разом із кореневою OPS, яку система виконує як ціле.
- Натисніть клітинку на перетині OPS.9 Hold Data Onboard і 1.4 C&DH — частини, що зберігає дані корисного навантаження. Потім виберіть OPS.9 у Базі даних і прочитайте performed by у її розділі Трасування.
- Для покрокового проходження з перевіркою запустіть посібник 6 Physical Architecture and Allocation (Довідка → Посібники).
Завдання виконано, коли «Лише прогалини» більше не показує OPS.9, а її розділ «Трасування» показує performed by 1.4 C&DH.
Перевірте себе
- Чому для «Зв’язок» варто задати performed by, а не «Усі дозволені»?
- Де зберігається розподіл?
- «Лише прогалини» показує рядок. Чи це завжди помилка?
Показати відповіді
Чому для «Зв’язок» варто задати performed by, а не «Усі дозволені»?
Коли вибрано один тип, клацання на порожній клітинці створює саме цей зв’язок. Коли дозволено всі типи, Holarch має запитати, який ви маєте на увазі, якщо підходять кілька.
Де зберігається розподіл?
На самих елементах: як performed by на Action і performs на Asset. Матриця — лише подання цих зв’язків, тож будь-яке інше подання, як-от розділ «Трасування» елемента, показує той самий розподіл.
«Лише прогалини» показує рядок. Чи це завжди помилка?
Ні. Операцію чи функцію верхнього рівня може виконувати система як ціле, тож їй не потрібен один виконавець. Кожному з решти кроків зазвичай потрібен один.
Докладніше
Стенограма
Показати стенограму (озвучення і те, що на екрані)
Introduction
Welcome back. Functions say what the dock does. Its parts, the assets, say what it is. Allocation joins the two.
In this chapter you allocate every function to the part that performs it.
What allocation is
Each function should be performed by a part of the system. A function nothing performs will not happen, and a part with no function is weight with no job. In the model, allocation is one relationship: performed by.
On screen: Card: allocation.
Set up the matrix
A matrix is the quickest way to allocate many functions at once. Open Verification, then Traceability Matrix.
On screen: Verification → Traceability Matrix.
Click Rows, and choose all entities of the class Action. Set Columns to the class Asset the same way. Then set the relationship to performed by, so a click on a cell creates exactly that.
On screen: Rows → class Action; Columns → class Asset; Relationship: performed by.
Allocate the functions
The top-level functions first. Three were allocated in Getting Started, and the matrix marks them: Rent a Bike by the Rental Kiosk, Return a Bike by the Docking Bay, and Charge Bikes by the Charging Unit.
On screen: Existing marks: F.1, F.2, F.3.
Allocate the other two. Take Payment is performed by the Back Office Service: click the cell where its row and that column meet. Report Dock Status is performed by the kiosk, which talks to the back office.
On screen: F.4 × S.4, F.5 × S.2.
The steps of Rent a Bike from the last chapter need performers too. Identify Rider happens at the kiosk, Check Account in the back office, and Unlock Bay in the docking bay.
On screen: F.1.1 × S.2, F.1.2 × S.4, F.1.3 × S.1.
Find the gaps
Now turn on Gaps only. The matrix keeps only the rows and columns with no link: the steps still to allocate, and the top-level function, which is done by the dock as a whole.
On screen: Gaps only.
The rest follow the same way. Show Bay Number and Start Rental belong to the kiosk and the back office, and Relock Bay to the docking bay.
On screen: F.1.4 × S.2, F.1.6 × S.4, F.1.7 × S.1.
On the item
Allocation is stored on the items, not in the matrix. Select Rent a Bike in the Database, and open its Trace section: performed by lists the Rental Kiosk.
On screen: Database → F.1 → Trace.
Recap
Let's recap. You set up a matrix of actions against assets with performed by, allocated the functions and the steps with one click each, and used Gaps only to find what was left.
Next, you define how the dock's parts connect: interfaces.