Capítulos del curso
Formación · Curso 3. Comportamiento y arquitectura · Capítulo 3.3 de 6
3.3 Asignación 2:33
Decidir qué parte del dock realiza cada función y encontrar lo que queda sin asignar.
Muestra Holarch 1.27.
Lo que aprenderá
- Configurar una matriz de trazabilidad de acciones frente a activos con la relación performed by
- Asignar una función al activo que la realiza con un clic en la matriz
- Usar Solo huecos para encontrar las acciones que ningún activo realiza
- Confirmar una asignación en la sección Trazabilidad del elemento
Asigne las funciones del Bike-Share Dock y los pasos de Rent a Bike a las partes que los realizan, en una matriz de acciones frente a activos con la relación performed by, y después use Solo huecos para listar lo que aún no tiene ejecutor.
Archivos de proyecto
- Proyecto inicial (.holarch.json; Gestionar proyectos → Archivos de proyecto ▾ → Importar proyecto (.json)…)
- Proyecto terminado (.holarch.json; Gestionar proyectos → Archivos de proyecto ▾ → Importar proyecto (.json)…)
El vídeo se reproduce desde holarch.app; consulte la Política de privacidad.
Práctica
Hágalo usted mismo en Holarch, en el proyecto de demostración CubeSat EO-1.
- Abra su proyecto de demostración EO-1 o créelo: Gestionar proyectos → Archivos de proyecto ▾ → Nuevo proyecto de demostración → CubeSat (ingeniería de sistemas guiada).
- Abra Verificación → Matriz de trazabilidad. Haga clic en el chip Filas, fije Filas de en Jerarquía bajo un elemento raíz y elija OPS Run Nominal Imaging Pass como raíz; después haga clic en Hecho.
- Haga clic en el chip Columnas, fije Columnas de en Todos los elementos de una clase con la clase Asset y fije Relación en performed by.
- Marque Solo huecos. Queda OPS.9 Hold Data Onboard, junto con la raíz OPS, que el sistema realiza en su conjunto.
- Haga clic en la celda donde OPS.9 Hold Data Onboard se cruza con 1.4 C&DH, la parte que guarda los datos de la carga útil en el almacenamiento. Después seleccione OPS.9 en la Base de datos y lea performed by en su sección Trazabilidad.
- Para un recorrido guiado y comprobado, ejecute el tutorial 6 Physical Architecture and Allocation (Ayuda → Tutoriales).
Habrá terminado cuando Solo huecos ya no liste OPS.9 y su sección Trazabilidad muestre performed by 1.4 C&DH.
Compruebe lo aprendido
- ¿Por qué fijar Relación en performed by en lugar de Todas las permitidas?
- ¿Dónde se guarda una asignación?
- Solo huecos muestra una fila. ¿Es siempre un error?
Mostrar las respuestas
¿Por qué fijar Relación en performed by en lugar de Todas las permitidas?
Con un tipo elegido, un clic en una celda vacía crea exactamente esa relación. Con todos los tipos permitidos, Holarch tiene que preguntar cuál quiere cuando se aplican varios.
¿Dónde se guarda una asignación?
En los elementos, como performed by en la Action y performs en el Asset. La matriz es solo una vista de esos vínculos, de modo que cualquier otra vista, como la sección Trazabilidad del elemento, muestra la misma asignación.
Solo huecos muestra una fila. ¿Es siempre un error?
No. Una operación o función de nivel superior puede realizarla el sistema en su conjunto, por lo que no necesita un único ejecutor. Cada paso restante suele necesitar uno.
Más información
Transcripción
Mostrar la transcripción (narración y lo que aparece en pantalla)
Introduction
Welcome back. Functions say what the dock does. Its parts, the assets, say what it is. Allocation joins the two.
In this chapter you allocate every function to the part that performs it.
What allocation is
Each function should be performed by a part of the system. A function nothing performs will not happen, and a part with no function is weight with no job. In the model, allocation is one relationship: performed by.
On screen: Card: allocation.
Set up the matrix
A matrix is the quickest way to allocate many functions at once. Open Verification, then Traceability Matrix.
On screen: Verification → Traceability Matrix.
Click Rows, and choose all entities of the class Action. Set Columns to the class Asset the same way. Then set the relationship to performed by, so a click on a cell creates exactly that.
On screen: Rows → class Action; Columns → class Asset; Relationship: performed by.
Allocate the functions
The top-level functions first. Three were allocated in Getting Started, and the matrix marks them: Rent a Bike by the Rental Kiosk, Return a Bike by the Docking Bay, and Charge Bikes by the Charging Unit.
On screen: Existing marks: F.1, F.2, F.3.
Allocate the other two. Take Payment is performed by the Back Office Service: click the cell where its row and that column meet. Report Dock Status is performed by the kiosk, which talks to the back office.
On screen: F.4 × S.4, F.5 × S.2.
The steps of Rent a Bike from the last chapter need performers too. Identify Rider happens at the kiosk, Check Account in the back office, and Unlock Bay in the docking bay.
On screen: F.1.1 × S.2, F.1.2 × S.4, F.1.3 × S.1.
Find the gaps
Now turn on Gaps only. The matrix keeps only the rows and columns with no link: the steps still to allocate, and the top-level function, which is done by the dock as a whole.
On screen: Gaps only.
The rest follow the same way. Show Bay Number and Start Rental belong to the kiosk and the back office, and Relock Bay to the docking bay.
On screen: F.1.4 × S.2, F.1.6 × S.4, F.1.7 × S.1.
On the item
Allocation is stored on the items, not in the matrix. Select Rent a Bike in the Database, and open its Trace section: performed by lists the Rental Kiosk.
On screen: Database → F.1 → Trace.
Recap
Let's recap. You set up a matrix of actions against assets with performed by, allocated the functions and the steps with one click each, and used Gaps only to find what was left.
Next, you define how the dock's parts connect: interfaces.