Chapitres du cours
Formation · Parcours 3. Comportement et architecture · Chapitre 3.3 sur 6
3.3 Allocation 2:33
Déterminer quelle partie de la borne réalise chaque fonction, et trouver ce qui reste.
Montre Holarch 1.27.
Ce que vous allez apprendre
- Configurer une matrice de traçabilité des actions par rapport aux assets avec la relation performed by
- Allouer une fonction à l'asset qui la réalise d'un seul clic dans la matrice
- Utiliser Lacunes uniquement pour trouver les actions qu'aucun asset ne réalise
- Confirmer une allocation dans la section Traçabilité de l'élément
Allouez les fonctions du Bike-Share Dock et les étapes de Rent a Bike aux parties qui les réalisent, dans une matrice des actions par rapport aux assets avec la relation performed by, puis utilisez Lacunes uniquement pour lister ce qui n'a toujours pas d'exécutant.
Fichiers de projet
- Projet de départ (.holarch.json ; Gérer les projets → Fichiers de projet ▾ → Importer un projet (.json)…)
- Projet terminé (.holarch.json ; Gérer les projets → Fichiers de projet ▾ → Importer un projet (.json)…)
La vidéo est diffusée depuis holarch.app ; voir la Politique de confidentialité.
Pratique
Faites-le vous-même dans Holarch, sur le projet de démonstration CubeSat EO-1.
- Ouvrez votre projet de démonstration EO-1, ou créez-le : Gérer les projets → Fichiers de projet ▾ → Nouveau projet de démonstration → CubeSat (ingénierie système guidée).
- Ouvrez Vérification → Matrice de traçabilité. Cliquez sur la puce Lignes, réglez Lignes issues de sur Hiérarchie sous une entité racine et choisissez OPS Run Nominal Imaging Pass comme racine, puis cliquez sur Terminé.
- Cliquez sur la puce Colonnes, réglez Colonnes issues de sur Toutes les entités d'une classe avec la classe Asset, et réglez Relation sur performed by.
- Cochez Lacunes uniquement. Il reste OPS.9 Hold Data Onboard, avec la racine OPS, que le système réalise dans son ensemble.
- Cliquez sur la cellule où OPS.9 Hold Data Onboard croise 1.4 C&DH, la partie qui conserve les données de la charge utile en mémoire. Sélectionnez ensuite OPS.9 dans la Base de données et lisez performed by dans sa section Traçabilité.
- Pour un parcours guidé et contrôlé, lancez le tutoriel 6 Physical Architecture and Allocation (Aide → Tutoriels).
C'est terminé quand Lacunes uniquement ne liste plus OPS.9 et que sa section Traçabilité indique performed by 1.4 C&DH.
Vérifiez vos connaissances
- Pourquoi régler Relation sur performed by plutôt que sur Toutes celles autorisées ?
- Où une allocation est-elle stockée ?
- Lacunes uniquement affiche une ligne. Est-ce toujours une erreur ?
Afficher les réponses
Pourquoi régler Relation sur performed by plutôt que sur Toutes celles autorisées ?
Avec un seul type choisi, un clic sur une cellule vide crée exactement cette relation. Avec tous les types autorisés, Holarch doit demander lequel vous voulez dire lorsque plusieurs s'appliquent.
Où une allocation est-elle stockée ?
Sur les éléments, en tant que performed by sur l'Action et performs sur l'Asset. La matrice n'est qu'une vue de ces liens : toute autre vue, comme la section Traçabilité de l'élément, montre la même allocation.
Lacunes uniquement affiche une ligne. Est-ce toujours une erreur ?
Non. Une opération ou une fonction de premier niveau peut être réalisée par le système dans son ensemble ; elle n'a donc pas besoin d'un exécutant unique. Chaque étape restante en a généralement besoin d'un.
Pour aller plus loin
Transcription
Afficher la transcription (narration et contenu de l'écran)
Introduction
Welcome back. Functions say what the dock does. Its parts, the assets, say what it is. Allocation joins the two.
In this chapter you allocate every function to the part that performs it.
What allocation is
Each function should be performed by a part of the system. A function nothing performs will not happen, and a part with no function is weight with no job. In the model, allocation is one relationship: performed by.
On screen: Card: allocation.
Set up the matrix
A matrix is the quickest way to allocate many functions at once. Open Verification, then Traceability Matrix.
On screen: Verification → Traceability Matrix.
Click Rows, and choose all entities of the class Action. Set Columns to the class Asset the same way. Then set the relationship to performed by, so a click on a cell creates exactly that.
On screen: Rows → class Action; Columns → class Asset; Relationship: performed by.
Allocate the functions
The top-level functions first. Three were allocated in Getting Started, and the matrix marks them: Rent a Bike by the Rental Kiosk, Return a Bike by the Docking Bay, and Charge Bikes by the Charging Unit.
On screen: Existing marks: F.1, F.2, F.3.
Allocate the other two. Take Payment is performed by the Back Office Service: click the cell where its row and that column meet. Report Dock Status is performed by the kiosk, which talks to the back office.
On screen: F.4 × S.4, F.5 × S.2.
The steps of Rent a Bike from the last chapter need performers too. Identify Rider happens at the kiosk, Check Account in the back office, and Unlock Bay in the docking bay.
On screen: F.1.1 × S.2, F.1.2 × S.4, F.1.3 × S.1.
Find the gaps
Now turn on Gaps only. The matrix keeps only the rows and columns with no link: the steps still to allocate, and the top-level function, which is done by the dock as a whole.
On screen: Gaps only.
The rest follow the same way. Show Bay Number and Start Rental belong to the kiosk and the back office, and Relock Bay to the docking bay.
On screen: F.1.4 × S.2, F.1.6 × S.4, F.1.7 × S.1.
On the item
Allocation is stored on the items, not in the matrix. Select Rent a Bike in the Database, and open its Trace section: performed by lists the Rental Kiosk.
On screen: Database → F.1 → Trace.
Recap
Let's recap. You set up a matrix of actions against assets with performed by, allocated the functions and the steps with one click each, and used Gaps only to find what was left.
Next, you define how the dock's parts connect: interfaces.