Holarch
コースのチャプター

トレーニング · トラック 3. 振る舞いとアーキテクチャ · チャプター 3.3(全 6 チャプター)

3.3 割り当て 2:33

ドックのどの部分が各機能を実行するかを決め、残っているものを見つけます。

Holarch 1.27 の画面です。

学習内容

  • performed by 関係を使って、アクションとアセットのトレーサビリティマトリックスを設定する
  • マトリックスでワンクリックして、機能をそれを実行するアセットに割り当てる
  • 「ギャップのみ」を使って、どのアセットも実行していないアクションを見つける
  • 項目のトレースセクションで割り当てを確認する

Bike-Share Dock の機能と Rent a Bike のステップを、それらを実行する部品に割り当てます。performed by 関係を使ったアクションとアセットのマトリックスで行い、その後「ギャップのみ」で実行者がまだいないものを一覧表示します。

プロジェクトファイル

  • 開始時のプロジェクト (.holarch.json。プロジェクトを管理 → プロジェクトファイル ▾ → プロジェクトをインポート (.json)…)
  • 完成したプロジェクト (.holarch.json。プロジェクトを管理 → プロジェクトファイル ▾ → プロジェクトをインポート (.json)…)

動画は holarch.app から再生されます。プライバシーポリシーをご覧ください。

演習

CubeSat EO-1 デモプロジェクトを使って、Holarch で実際に操作します。

  1. EO-1 デモプロジェクトを開くか、作成します:プロジェクトを管理 → プロジェクトファイル ▾ → 新しいデモプロジェクト → CubeSat(ガイド付きシステムズエンジニアリング)。
  2. 検証 → トレーサビリティマトリックスを開きます。行チップをクリックし、行の取得元をルート項目以下の階層に設定してルートに OPS Run Nominal Imaging Pass を選び、完了をクリックします。
  3. 列チップをクリックし、列の取得元をクラスのすべてのエンティティにしてクラス Asset を選び、関係を performed by に設定します。
  4. ギャップのみにチェックを入れます。OPS.9 Hold Data Onboard が残ります。ルートの OPS はシステム全体で実行されるものとして一緒に残ります。
  5. OPS.9 Hold Data Onboard と 1.4 C&DH(ペイロードデータをストレージに保持する部品)が交わるセルをクリックします。次に、データベースで OPS.9 を選択し、そのトレースセクションの performed by を確認します。
  6. チェック付きのウォークスルーを行うには、チュートリアル 6「物理アーキテクチャと割り当て」を実行します(ヘルプ → チュートリアル)。

「ギャップのみ」に OPS.9 が表示されなくなり、そのトレースセクションに performed by 1.4 C&DH が表示されれば完了です。

確認問題

  1. 関係を「すべて許可」ではなく performed by に設定するのはなぜですか?
  2. 割り当てはどこに保存されますか?
  3. 「ギャップのみ」で行が表示されます。これは常にエラーですか?
解答を表示
  1. 関係を「すべて許可」ではなく performed by に設定するのはなぜですか?

    1 種類を選択している場合、空のセルをクリックするとその関係がそのまま作成されます。許可されたすべての種類が対象の場合、複数が該当すると Holarch はどれを意図しているかを確認する必要があります。

  2. 割り当てはどこに保存されますか?

    項目上に保存されます。Action では performed by、Asset では performs として保存されます。マトリックスはそれらのリンクのビューにすぎないため、項目のトレースセクションなど他のどのビューにも同じ割り当てが表示されます。

  3. 「ギャップのみ」で行が表示されます。これは常にエラーですか?

    いいえ。最上位の運用や機能はシステム全体で行われることがあるため、単一の実行者は不要です。残りの各ステップには通常 1 つ必要です。

関連資料

トランスクリプト

トランスクリプトを表示 (ナレーションと画面の内容)

Introduction

Welcome back. Functions say what the dock does. Its parts, the assets, say what it is. Allocation joins the two.

In this chapter you allocate every function to the part that performs it.

What allocation is

Each function should be performed by a part of the system. A function nothing performs will not happen, and a part with no function is weight with no job. In the model, allocation is one relationship: performed by.

On screen: Card: allocation.

Set up the matrix

A matrix is the quickest way to allocate many functions at once. Open Verification, then Traceability Matrix.

On screen: Verification → Traceability Matrix.

Click Rows, and choose all entities of the class Action. Set Columns to the class Asset the same way. Then set the relationship to performed by, so a click on a cell creates exactly that.

On screen: Rows → class Action; Columns → class Asset; Relationship: performed by.

Allocate the functions

The top-level functions first. Three were allocated in Getting Started, and the matrix marks them: Rent a Bike by the Rental Kiosk, Return a Bike by the Docking Bay, and Charge Bikes by the Charging Unit.

On screen: Existing marks: F.1, F.2, F.3.

Allocate the other two. Take Payment is performed by the Back Office Service: click the cell where its row and that column meet. Report Dock Status is performed by the kiosk, which talks to the back office.

On screen: F.4 × S.4, F.5 × S.2.

The steps of Rent a Bike from the last chapter need performers too. Identify Rider happens at the kiosk, Check Account in the back office, and Unlock Bay in the docking bay.

On screen: F.1.1 × S.2, F.1.2 × S.4, F.1.3 × S.1.

Find the gaps

Now turn on Gaps only. The matrix keeps only the rows and columns with no link: the steps still to allocate, and the top-level function, which is done by the dock as a whole.

On screen: Gaps only.

The rest follow the same way. Show Bay Number and Start Rental belong to the kiosk and the back office, and Relock Bay to the docking bay.

On screen: F.1.4 × S.2, F.1.6 × S.4, F.1.7 × S.1.

On the item

Allocation is stored on the items, not in the matrix. Select Rent a Bike in the Database, and open its Trace section: performed by lists the Rental Kiosk.

On screen: Database → F.1 → Trace.

Recap

Let's recap. You set up a matrix of actions against assets with performed by, allocated the functions and the steps with one click each, and used Gaps only to find what was left.

Next, you define how the dock's parts connect: interfaces.