Holarch
Kurskapitel

Schulung · Reihe 3. Verhalten und Architektur · Kapitel 3.3 von 6

3.3 Zuordnung 2:33

Festlegen, welcher Teil der Station jede Funktion ausführt, und finden, was übrig bleibt.

Zeigt Holarch 1.27.

← 3.2 Action-Diagramme · Alle Kapitel · 3.4 Schnittstellen →

Das lernen Sie

  • Eine Nachverfolgbarkeitsmatrix von Actions gegen Assets mit der Beziehung performed by einrichten
  • Eine Funktion mit einem Klick in der Matrix dem Asset zuordnen, das sie ausführt
  • Mit „Nur Lücken“ die Actions finden, die kein Asset ausführt
  • Eine Zuordnung im Abschnitt „Nachverfolgung“ des Elements bestätigen

Ordnen Sie die Funktionen des Bike-Share Dock und die Schritte von Rent a Bike den Teilen zu, die sie ausführen, in einer Matrix von Actions gegen Assets mit der Beziehung performed by, und listen Sie dann mit „Nur Lücken“ auf, was noch keinen Ausführenden hat.

Projektdateien

  • Startprojekt (.holarch.json; Projekte verwalten → Projektdateien ▾ → Projekt importieren (.json)…)
  • Fertiges Projekt (.holarch.json; Projekte verwalten → Projektdateien ▾ → Projekt importieren (.json)…)

Das Video wird von holarch.app abgespielt; siehe Datenschutzerklärung.

Übung

Führen Sie dies selbst in Holarch durch, am Demoprojekt CubeSat EO-1.

  1. Öffnen Sie Ihr EO-1-Demoprojekt oder erstellen Sie es: Projekte verwalten → Projektdateien ▾ → Neues Demoprojekt → CubeSat (Geführtes Systems Engineering).
  2. Öffnen Sie Verifikation → Nachverfolgbarkeitsmatrix. Klicken Sie auf den Chip Zeilen, setzen Sie Zeilen aus auf Hierarchie unter einer Wurzelentität, wählen Sie OPS Run Nominal Imaging Pass als Wurzel und klicken Sie dann auf Fertig.
  3. Klicken Sie auf den Chip Spalten, setzen Sie Spalten aus auf Alle Entitäten einer Klasse mit der Klasse Asset und setzen Sie Beziehung auf performed by.
  4. Aktivieren Sie Nur Lücken. Übrig bleibt OPS.9 Hold Data Onboard, zusammen mit der Wurzel OPS, die das System als Ganzes ausführt.
  5. Klicken Sie auf die Zelle, in der sich OPS.9 Hold Data Onboard und 1.4 C&DH treffen, der Teil, der Nutzlastdaten im Speicher hält. Wählen Sie dann OPS.9 in der Datenbank aus und lesen Sie performed by in seinem Abschnitt Nachverfolgung.
  6. Für eine geprüfte Schritt-für-Schritt-Anleitung führen Sie Tutorial 6 Physical Architecture and Allocation aus (Hilfe → Tutorials).

Sie sind fertig, wenn „Nur Lücken“ OPS.9 nicht mehr auflistet und sein Abschnitt „Nachverfolgung“ performed by 1.4 C&DH zeigt.

Selbsttest

  1. Warum wird „Beziehung“ auf performed by statt auf „Alle erlaubten“ gesetzt?
  2. Wo wird eine Zuordnung gespeichert?
  3. „Nur Lücken“ zeigt eine Zeile. Ist das immer ein Fehler?
Antworten anzeigen
  1. Warum wird „Beziehung“ auf performed by statt auf „Alle erlaubten“ gesetzt?

    Ist ein Typ gewählt, erstellt ein Klick auf eine leere Zelle genau diese Beziehung. Mit allen erlaubten Typen muss Holarch fragen, welchen Sie meinen, wenn mehrere passen.

  2. Wo wird eine Zuordnung gespeichert?

    An den Elementen, als performed by an der Action und performs am Asset. Die Matrix ist nur eine Ansicht dieser Links, daher zeigt jede andere Ansicht, etwa der Abschnitt „Nachverfolgung“ des Elements, dieselbe Zuordnung.

  3. „Nur Lücken“ zeigt eine Zeile. Ist das immer ein Fehler?

    Nein. Eine Operation oder Funktion der obersten Ebene kann vom System als Ganzes ausgeführt werden und braucht daher keinen einzelnen Ausführenden. Jeder verbleibende Schritt braucht in der Regel einen.

Weiterlesen

Transkript

Transkript anzeigen (Erzählung und Bildschirminhalt)

Introduction

Welcome back. Functions say what the dock does. Its parts, the assets, say what it is. Allocation joins the two.

In this chapter you allocate every function to the part that performs it.

What allocation is

Each function should be performed by a part of the system. A function nothing performs will not happen, and a part with no function is weight with no job. In the model, allocation is one relationship: performed by.

On screen: Card: allocation.

Set up the matrix

A matrix is the quickest way to allocate many functions at once. Open Verification, then Traceability Matrix.

On screen: Verification → Traceability Matrix.

Click Rows, and choose all entities of the class Action. Set Columns to the class Asset the same way. Then set the relationship to performed by, so a click on a cell creates exactly that.

On screen: Rows → class Action; Columns → class Asset; Relationship: performed by.

Allocate the functions

The top-level functions first. Three were allocated in Getting Started, and the matrix marks them: Rent a Bike by the Rental Kiosk, Return a Bike by the Docking Bay, and Charge Bikes by the Charging Unit.

On screen: Existing marks: F.1, F.2, F.3.

Allocate the other two. Take Payment is performed by the Back Office Service: click the cell where its row and that column meet. Report Dock Status is performed by the kiosk, which talks to the back office.

On screen: F.4 × S.4, F.5 × S.2.

The steps of Rent a Bike from the last chapter need performers too. Identify Rider happens at the kiosk, Check Account in the back office, and Unlock Bay in the docking bay.

On screen: F.1.1 × S.2, F.1.2 × S.4, F.1.3 × S.1.

Find the gaps

Now turn on Gaps only. The matrix keeps only the rows and columns with no link: the steps still to allocate, and the top-level function, which is done by the dock as a whole.

On screen: Gaps only.

The rest follow the same way. Show Bay Number and Start Rental belong to the kiosk and the back office, and Relock Bay to the docking bay.

On screen: F.1.4 × S.2, F.1.6 × S.4, F.1.7 × S.1.

On the item

Allocation is stored on the items, not in the matrix. Select Rent a Bike in the Database, and open its Trace section: performed by lists the Rental Kiosk.

On screen: Database → F.1 → Trace.

Recap

Let's recap. You set up a matrix of actions against assets with performed by, allocated the functions and the steps with one click each, and used Gaps only to find what was left.

Next, you define how the dock's parts connect: interfaces.