Holarch
Rozdziały kursu

Szkolenia · Ścieżka 13. Tablice · Rozdział 13.4 z 4

13.4 Dane na żywo, elementy modelu i cliparty 3:17

Wklejanie komórek jako tabeli na żywo, łączenie wykresu z komórkami arkusza kalkulacyjnego, łączenie i konwertowanie kształtów na elementy modelu oraz dodawanie clipartów.

Pokazuje Holarch 2.35.

← 13.3 Wykresy · Wszystkie rozdziały

Czego się nauczysz

  • Wklejanie komórek z Excel jako tabeli dynamicznego arkusza kalkulacyjnego
  • Łączenie wykresu z zakresem arkusza kalkulacyjnego w Wybierz dane
  • Zmiana wartości w arkuszu kalkulacyjnym i obserwowanie, jak plansza za nią podąża
  • Łączenie kształtu z elementem modelu i konwertowanie kształtu na nowy element
  • Wyszukiwanie, oznaczanie gwiazdką i wstawianie clipartów

Dokończ tablicę koncepcji stacji Bike-Share Dock: wklej komórki stanu stacji z Excel jako tabelę dynamicznego arkusza kalkulacyjnego, połącz wykres słupkowy z tymi samymi komórkami w Wybierz dane, zmień liczbę w arkuszu kalkulacyjnym i zobacz, jak tabela i wykres za nią podążają, połącz kształt z elementem Asset modelu, przekonwertuj inny kształt na nowy element Asset i dodaj obraz z panelu Clipart.

Pliki projektu

  • Projekt początkowy (.holarch.json; Zarządzaj projektami → Pliki projektu ▾ → Importuj projekt (.json)…)
  • Projekt ukończony (.holarch.json; Zarządzaj projektami → Pliki projektu ▾ → Importuj projekt (.json)…)

Film jest odtwarzany z holarch.app; zobacz Politykę prywatności.

Ćwiczenie

Wykonaj to samodzielnie w Holarch na projekcie Bike-Share Dock.

  1. Otwórz plik początkowy rozdziału i tablicę Dock Concept. Kliknij + na pasku plansz.
  2. W Excel skopiuj mały blok komórek z wierszem nagłówka. Kliknij planszę, naciśnij ⌘V / Ctrl+V (lub Ctrl+V), wybierz Dynamiczny arkusz kalkulacyjny i kliknij Wklej.
  3. Wstaw wykres Słupkowy, otwórz Wybierz dane… → Połącz z zakresem arkusza kalkulacyjnego…, wybierz nowy arkusz kalkulacyjny, wpisz zakres i kliknij Łącze, a następnie OK.
  4. Kliknij dwukrotnie tabelę, zmień jedną liczbę w arkuszu kalkulacyjnym i wróć do planszy za pomocą jej karty edytora.
  5. Na planszy 1 zaznacz kształt Rental Kiosk, kliknij Powiąż z… i wybierz element Asset Rental Kiosk. Zaznacz Rider, kliknij Konwertuj na model…, wybierz Asset i kliknij Konwertuj.
  6. Otwórz Clipart, wyszukaj bicycle, oznacz gwiazdką jeden obraz i kliknij go, aby go wstawić.

Gotowe, gdy tabela i wykres pokazują zmienioną liczbę, oba kształty mają plakietkę klasy, a na planszy jest obraz roweru.

Sprawdź się

  1. Czym różni się wklejenie komórek jako Wykres od wklejenia jako Dynamiczny arkusz kalkulacyjny?
  2. Jak wykres podąża za komórkami arkusza kalkulacyjnego?
  3. Czym różni się Powiąż z… od Konwertuj na model…?
Pokaż odpowiedzi
  1. Czym różni się wklejenie komórek jako Wykres od wklejenia jako Dynamiczny arkusz kalkulacyjny?

    Wykres przechowuje kopię wartości i się nie zmienia. Dynamiczny arkusz kalkulacyjny tworzy arkusz kalkulacyjny z komórkami i pokazuje je jako tabelę na żywo, która zmienia się razem z nimi.

  2. Jak wykres podąża za komórkami arkusza kalkulacyjnego?

    Połącz go w Wybierz dane za pomocą Połącz z zakresem arkusza kalkulacyjnego…; wykres korzysta wtedy z tego zakresu.

  3. Czym różni się Powiąż z… od Konwertuj na model…?

    Powiąż z… łączy kształt z elementem, który już istnieje. Konwertuj na model… tworzy z kształtu nowy element, nazwany według jego tekstu, i łączy z nim kształt.

Więcej informacji

Transkrypcja

Pokaż transkrypcję (narracja i to, co widać na ekranie)

Introduction

Chapter four: live data, model items and clipart. A board can show figures that stay current, stand for items of the model, and use ready-made pictures.

In this chapter you finish the dock concept board.

Live data from pasted cells

Live data gets a board of its own. Click the plus in the Boards strip.

On screen: Boards strip → +.

The dock status is kept in a workbook: each station's docks, and the bikes available now. In Excel, select the cells and copy them.

On screen: Dock Status.xlsx.

Click the board, and press Command V, or Control V. Holarch asks how to paste the cells. Choose Live spreadsheet, and click Paste.

On screen: Click the board → ⌘V / Ctrl+V → Live spreadsheet → Paste.

Holarch creates a spreadsheet that holds the cells, and shows them on the board as a live table. Drag the table to the left.

On screen: The live table → drag it left.

A chart can follow the same cells. In the Tables and Charts panel, click Bar, and drag the chart beside the table.

On screen: Tables and Charts → Bar → drag it right.

Open Select Data, and click Link to Spreadsheet Range. Choose the new spreadsheet, type A1 to C5 as the range, and click Link.

On screen: Select Data… → Link to Spreadsheet Range… → A1:C5 → Link.

Select Data now names the linked range, and the chart shows the stations' docks and bikes. Click OK.

On screen: Linked range → OK.

The board follows the source

Now change a figure at its source. Double-click the table: its spreadsheet opens, with the cells selected.

On screen: Double-click the table → the spreadsheet.

Two more bikes are back at Riverside. In the Name Box, type C3 and press Enter, then type 6 in the formula bar, and press Enter.

On screen: Name Box C3 → formula bar 6 → Enter.

Go back to the board with its editor tab. The table and the chart already show six bikes at Riverside.

On screen: Editor tab → the board; the new value.

Model items on the board

Shapes on a board can stand for items of the model. Open Board 1, and select the rental kiosk.

On screen: Board 1 → select Rental Kiosk.

In the inspector's Model section, click Link to, search for Rental Kiosk, and choose the asset.

On screen: Link to… → Rental Kiosk (Asset).

The shape shows a badge, and the inspector names the linked asset. Click its name to see the asset's details in the side panel.

On screen: Badge; Model section → the asset.

A shape can also become a new item. Select the rider, and click Convert to Model. Choose Asset as the class, keep the name, and click Convert.

On screen: Rider → Convert to Model… → Asset → Convert.

The rider is now an asset of the model, linked to its shape, and listed in the Database with the other assets.

On screen: The linked Rider.

Clipart

Last, the Clipart panel: thousands of pictures and icons for concept graphics. Open it, and search for bicycle.

On screen: Clipart panel → search bicycle.

The star on a picture adds it to your favorites. Click a picture to add it to the board, and drag it below the rider.

On screen: Star → click the picture → drag it beside the rider.

Recap

To recap: paste cells as a live table, link charts to spreadsheet ranges in Select Data, link or convert shapes in the Model section, and add pictures from the Clipart panel.

That completes the whiteboard track. You can now sketch a concept with shapes and lines, chart its figures, keep them live, and tie the board to the model.

On screen: Track complete card, then end card.