Holarch
Capitoli del corso

Formazione · Percorso 13. Lavagne · Capitolo 13.4 di 4

13.4 Dati in tempo reale, elementi del modello e clipart 3:17

Incollare celle come tabella in tempo reale, collegare un grafico a celle di un foglio di calcolo, collegare e convertire forme in elementi del modello e aggiungere clipart.

Mostra Holarch 2.35.

← 13.3 Grafici · Tutti i capitoli

Che cosa si impara

  • Incollare celle da Excel come tabella di un foglio di calcolo live
  • Collegare un grafico a un intervallo di un foglio di calcolo in Seleziona dati
  • Cambiare un valore nel foglio di calcolo e vedere la tavola aggiornarsi
  • Collegare una forma a un elemento del modello e convertire una forma in un nuovo elemento
  • Trovare, contrassegnare con una stella e inserire clipart

Completare la lavagna di concept della Bike-Share Dock: incollare da Excel le celle dello stato della stazione come tabella di un foglio di calcolo live, collegare un grafico a barre alle stesse celle con Seleziona dati, cambiare un valore nel foglio di calcolo e vedere la tabella e il grafico aggiornarsi, collegare una forma a un asset del modello e convertire un’altra forma in un nuovo asset, e aggiungere un’immagine dal pannello Clipart.

File di progetto

  • Progetto iniziale (.holarch.json; Gestisci progetti → File di progetto ▾ → Importa progetto (.json)…)
  • Progetto completato (.holarch.json; Gestisci progetti → File di progetto ▾ → Importa progetto (.json)…)

Il video viene riprodotto da holarch.app; vedere l’Informativa sulla privacy.

Esercitazione

Provare in prima persona in Holarch, su Bike-Share Dock.

  1. Aprire il file iniziale del capitolo e la lavagna Dock Concept. Fare clic su + nella striscia delle tavole.
  2. In Excel, copiare un piccolo blocco di celle con una riga di intestazione. Fare clic sulla tavola, premere ⌘V / Ctrl+V (o Ctrl+V), scegliere Foglio di calcolo live e fare clic su Incolla.
  3. Inserire un grafico a Barre, aprire Seleziona dati… → Collega a un intervallo del foglio di calcolo…, scegliere il nuovo foglio di calcolo, digitare l’intervallo e fare clic su Collega, poi su OK.
  4. Fare doppio clic sulla tabella, cambiare un numero nel foglio di calcolo e tornare alla tavola con la sua scheda dell’editor.
  5. Sulla tavola 1, selezionare la forma Rental Kiosk, fare clic su Collega a… e scegliere l’asset Rental Kiosk. Selezionare Rider, fare clic su Converti in modello…, scegliere Asset e fare clic su Converti.
  6. Aprire Clipart, cercare bicycle, aggiungere una stella a un’immagine e fare clic su di essa per inserirla.

L’esercizio è completato quando la tabella e il grafico mostrano il numero modificato, entrambe le forme portano un badge di classe e sulla tavola c’è l’immagine di una bicicletta.

Verifica

  1. Qual è la differenza tra incollare le celle come Grafico e come Foglio di calcolo live?
  2. Come fa un grafico a seguire le celle di un foglio di calcolo?
  3. Qual è la differenza tra Collega a… e Converti in modello…?
Mostra le risposte
  1. Qual è la differenza tra incollare le celle come Grafico e come Foglio di calcolo live?

    Un Grafico conserva una copia dei valori e non cambia. Un Foglio di calcolo live crea un foglio di calcolo con le celle e le mostra come una tabella in tempo reale che cambia con esse.

  2. Come fa un grafico a seguire le celle di un foglio di calcolo?

    Collegarlo in Seleziona dati con Collega a un intervallo del foglio di calcolo…; il grafico attinge quindi a quell’intervallo.

  3. Qual è la differenza tra Collega a… e Converti in modello…?

    Collega a… lega la forma a un elemento già esistente. Converti in modello… crea dalla forma un nuovo elemento, con il nome del suo testo, e lo collega.

Per saperne di più

Trascrizione

Mostra la trascrizione (narrazione e contenuto dello schermo)

Introduction

Chapter four: live data, model items and clipart. A board can show figures that stay current, stand for items of the model, and use ready-made pictures.

In this chapter you finish the dock concept board.

Live data from pasted cells

Live data gets a board of its own. Click the plus in the Boards strip.

On screen: Boards strip → +.

The dock status is kept in a workbook: each station's docks, and the bikes available now. In Excel, select the cells and copy them.

On screen: Dock Status.xlsx.

Click the board, and press Command V, or Control V. Holarch asks how to paste the cells. Choose Live spreadsheet, and click Paste.

On screen: Click the board → ⌘V / Ctrl+V → Live spreadsheet → Paste.

Holarch creates a spreadsheet that holds the cells, and shows them on the board as a live table. Drag the table to the left.

On screen: The live table → drag it left.

A chart can follow the same cells. In the Tables and Charts panel, click Bar, and drag the chart beside the table.

On screen: Tables and Charts → Bar → drag it right.

Open Select Data, and click Link to Spreadsheet Range. Choose the new spreadsheet, type A1 to C5 as the range, and click Link.

On screen: Select Data… → Link to Spreadsheet Range… → A1:C5 → Link.

Select Data now names the linked range, and the chart shows the stations' docks and bikes. Click OK.

On screen: Linked range → OK.

The board follows the source

Now change a figure at its source. Double-click the table: its spreadsheet opens, with the cells selected.

On screen: Double-click the table → the spreadsheet.

Two more bikes are back at Riverside. In the Name Box, type C3 and press Enter, then type 6 in the formula bar, and press Enter.

On screen: Name Box C3 → formula bar 6 → Enter.

Go back to the board with its editor tab. The table and the chart already show six bikes at Riverside.

On screen: Editor tab → the board; the new value.

Model items on the board

Shapes on a board can stand for items of the model. Open Board 1, and select the rental kiosk.

On screen: Board 1 → select Rental Kiosk.

In the inspector's Model section, click Link to, search for Rental Kiosk, and choose the asset.

On screen: Link to… → Rental Kiosk (Asset).

The shape shows a badge, and the inspector names the linked asset. Click its name to see the asset's details in the side panel.

On screen: Badge; Model section → the asset.

A shape can also become a new item. Select the rider, and click Convert to Model. Choose Asset as the class, keep the name, and click Convert.

On screen: Rider → Convert to Model… → Asset → Convert.

The rider is now an asset of the model, linked to its shape, and listed in the Database with the other assets.

On screen: The linked Rider.

Clipart

Last, the Clipart panel: thousands of pictures and icons for concept graphics. Open it, and search for bicycle.

On screen: Clipart panel → search bicycle.

The star on a picture adds it to your favorites. Click a picture to add it to the board, and drag it below the rider.

On screen: Star → click the picture → drag it beside the rider.

Recap

To recap: paste cells as a live table, link charts to spreadsheet ranges in Select Data, link or convert shapes in the Model section, and add pictures from the Clipart panel.

That completes the whiteboard track. You can now sketch a concept with shapes and lines, chart its figures, keep them live, and tie the board to the model.

On screen: Track complete card, then end card.