Главы курса
Обучение · Курс 13. Доски · Глава 13.4 из 4
13.4 Живые данные, элементы модели и клипарт 3:17
Вставляйте ячейки как живую таблицу, связывайте график с ячейками электронной таблицы, связывайте фигуры с элементами модели и преобразуйте их в элементы, добавляйте клипарт.
Показан Holarch 2.35.
Чему вы научитесь
- Вставлять ячейки из Excel как живую таблицу электронной таблицы
- Связывать график с диапазоном электронной таблицы в окне «Выбрать данные»
- Менять значение в электронной таблице и видеть, как доска следует за ним
- Связывать фигуру с элементом модели и преобразовывать фигуру в новый элемент
- Находить, отмечать звёздочкой и вставлять клипарт
Завершите доску концепции станции Bike-Share Dock: вставьте ячейки состояния доков из Excel как живую таблицу электронной таблицы, свяжите линейчатый график с теми же ячейками через «Выбрать данные», измените показатель в электронной таблице и посмотрите, как таблица и график следуют за ним, свяжите фигуру с Asset модели, преобразуйте другую фигуру в новый Asset и добавьте картинку с панели «Клипарт».
Файлы проектов
- Начальный проект (.holarch.json; Управление проектами → Файлы проекта ▾ → Импортировать проект (.json)…)
- Готовый проект (.holarch.json; Управление проектами → Файлы проекта ▾ → Импортировать проект (.json)…)
Видео воспроизводится с holarch.app; см. Политику конфиденциальности.
Практика
Выполните это сами в Holarch на Bike-Share Dock.
- Откройте начальный файл главы и доску Dock Concept. Нажмите + в полосе листов.
- В Excel скопируйте небольшой блок ячеек со строкой заголовков. Щёлкните лист доски, нажмите ⌘V / Ctrl+V (или Ctrl+V), выберите Динамическая электронная таблица и нажмите Вставить.
- Вставьте график Линейчатая, откройте Выбрать данные… → Связать с диапазоном электронной таблицы…, выберите новую электронную таблицу, введите диапазон и нажмите Связать, затем ОК.
- Дважды щёлкните таблицу, измените одно число в электронной таблице и вернитесь на доску через вкладку её редактора.
- На листе Board 1 выделите фигуру Rental Kiosk, нажмите Связать с… и выберите Asset Rental Kiosk. Выделите Rider, нажмите Преобразовать в модель…, выберите Asset и нажмите Преобразовать.
- Откройте Клипарт, найдите
bicycle, отметьте звёздочкой одну картинку и щёлкните её, чтобы вставить.
Готово, когда таблица и график показывают изменённое вами число, обе фигуры несут значок класса, а на листе есть картинка велосипеда.
Проверьте себя
- Чем вставка ячеек как графика отличается от вставки как динамической электронной таблицы?
- Как график следует за ячейками электронной таблицы?
- Чем «Связать с…» отличается от «Преобразовать в модель…»?
Показать ответы
Чем вставка ячеек как графика отличается от вставки как динамической электронной таблицы?
График хранит копию значений и не меняется. Динамическая электронная таблица создаёт электронную таблицу с этими ячейками и показывает их как живую таблицу, которая меняется вместе с ними.
Как график следует за ячейками электронной таблицы?
Свяжите его в окне «Выбрать данные» командой «Связать с диапазоном электронной таблицы…»; после этого график строится по этому диапазону.
Чем «Связать с…» отличается от «Преобразовать в модель…»?
«Связать с…» привязывает фигуру к уже существующему элементу. «Преобразовать в модель…» создаёт из фигуры новый элемент, названный по её тексту, и связывает его.
Подробнее
Расшифровка
Показать расшифровку (дикторский текст и то, что на экране)
Introduction
Chapter four: live data, model items and clipart. A board can show figures that stay current, stand for items of the model, and use ready-made pictures.
In this chapter you finish the dock concept board.
Live data from pasted cells
Live data gets a board of its own. Click the plus in the Boards strip.
On screen: Boards strip → +.
The dock status is kept in a workbook: each station's docks, and the bikes available now. In Excel, select the cells and copy them.
On screen: Dock Status.xlsx.
Click the board, and press Command V, or Control V. Holarch asks how to paste the cells. Choose Live spreadsheet, and click Paste.
On screen: Click the board → ⌘V / Ctrl+V → Live spreadsheet → Paste.
Holarch creates a spreadsheet that holds the cells, and shows them on the board as a live table. Drag the table to the left.
On screen: The live table → drag it left.
A chart can follow the same cells. In the Tables and Charts panel, click Bar, and drag the chart beside the table.
On screen: Tables and Charts → Bar → drag it right.
Open Select Data, and click Link to Spreadsheet Range. Choose the new spreadsheet, type A1 to C5 as the range, and click Link.
On screen: Select Data… → Link to Spreadsheet Range… → A1:C5 → Link.
Select Data now names the linked range, and the chart shows the stations' docks and bikes. Click OK.
On screen: Linked range → OK.
The board follows the source
Now change a figure at its source. Double-click the table: its spreadsheet opens, with the cells selected.
On screen: Double-click the table → the spreadsheet.
Two more bikes are back at Riverside. In the Name Box, type C3 and press Enter, then type 6 in the formula bar, and press Enter.
On screen: Name Box C3 → formula bar 6 → Enter.
Go back to the board with its editor tab. The table and the chart already show six bikes at Riverside.
On screen: Editor tab → the board; the new value.
Model items on the board
Shapes on a board can stand for items of the model. Open Board 1, and select the rental kiosk.
On screen: Board 1 → select Rental Kiosk.
In the inspector's Model section, click Link to, search for Rental Kiosk, and choose the asset.
On screen: Link to… → Rental Kiosk (Asset).
The shape shows a badge, and the inspector names the linked asset. Click its name to see the asset's details in the side panel.
On screen: Badge; Model section → the asset.
A shape can also become a new item. Select the rider, and click Convert to Model. Choose Asset as the class, keep the name, and click Convert.
On screen: Rider → Convert to Model… → Asset → Convert.
The rider is now an asset of the model, linked to its shape, and listed in the Database with the other assets.
On screen: The linked Rider.
Clipart
Last, the Clipart panel: thousands of pictures and icons for concept graphics. Open it, and search for bicycle.
On screen: Clipart panel → search bicycle.
The star on a picture adds it to your favorites. Click a picture to add it to the board, and drag it below the rider.
On screen: Star → click the picture → drag it beside the rider.
Recap
To recap: paste cells as a live table, link charts to spreadsheet ranges in Select Data, link or convert shapes in the Model section, and add pictures from the Clipart panel.
That completes the whiteboard track. You can now sketch a concept with shapes and lines, chart its figures, keep them live, and tie the board to the model.
On screen: Track complete card, then end card.