Holarch
Розділи курсів

Навчання · Курс 13. Дошки · Розділ 13.4 з 4

13.4 Живі дані, елементи моделі та кліпарт 3:17

Вставляйте клітинки як живу таблицю, зв’язуйте графік із клітинками електронної таблиці, зв’язуйте й перетворюйте фігури на елементи моделі та додавайте кліпарт.

Показано Holarch 2.35.

← 13.3 Графіки · Усі розділи

Що ви дізнаєтеся

  • Вставити клітинки з Excel як живу таблицю електронної таблиці
  • Зв’язати графік із діапазоном електронної таблиці у «Вибрати дані»
  • Змінити значення в електронній таблиці й побачити, як дошка оновлюється
  • Зв’язати фігуру з елементом моделі й перетворити фігуру на новий елемент
  • Знаходити, позначати зіркою й вставляти кліпарт

Завершіть дошку концепції Bike-Share Dock: вставте клітинки стану док-станцій з Excel як живу таблицю електронної таблиці, зв’яжіть лінійчатий графік із тими самими клітинками через «Вибрати дані», змініть показник в електронній таблиці й побачте, як таблиця й графік оновлюються, зв’яжіть фігуру з Asset моделі й перетворіть іншу фігуру на новий Asset, а також додайте зображення з панелі «Кліпарт».

Файли проєкту

  • Початковий проєкт (.holarch.json; Керування проєктами → Файли проєкту ▾ → Імпортувати проєкт (.json)…)
  • Готовий проєкт (.holarch.json; Керування проєктами → Файли проєкту ▾ → Імпортувати проєкт (.json)…)

Відео відтворюється з holarch.app; див. Політику конфіденційності.

Практика

Виконайте це самі в Holarch на Bike-Share Dock.

  1. Відкрийте початковий файл розділу й дошку Dock Concept. Натисніть + на смузі аркушів.
  2. В Excel скопіюйте невеликий блок клітинок із рядком заголовків. Клацніть аркуш, натисніть ⌘V / Ctrl+V (або Ctrl+V), оберіть Динамічна електронна таблиця і натисніть Вставити.
  3. Вставте графік Стовпчик, відкрийте Вибрати дані… → Зв’язати з діапазоном електронної таблиці…, оберіть нову електронну таблицю, введіть діапазон і натисніть Зв’язати, потім OK.
  4. Двічі клацніть таблицю, змініть одне число в електронній таблиці й поверніться до дошки через її вкладку редактора.
  5. На аркуші 1 виберіть фігуру Rental Kiosk, натисніть Пов’язати з… і оберіть Asset Rental Kiosk. Виберіть Rider, натисніть Перетворити на модель…, оберіть Asset і натисніть Перетворити.
  6. Відкрийте Кліпарт, знайдіть bicycle, позначте одне зображення зіркою й натисніть його, щоб вставити.

Завдання виконано, коли таблиця й графік показують змінене вами число, обидві фігури мають значок класу, а на аркуші є зображення велосипеда.

Перевірте себе

  1. Чим відрізняється вставлення клітинок як графіка і як динамічної електронної таблиці?
  2. Як графік стежить за клітинками електронної таблиці?
  3. Чим відрізняються «Пов’язати з…» і «Перетворити на модель…»?
Показати відповіді
  1. Чим відрізняється вставлення клітинок як графіка і як динамічної електронної таблиці?

    Графік зберігає копію значень і не змінюється. Динамічна електронна таблиця створює електронну таблицю з цими клітинками й показує їх як живу таблицю, що змінюється разом із ними.

  2. Як графік стежить за клітинками електронної таблиці?

    Зв’яжіть його у «Вибрати дані» через «Зв’язати з діапазоном електронної таблиці…»; тоді графік будується з цього діапазону.

  3. Чим відрізняються «Пов’язати з…» і «Перетворити на модель…»?

    «Пов’язати з…» прив’язує фігуру до наявного елемента. «Перетворити на модель…» створює з фігури новий елемент, названий за її текстом, і зв’язує їх.

Докладніше

Стенограма

Показати стенограму (озвучення і те, що на екрані)

Introduction

Chapter four: live data, model items and clipart. A board can show figures that stay current, stand for items of the model, and use ready-made pictures.

In this chapter you finish the dock concept board.

Live data from pasted cells

Live data gets a board of its own. Click the plus in the Boards strip.

On screen: Boards strip → +.

The dock status is kept in a workbook: each station's docks, and the bikes available now. In Excel, select the cells and copy them.

On screen: Dock Status.xlsx.

Click the board, and press Command V, or Control V. Holarch asks how to paste the cells. Choose Live spreadsheet, and click Paste.

On screen: Click the board → ⌘V / Ctrl+V → Live spreadsheet → Paste.

Holarch creates a spreadsheet that holds the cells, and shows them on the board as a live table. Drag the table to the left.

On screen: The live table → drag it left.

A chart can follow the same cells. In the Tables and Charts panel, click Bar, and drag the chart beside the table.

On screen: Tables and Charts → Bar → drag it right.

Open Select Data, and click Link to Spreadsheet Range. Choose the new spreadsheet, type A1 to C5 as the range, and click Link.

On screen: Select Data… → Link to Spreadsheet Range… → A1:C5 → Link.

Select Data now names the linked range, and the chart shows the stations' docks and bikes. Click OK.

On screen: Linked range → OK.

The board follows the source

Now change a figure at its source. Double-click the table: its spreadsheet opens, with the cells selected.

On screen: Double-click the table → the spreadsheet.

Two more bikes are back at Riverside. In the Name Box, type C3 and press Enter, then type 6 in the formula bar, and press Enter.

On screen: Name Box C3 → formula bar 6 → Enter.

Go back to the board with its editor tab. The table and the chart already show six bikes at Riverside.

On screen: Editor tab → the board; the new value.

Model items on the board

Shapes on a board can stand for items of the model. Open Board 1, and select the rental kiosk.

On screen: Board 1 → select Rental Kiosk.

In the inspector's Model section, click Link to, search for Rental Kiosk, and choose the asset.

On screen: Link to… → Rental Kiosk (Asset).

The shape shows a badge, and the inspector names the linked asset. Click its name to see the asset's details in the side panel.

On screen: Badge; Model section → the asset.

A shape can also become a new item. Select the rider, and click Convert to Model. Choose Asset as the class, keep the name, and click Convert.

On screen: Rider → Convert to Model… → Asset → Convert.

The rider is now an asset of the model, linked to its shape, and listed in the Database with the other assets.

On screen: The linked Rider.

Clipart

Last, the Clipart panel: thousands of pictures and icons for concept graphics. Open it, and search for bicycle.

On screen: Clipart panel → search bicycle.

The star on a picture adds it to your favorites. Click a picture to add it to the board, and drag it below the rider.

On screen: Star → click the picture → drag it beside the rider.

Recap

To recap: paste cells as a live table, link charts to spreadsheet ranges in Select Data, link or convert shapes in the Model section, and add pictures from the Clipart panel.

That completes the whiteboard track. You can now sketch a concept with shapes and lines, chart its figures, keep them live, and tie the board to the model.

On screen: Track complete card, then end card.