Holarch
פרקי הקורס

הדרכה · מסלול 13. לוחות ציור · פרק 13.4 מתוך 4

13.4 נתונים חיים, פריטי מודל ואוסף איורים 3:17

מדביקים תאים כטבלה חיה, מקשרים תרשים לתאים של גיליון אלקטרוני, מקשרים וממירים צורות לפריטי מודל ומוסיפים איורים.

מציג את Holarch 2.35.

→ 13.3 תרשימים · כל הפרקים

מה תלמדו

  • להדביק תאים מ-Excel כטבלת גיליון אלקטרוני חיה
  • לקשר תרשים לטווח בגיליון אלקטרוני ב“בחירת נתונים”
  • לשנות ערך בגיליון האלקטרוני ולראות את הלוח מתעדכן בהתאם
  • לקשר צורה לפריט מודל, ולהמיר צורה לפריט חדש
  • למצוא, לסמן בכוכב ולהוסיף איורים

משלימים את לוח הציור של הקונספט Bike-Share Dock: מדביקים את תאי מצב התחנה מ-Excel כטבלת גיליון אלקטרוני חיה, מקשרים תרשים פסים לאותם תאים עם “בחירת נתונים”, משנים נתון בגיליון האלקטרוני ורואים את הטבלה והתרשים מתעדכנים בהתאם, מקשרים צורה לנכס של המודל וממירים צורה אחרת לנכס חדש, ומוסיפים תמונה מחלונית הקליפ-ארט.

קובצי פרויקט

  • פרויקט התחלה (.holarch.json; ניהול פרויקטים ← קובצי פרויקט ▾ ← ייבוא פרויקט (.json)…)
  • פרויקט גמור (.holarch.json; ניהול פרויקטים ← קובצי פרויקט ▾ ← ייבוא פרויקט (.json)…)

הסרטון מוצג מ-holarch.app; ראו את מדיניות הפרטיות.

תרגול

עושים את זה בעצמכם ב-Holarch, על Bike-Share Dock.

  1. פותחים את קובץ ההתחלה של הפרק ואת לוח הציור Dock Concept. לוחצים על + ברצועת הלוחות.
  2. ב-Excel מעתיקים גוש קטן של תאים עם שורת כותרת. לוחצים על הלוח, לוחצים ⌘V / Ctrl+V (או Ctrl+V), בוחרים גיליון אלקטרוני חי ולוחצים על הדבקה.
  3. מוסיפים תרשים פסים, פותחים את בחירת נתונים… ← קישור לטווח גיליון אלקטרוני…, בוחרים את הגיליון האלקטרוני החדש, מקלידים את הטווח ולוחצים על קישור, ואז על אישור.
  4. לוחצים לחיצה כפולה על הטבלה, משנים מספר אחד בגיליון האלקטרוני וחוזרים ללוח דרך כרטיסיית העורך שלו.
  5. בלוח 1 בוחרים את הצורה Rental Kiosk, לוחצים על קישור אל… ובוחרים את הנכס Rental Kiosk. בוחרים את Rider, לוחצים על המרה למודל…, בוחרים נכס ולוחצים על המרה.
  6. פותחים את קליפ-ארט, מחפשים bicycle, מסמנים תמונה אחת בכוכב ולוחצים עליה כדי להוסיף אותה.

סיימתם כשהטבלה והתרשים מציגים את המספר ששיניתם, שתי הצורות נושאות תג מחלקה, ותמונת אופניים נמצאת על הלוח.

בדיקה עצמית

  1. מה ההבדל בין הדבקת תאים כתרשים לבין הדבקה כגיליון אלקטרוני חי?
  2. איך תרשים עוקב אחרי תאים של גיליון אלקטרוני?
  3. מה ההבדל בין “קישור אל…” לבין “המרה למודל…”?
הצגת התשובות
  1. מה ההבדל בין הדבקת תאים כתרשים לבין הדבקה כגיליון אלקטרוני חי?

    תרשים שומר עותק של הערכים ואינו משתנה. גיליון אלקטרוני חי יוצר גיליון אלקטרוני עם התאים ומציג אותם כטבלה חיה שמשתנה איתם.

  2. איך תרשים עוקב אחרי תאים של גיליון אלקטרוני?

    מקשרים אותו ב“בחירת נתונים” עם “קישור לטווח גיליון אלקטרוני…”; התרשים משרטט אז מהטווח הזה.

  3. מה ההבדל בין “קישור אל…” לבין “המרה למודל…”?

    “קישור אל…” קושר את הצורה לפריט שכבר קיים. “המרה למודל…” יוצרת פריט חדש מהצורה, שנקרא על שם הטקסט שלה, ומקשרת אותו.

קריאה נוספת

תמליל

הצגת התמליל (הקריינות ומה שמוצג על המסך)

Introduction

Chapter four: live data, model items and clipart. A board can show figures that stay current, stand for items of the model, and use ready-made pictures.

In this chapter you finish the dock concept board.

Live data from pasted cells

Live data gets a board of its own. Click the plus in the Boards strip.

On screen: Boards strip → +.

The dock status is kept in a workbook: each station's docks, and the bikes available now. In Excel, select the cells and copy them.

On screen: Dock Status.xlsx.

Click the board, and press Command V, or Control V. Holarch asks how to paste the cells. Choose Live spreadsheet, and click Paste.

On screen: Click the board → ⌘V / Ctrl+V → Live spreadsheet → Paste.

Holarch creates a spreadsheet that holds the cells, and shows them on the board as a live table. Drag the table to the left.

On screen: The live table → drag it left.

A chart can follow the same cells. In the Tables and Charts panel, click Bar, and drag the chart beside the table.

On screen: Tables and Charts → Bar → drag it right.

Open Select Data, and click Link to Spreadsheet Range. Choose the new spreadsheet, type A1 to C5 as the range, and click Link.

On screen: Select Data… → Link to Spreadsheet Range… → A1:C5 → Link.

Select Data now names the linked range, and the chart shows the stations' docks and bikes. Click OK.

On screen: Linked range → OK.

The board follows the source

Now change a figure at its source. Double-click the table: its spreadsheet opens, with the cells selected.

On screen: Double-click the table → the spreadsheet.

Two more bikes are back at Riverside. In the Name Box, type C3 and press Enter, then type 6 in the formula bar, and press Enter.

On screen: Name Box C3 → formula bar 6 → Enter.

Go back to the board with its editor tab. The table and the chart already show six bikes at Riverside.

On screen: Editor tab → the board; the new value.

Model items on the board

Shapes on a board can stand for items of the model. Open Board 1, and select the rental kiosk.

On screen: Board 1 → select Rental Kiosk.

In the inspector's Model section, click Link to, search for Rental Kiosk, and choose the asset.

On screen: Link to… → Rental Kiosk (Asset).

The shape shows a badge, and the inspector names the linked asset. Click its name to see the asset's details in the side panel.

On screen: Badge; Model section → the asset.

A shape can also become a new item. Select the rider, and click Convert to Model. Choose Asset as the class, keep the name, and click Convert.

On screen: Rider → Convert to Model… → Asset → Convert.

The rider is now an asset of the model, linked to its shape, and listed in the Database with the other assets.

On screen: The linked Rider.

Clipart

Last, the Clipart panel: thousands of pictures and icons for concept graphics. Open it, and search for bicycle.

On screen: Clipart panel → search bicycle.

The star on a picture adds it to your favorites. Click a picture to add it to the board, and drag it below the rider.

On screen: Star → click the picture → drag it beside the rider.

Recap

To recap: paste cells as a live table, link charts to spreadsheet ranges in Select Data, link or convert shapes in the Model section, and add pictures from the Clipart panel.

That completes the whiteboard track. You can now sketch a concept with shapes and lines, chart its figures, keep them live, and tie the board to the model.

On screen: Track complete card, then end card.