Holarch
פרקי הקורס

הדרכה · מסלול 1. תחילת עבודה · פרק 1.3 מתוך 8

1.3 מאפיינים וקשרים 3:29

מתארים פריטים ומחברים אותם למודל.

מציג את Holarch 2.41.

מה תלמדו

  • לערוך בחלונית המאפיינים את המאפיינים של פריט, כמו הנימוק של דרישה
  • לקשר פריטים עם “קישור פריט קיים…” ולקרוא כל קישור משני הקצוות
  • לפרק נכס לחלקים ולהקצות פונקציה לחלק שמבצע אותה
  • ליצור עקיבות מפונקציה לדרישה שהיא מקיימת
  • לנווט במודל דרך פריטים קשורים בתצוגת הפריט

מתארים את הפריטים של Bike-Share Dock במאפיינים (תיאור, נימוק, סטטוס) ומחברים אותם בקשרים: עקיבות מדרישה לצורך שממנו היא נובעת, פירוק המערכת לחלקיה, איזה חלק מבצע איזו פונקציה ואיזו פונקציה מקיימת איזו דרישה, וקריאת כל קישור משני הקצוות בחלונית המאפיינים ובתצוגת הפריט.

קובצי פרויקט

  • פרויקט התחלה (.holarch.json; ניהול פרויקטים ← קובצי פרויקט ▾ ← ייבוא פרויקט (.json)…)
  • פרויקט גמור (.holarch.json; ניהול פרויקטים ← קובצי פרויקט ▾ ← ייבוא פרויקט (.json)…)

הסרטון מוצג מ-holarch.app; ראו את מדיניות הפרטיות.

תרגול

עשו זאת בעצמכם ב-Holarch, על פרויקט ההדגמה CubeSat EO-1.

  1. פותחים את פרויקט ההדגמה EO-1 (או יוצרים אותו: ניהול פרויקטים ← קובצי פרויקט ▾ ← פרויקט הדגמה חדש ← CubeSat (הנדסת מערכות מודרכת)).
  2. במסד הנתונים בוחרים את 2.5 Safe Mode Recovery ומקלידים נימוק בחלונית המאפיינים (למה החללית חייבת לצאת ממצב בטוח בעצמה).
  3. בוחרים את F10 Enter Safe Mode. בעקיבות מוצאים את satisfies (מסמנים הצגת כל הקשרים אם הוא אינו מופיע), לוחצים על + ← קישור פריט קיים…, מסמנים את 2.5 Safe Mode Recovery ולוחצים על קישור הנבחרים. בוחרים את 2.5 ומוצאים את אותו קישור תחת satisfied by.
  4. בוחרים את 1.4 C&DH, מסמנים הצגת כל הקשרים, ומקשרים אותו עם performs אל OPS.9 Hold Data Onboard, שלב התפעול היחיד שאף חלק עדיין אינו מבצע.
  5. בוחרים את 2.2 Mission Operations Center. ב-decomposed by לוחצים על + ← Asset חדש… ויוצרים את Image Processing Server.
  6. לוחצים לחיצה כפולה על F10 Enter Safe Mode כדי לפתוח את תצוגת פריט, ואז לוחצים על השמות הקשורים: מ-F10 אל 1.4 C&DH, ומשם אל 1 EO-1 Spacecraft.

סיימתם כשתצוגת הפריט של 2.5 Safe Mode Recovery מפרטת את F10 תחת satisfied by, ו-OPS.9 מפרטת את 1.4 C&DH תחת performed by.

בדיקה עצמית

  1. מוסיפים קישור מ-F10 עם satisfies. למה 2.5 מציגה עכשיו satisfied by בלי שום צעד נוסף?
  2. למה הבורר ב“קישור פריט קיים…” אינו מציע כל פריט בפרויקט?
  3. מה קישור נכס עם performs לפעולה מתעד במונחי הנדסת מערכות?
הצגת התשובות
  1. מוסיפים קישור מ-F10 עם satisfies. למה 2.5 מציגה עכשיו satisfied by בלי שום צעד נוסף?

    לכל קשר יש שם בכל כיוון. זה קישור אחד, שנקרא satisfies מצד הפונקציה ו-satisfied by מצד הדרישה.

  2. למה הבורר ב“קישור פריט קיים…” אינו מציע כל פריט בפרויקט?

    הוא מפרט רק פריטים מהמחלקות שהקשר מתיר עבור הפריט הזה, כך שאי אפשר ליצור קישור שהסכמה אינה מגדירה.

  3. מה קישור נכס עם performs לפעולה מתעד במונחי הנדסת מערכות?

    הקצאה של פונקציה לחלק הפיזי שמבצע אותה.

קריאה נוספת

תמליל

הצגת התמליל (הקריינות ומה שמוצג על המסך)

Introduction

Chapter three: attributes and relationships. Attributes describe an item. Relationships connect items, and they are what turn a list of items into a model.

We continue with the Bike-Share Dock project from the last chapter.

Attributes

Open the Database, and select the requirement Unlock a Bike. The inspector's Item section holds its number, name and description. Below it, Attributes holds the attributes of its class, such as a rationale and a status.

On screen: Database → 1.1 Unlock a Bike → Attributes.

A rationale says why the requirement exists, which helps when someone later wants to change it. Type it in, and click elsewhere to save.

On screen: Rationale.

Asset and Action have their own attributes, such as a function's duration, which simulation uses later. A project owner can add attributes to any class in the Schema.

On screen: Attributes of an Action.

Relate items

Now the relationships. Select Unlock a Bike again, and click Trace in the inspector. It groups the relations of this class by purpose. Find traced from, click its plus button, and choose Link existing.

On screen: Trace → traced from → + → Link existing…

The picker lists only items that this relation allows. Check Find a Bike Nearby, the need this requirement answers, and click Link Selected.

On screen: Pick N.1 → Link Selected.

Every relationship has a name in each direction. Select the need, and its Trace shows the same link the other way round: Find a Bike Nearby is traced to Unlock a Bike.

On screen: N.1 → traced to 1.1.

Structure and allocation

Next, the system's structure. Select Bike-Share Dock, find decomposed by, and relate its three parts at once: the docking bay, the kiosk and the charging unit. The back office service is an external system, outside the dock, so it is not one of its parts.

On screen: S.0 → decomposed by → S.1–S.3.

Then say which part does what. Select the kiosk. Performs has no links yet, so tick Show all relations, and relate the kiosk with performs to Rent a Bike and Take Payment. In systems engineering terms, you are allocating functions to the physical parts.

On screen: S.2 Kiosk → Show all relations → performs → F.1, F.4.

The docking bay performs Return a Bike, and the charging unit performs Charge Bikes. They are related the same way.

On screen: S.1, S.3 performs (entered off camera).

Finally, link the function to the requirement it meets. Select Rent a Bike, and relate it with satisfies to Unlock a Bike.

On screen: F.1 → satisfies → 1.1.

Reading the links

Trace shows the relations that have links, plus a few kept visible even when empty. Untick Show all relations, and you see just what this function is connected to.

On screen: Trace → Show all relations off.

Double-click the row to open the Entity View. It shows the same sections on a full page, and linking works here too.

On screen: Entity View of Rent a Bike.

Click a related item's name to move to it. From the function, go to the kiosk that performs it, and from there to the dock it belongs to. This is how you walk the model.

On screen: Entity View: → Kiosk → Bike-Share Dock.

Recap

Let's recap. You edited attributes, related items with Link existing, read each link from both ends, decomposed the system, allocated functions to parts, and walked the links in the Entity View.

Next, you draw part of this model as a diagram.