Holarch
Главы курса

Обучение · Курс 1. Начало работы · Глава 1.3 из 8

1.3 Атрибуты и связи 3:29

Опишите элементы и соедините их в модель.

Показан Holarch 2.41.

← 1.2 Ваш первый проект · Все главы · 1.4 Ваша первая диаграмма →

Чему вы научитесь

  • Изменять атрибуты элемента, например обоснование требования, в инспекторе
  • Связывать элементы через «Связать существующий…» и читать каждую связь с обоих концов
  • Декомпозировать актив на части и распределять функцию на выполняющую её часть
  • Прослеживать функцию к требованию, которому она удовлетворяет
  • Перемещаться по модели через связанные элементы в Виде элемента

Опишите элементы станции Bike-Share Dock атрибутами (описание, обоснование, статус) и соедините их связями: проследите требование к потребности, из которой оно вытекает, декомпозируйте систему на части, укажите, какая часть выполняет какую функцию и какая функция удовлетворяет какому требованию, и прочитайте каждую связь с обоих концов в инспекторе и в Виде элемента.

Файлы проектов

  • Начальный проект (.holarch.json; Управление проектами → Файлы проекта ▾ → Импортировать проект (.json)…)
  • Готовый проект (.holarch.json; Управление проектами → Файлы проекта ▾ → Импортировать проект (.json)…)

Видео воспроизводится с holarch.app; см. Политику конфиденциальности.

Практика

Выполните это сами в Holarch на демо-проекте CubeSat EO-1.

  1. Откройте свой демо-проект EO-1 (или создайте его: Управление проектами → Файлы проекта ▾ → Новый демо-проект → CubeSat (пошаговая системная инженерия)).
  2. В Базе данных выберите 2.5 Safe Mode Recovery и введите в инспекторе Обоснование (почему космический аппарат должен выходить из безопасного режима самостоятельно).
  3. Выберите F10 Enter Safe Mode. В разделе Трассировка найдите satisfies (установите флажок Показать все связи, если её нет в списке), нажмите + → Связать существующий…, отметьте 2.5 Safe Mode Recovery и нажмите Связать выбранные. Выберите 2.5 и найдите ту же связь в satisfied by.
  4. Выберите 1.4 C&DH, установите флажок Показать все связи и свяжите его связью performs с OPS.9 Hold Data Onboard — единственным шагом операций, который пока не выполняет ни одна часть.
  5. Выберите 2.2 Mission Operations Center. У decomposed by нажмите + → Новый Asset… и создайте Image Processing Server.
  6. Дважды щёлкните F10 Enter Safe Mode, чтобы открыть Вид элемента, затем переходите по именам связанных элементов: от F10 к 1.4 C&DH, а оттуда к 1 EO-1 Spacecraft.

Готово, когда Вид элемента для 2.5 Safe Mode Recovery показывает F10 в satisfied by, а OPS.9 показывает 1.4 C&DH в performed by.

Проверьте себя

  1. Вы добавляете связь от F10 через satisfies. Почему 2.5 теперь показывает satisfied by без дополнительных действий?
  2. Почему список выбора в «Связать существующий…» предлагает не все элементы проекта?
  3. Что в терминах системной инженерии фиксирует связь актива с действием через performs?
Показать ответы
  1. Вы добавляете связь от F10 через satisfies. Почему 2.5 теперь показывает satisfied by без дополнительных действий?

    У каждой связи есть имя в каждом направлении. Это одна связь, которая читается как satisfies со стороны функции и как satisfied by со стороны требования.

  2. Почему список выбора в «Связать существующий…» предлагает не все элементы проекта?

    Он показывает только элементы тех классов, которые связь допускает для этого элемента, поэтому нельзя создать связь, не определённую схемой.

  3. Что в терминах системной инженерии фиксирует связь актива с действием через performs?

    Распределение функции на физическую часть, которая её выполняет.

Подробнее

Расшифровка

Показать расшифровку (дикторский текст и то, что на экране)

Introduction

Chapter three: attributes and relationships. Attributes describe an item. Relationships connect items, and they are what turn a list of items into a model.

We continue with the Bike-Share Dock project from the last chapter.

Attributes

Open the Database, and select the requirement Unlock a Bike. The inspector's Item section holds its number, name and description. Below it, Attributes holds the attributes of its class, such as a rationale and a status.

On screen: Database → 1.1 Unlock a Bike → Attributes.

A rationale says why the requirement exists, which helps when someone later wants to change it. Type it in, and click elsewhere to save.

On screen: Rationale.

Asset and Action have their own attributes, such as a function's duration, which simulation uses later. A project owner can add attributes to any class in the Schema.

On screen: Attributes of an Action.

Relate items

Now the relationships. Select Unlock a Bike again, and click Trace in the inspector. It groups the relations of this class by purpose. Find traced from, click its plus button, and choose Link existing.

On screen: Trace → traced from → + → Link existing…

The picker lists only items that this relation allows. Check Find a Bike Nearby, the need this requirement answers, and click Link Selected.

On screen: Pick N.1 → Link Selected.

Every relationship has a name in each direction. Select the need, and its Trace shows the same link the other way round: Find a Bike Nearby is traced to Unlock a Bike.

On screen: N.1 → traced to 1.1.

Structure and allocation

Next, the system's structure. Select Bike-Share Dock, find decomposed by, and relate its three parts at once: the docking bay, the kiosk and the charging unit. The back office service is an external system, outside the dock, so it is not one of its parts.

On screen: S.0 → decomposed by → S.1–S.3.

Then say which part does what. Select the kiosk. Performs has no links yet, so tick Show all relations, and relate the kiosk with performs to Rent a Bike and Take Payment. In systems engineering terms, you are allocating functions to the physical parts.

On screen: S.2 Kiosk → Show all relations → performs → F.1, F.4.

The docking bay performs Return a Bike, and the charging unit performs Charge Bikes. They are related the same way.

On screen: S.1, S.3 performs (entered off camera).

Finally, link the function to the requirement it meets. Select Rent a Bike, and relate it with satisfies to Unlock a Bike.

On screen: F.1 → satisfies → 1.1.

Reading the links

Trace shows the relations that have links, plus a few kept visible even when empty. Untick Show all relations, and you see just what this function is connected to.

On screen: Trace → Show all relations off.

Double-click the row to open the Entity View. It shows the same sections on a full page, and linking works here too.

On screen: Entity View of Rent a Bike.

Click a related item's name to move to it. From the function, go to the kiosk that performs it, and from there to the dock it belongs to. This is how you walk the model.

On screen: Entity View: → Kiosk → Bike-Share Dock.

Recap

Let's recap. You edited attributes, related items with Link existing, read each link from both ends, decomposed the system, allocated functions to parts, and walked the links in the Entity View.

Next, you draw part of this model as a diagram.