Holarch
Розділи курсів

Навчання · Курс 1. Початок роботи · Розділ 1.3 з 8

1.3 Атрибути та зв’язки 3:29

Опишіть елементи й поєднайте їх у модель.

Показано Holarch 2.41.

← 1.2 Ваш перший проєкт · Усі розділи · 1.4 Ваша перша діаграма →

Що ви дізнаєтеся

  • Редагувати атрибути елемента, наприклад обґрунтування вимоги, в інспекторі
  • Пов’язувати елементи через «Зв’язати наявний…» і читати кожен зв’язок з обох кінців
  • Декомпозувати Asset на частини й розподілити функцію на частину, що її виконує
  • Простежити функцію до вимоги, яку вона задовольняє
  • Переходити моделлю через пов’язані елементи в Поданні елемента

Опишіть елементи Bike-Share Dock атрибутами (опис, обґрунтування, статус) і поєднайте їх зв’язками: простежте вимогу до потреби, з якої вона походить, декомпозуйте систему на частини, укажіть, яка частина виконує яку функцію і яка функція задовольняє яку вимогу, і прочитайте кожен зв’язок з обох кінців в інспекторі та Поданні елемента.

Файли проєкту

  • Початковий проєкт (.holarch.json; Керування проєктами → Файли проєкту ▾ → Імпортувати проєкт (.json)…)
  • Готовий проєкт (.holarch.json; Керування проєктами → Файли проєкту ▾ → Імпортувати проєкт (.json)…)

Відео відтворюється з holarch.app; див. Політику конфіденційності.

Практика

Виконайте це самостійно в Holarch на демопроєкті CubeSat EO-1.

  1. Відкрийте свій демопроєкт EO-1 (або створіть його: Керування проєктами → Файли проєкту ▾ → Новий демопроєкт → CubeSat (системна інженерія з посібником)).
  2. У Базі даних виберіть 2.5 Safe Mode Recovery і введіть Обґрунтування в інспекторі (чому космічний апарат має виходити з безпечного режиму самостійно).
  3. Виберіть F10 Enter Safe Mode. У розділі Трасування знайдіть satisfies (позначте Показати всі зв’язки, якщо його немає в списку), натисніть + → Зв’язати наявний…, позначте 2.5 Safe Mode Recovery і натисніть Зв’язати вибрані. Виберіть 2.5 і знайдіть той самий зв’язок у satisfied by.
  4. Виберіть 1.4 C&DH, позначте Показати всі зв’язки і пов’яжіть його зв’язком performs з OPS.9 Hold Data Onboard — єдиним кроком операцій, який ще не виконує жодна частина.
  5. Виберіть 2.2 Mission Operations Center. У decomposed by натисніть + → Новий Asset… і створіть Image Processing Server.
  6. Двічі клацніть F10 Enter Safe Mode, щоб відкрити Подання елемента, а потім переходьте за назвами пов’язаних елементів: від F10 до 1.4 C&DH, а звідти до 1 EO-1 Spacecraft.

Завдання виконано, коли Подання елемента 2.5 Safe Mode Recovery показує F10 у satisfied by, а OPS.9 показує 1.4 C&DH у performed by.

Перевірте себе

  1. Ви додаєте зв’язок від F10 через satisfies. Чому 2.5 тепер показує satisfied by без жодного додаткового кроку?
  2. Чому вибір у «Зв’язати наявний…» пропонує не всі елементи проєкту?
  3. Що фіксує в термінах системної інженерії зв’язок performs від Asset до Action?
Показати відповіді
  1. Ви додаєте зв’язок від F10 через satisfies. Чому 2.5 тепер показує satisfied by без жодного додаткового кроку?

    Кожен зв’язок має назву в кожному напрямку. Це один зв’язок, який з боку функції читається як satisfies, а з боку вимоги — як satisfied by.

  2. Чому вибір у «Зв’язати наявний…» пропонує не всі елементи проєкту?

    Він показує лише елементи тих класів, які зв’язок дозволяє для цього елемента, тож створити зв’язок, не визначений схемою, неможливо.

  3. Що фіксує в термінах системної інженерії зв’язок performs від Asset до Action?

    Розподіл функції на фізичну частину, яка її виконує.

Докладніше

Стенограма

Показати стенограму (озвучення і те, що на екрані)

Introduction

Chapter three: attributes and relationships. Attributes describe an item. Relationships connect items, and they are what turn a list of items into a model.

We continue with the Bike-Share Dock project from the last chapter.

Attributes

Open the Database, and select the requirement Unlock a Bike. The inspector's Item section holds its number, name and description. Below it, Attributes holds the attributes of its class, such as a rationale and a status.

On screen: Database → 1.1 Unlock a Bike → Attributes.

A rationale says why the requirement exists, which helps when someone later wants to change it. Type it in, and click elsewhere to save.

On screen: Rationale.

Asset and Action have their own attributes, such as a function's duration, which simulation uses later. A project owner can add attributes to any class in the Schema.

On screen: Attributes of an Action.

Relate items

Now the relationships. Select Unlock a Bike again, and click Trace in the inspector. It groups the relations of this class by purpose. Find traced from, click its plus button, and choose Link existing.

On screen: Trace → traced from → + → Link existing…

The picker lists only items that this relation allows. Check Find a Bike Nearby, the need this requirement answers, and click Link Selected.

On screen: Pick N.1 → Link Selected.

Every relationship has a name in each direction. Select the need, and its Trace shows the same link the other way round: Find a Bike Nearby is traced to Unlock a Bike.

On screen: N.1 → traced to 1.1.

Structure and allocation

Next, the system's structure. Select Bike-Share Dock, find decomposed by, and relate its three parts at once: the docking bay, the kiosk and the charging unit. The back office service is an external system, outside the dock, so it is not one of its parts.

On screen: S.0 → decomposed by → S.1–S.3.

Then say which part does what. Select the kiosk. Performs has no links yet, so tick Show all relations, and relate the kiosk with performs to Rent a Bike and Take Payment. In systems engineering terms, you are allocating functions to the physical parts.

On screen: S.2 Kiosk → Show all relations → performs → F.1, F.4.

The docking bay performs Return a Bike, and the charging unit performs Charge Bikes. They are related the same way.

On screen: S.1, S.3 performs (entered off camera).

Finally, link the function to the requirement it meets. Select Rent a Bike, and relate it with satisfies to Unlock a Bike.

On screen: F.1 → satisfies → 1.1.

Reading the links

Trace shows the relations that have links, plus a few kept visible even when empty. Untick Show all relations, and you see just what this function is connected to.

On screen: Trace → Show all relations off.

Double-click the row to open the Entity View. It shows the same sections on a full page, and linking works here too.

On screen: Entity View of Rent a Bike.

Click a related item's name to move to it. From the function, go to the kiosk that performs it, and from there to the dock it belongs to. This is how you walk the model.

On screen: Entity View: → Kiosk → Bike-Share Dock.

Recap

Let's recap. You edited attributes, related items with Link existing, read each link from both ends, decomposed the system, allocated functions to parts, and walked the links in the Entity View.

Next, you draw part of this model as a diagram.