Kurskapitel
Schulung · Reihe 1. Erste Schritte · Kapitel 1.3 von 8
1.3 Attribute und Beziehungen 3:29
Elemente beschreiben und zu einem Modell verbinden.
Zeigt Holarch 2.41.
Das lernen Sie
- Die Attribute eines Elements, etwa die Begründung einer Anforderung, im Inspektor bearbeiten
- Elemente mit „Vorhandenes verknüpfen…“ in Beziehung setzen und jeden Link von beiden Enden lesen
- Ein Asset in Teile zerlegen und eine Funktion dem Teil zuordnen, das sie ausführt
- Eine Funktion zu der Anforderung nachverfolgen, die sie erfüllt
- In der Elementansicht über verwandte Elemente durch das Modell gehen
Beschreiben Sie die Elemente des Bike-Share Dock mit Attributen (Beschreibung, Begründung, Status) und verbinden Sie sie mit Beziehungen: eine Anforderung zu dem Bedarf nachverfolgen, aus dem sie stammt, das System in seine Teile zerlegen, angeben, welcher Teil welche Funktion ausführt und welche Funktion welche Anforderung erfüllt, und jeden Link von beiden Enden im Inspektor und in der Elementansicht lesen.
Projektdateien
- Startprojekt (.holarch.json; Projekte verwalten → Projektdateien ▾ → Projekt importieren (.json)…)
- Fertiges Projekt (.holarch.json; Projekte verwalten → Projektdateien ▾ → Projekt importieren (.json)…)
Das Video wird von holarch.app abgespielt; siehe Datenschutzerklärung.
Übung
Führen Sie dies selbst in Holarch durch, am Demoprojekt CubeSat EO-1.
- Öffnen Sie Ihr EO-1-Demoprojekt (oder erstellen Sie es: Projekte verwalten → Projektdateien ▾ → Neues Demoprojekt → CubeSat (Geführtes Systems Engineering)).
- Wählen Sie in der Datenbank 2.5 Safe Mode Recovery aus und geben Sie im Inspektor eine Begründung ein (warum das Raumfahrzeug den Safe Mode selbstständig verlassen muss).
- Wählen Sie F10 Enter Safe Mode aus. Suchen Sie unter Nachverfolgung satisfies (aktivieren Sie Alle Relationen anzeigen, wenn es nicht aufgeführt ist), klicken Sie auf + → Vorhandenes verknüpfen…, aktivieren Sie 2.5 Safe Mode Recovery und klicken Sie auf Auswahl verknüpfen. Wählen Sie 2.5 aus und suchen Sie denselben Link unter satisfied by.
- Wählen Sie 1.4 C&DH aus, aktivieren Sie Alle Relationen anzeigen und setzen Sie es mit performs in Beziehung zu OPS.9 Hold Data Onboard, dem einen Betriebsschritt, den noch kein Teil ausführt.
- Wählen Sie 2.2 Mission Operations Center aus. Klicken Sie bei decomposed by auf + → Neues Asset… und erstellen Sie
Image Processing Server. - Doppelklicken Sie auf F10 Enter Safe Mode, um die Elementansicht zu öffnen, und klicken Sie dann durch die verwandten Namen: von F10 zu 1.4 C&DH und von dort zu 1 EO-1 Spacecraft.
Sie sind fertig, wenn die Elementansicht von 2.5 Safe Mode Recovery F10 unter satisfied by auflistet und OPS.9 1.4 C&DH unter performed by auflistet.
Selbsttest
- Sie fügen von F10 aus einen Link mit satisfies hinzu. Warum zeigt 2.5 jetzt ohne weiteren Schritt satisfied by?
- Warum bietet die Auswahl in „Vorhandenes verknüpfen…“ nicht jedes Element des Projekts an?
- Was hält es in Begriffen des Systems Engineering fest, wenn man ein Asset mit performs zu einer Action in Beziehung setzt?
Antworten anzeigen
Sie fügen von F10 aus einen Link mit satisfies hinzu. Warum zeigt 2.5 jetzt ohne weiteren Schritt satisfied by?
Jede Beziehung hat in jeder Richtung einen Namen. Es ist ein Link, gelesen als satisfies von der Funktion und als satisfied by von der Anforderung aus.
Warum bietet die Auswahl in „Vorhandenes verknüpfen…“ nicht jedes Element des Projekts an?
Sie listet nur Elemente der Klassen auf, die die Relation für dieses Element erlaubt, sodass Sie keinen Link anlegen können, den das Schema nicht definiert.
Was hält es in Begriffen des Systems Engineering fest, wenn man ein Asset mit performs zu einer Action in Beziehung setzt?
Die Zuordnung einer Funktion zu dem physischen Teil, der sie ausführt.
Weiterlesen
- Dokumentation: Modelldatenbank, Entitäten in Beziehung setzen
- Dokumentation: Modelldatenbank, Attribute
- Dokumentation: Modelldatenbank, Die Elementansicht
- Dokumentation: Nachverfolgbarkeit, Beziehungen und ihre Umkehrungen
- Hilfe: LML-Beziehungen (Schema)
- Leitfaden: Funktionale, logische und physische Architektur im MBSE
Transkript
Transkript anzeigen (Erzählung und Bildschirminhalt)
Introduction
Chapter three: attributes and relationships. Attributes describe an item. Relationships connect items, and they are what turn a list of items into a model.
We continue with the Bike-Share Dock project from the last chapter.
Attributes
Open the Database, and select the requirement Unlock a Bike. The inspector's Item section holds its number, name and description. Below it, Attributes holds the attributes of its class, such as a rationale and a status.
On screen: Database → 1.1 Unlock a Bike → Attributes.
A rationale says why the requirement exists, which helps when someone later wants to change it. Type it in, and click elsewhere to save.
On screen: Rationale.
Asset and Action have their own attributes, such as a function's duration, which simulation uses later. A project owner can add attributes to any class in the Schema.
On screen: Attributes of an Action.
Relate items
Now the relationships. Select Unlock a Bike again, and click Trace in the inspector. It groups the relations of this class by purpose. Find traced from, click its plus button, and choose Link existing.
On screen: Trace → traced from → + → Link existing…
The picker lists only items that this relation allows. Check Find a Bike Nearby, the need this requirement answers, and click Link Selected.
On screen: Pick N.1 → Link Selected.
Every relationship has a name in each direction. Select the need, and its Trace shows the same link the other way round: Find a Bike Nearby is traced to Unlock a Bike.
On screen: N.1 → traced to 1.1.
Structure and allocation
Next, the system's structure. Select Bike-Share Dock, find decomposed by, and relate its three parts at once: the docking bay, the kiosk and the charging unit. The back office service is an external system, outside the dock, so it is not one of its parts.
On screen: S.0 → decomposed by → S.1–S.3.
Then say which part does what. Select the kiosk. Performs has no links yet, so tick Show all relations, and relate the kiosk with performs to Rent a Bike and Take Payment. In systems engineering terms, you are allocating functions to the physical parts.
On screen: S.2 Kiosk → Show all relations → performs → F.1, F.4.
The docking bay performs Return a Bike, and the charging unit performs Charge Bikes. They are related the same way.
On screen: S.1, S.3 performs (entered off camera).
Finally, link the function to the requirement it meets. Select Rent a Bike, and relate it with satisfies to Unlock a Bike.
On screen: F.1 → satisfies → 1.1.
Reading the links
Trace shows the relations that have links, plus a few kept visible even when empty. Untick Show all relations, and you see just what this function is connected to.
On screen: Trace → Show all relations off.
Double-click the row to open the Entity View. It shows the same sections on a full page, and linking works here too.
On screen: Entity View of Rent a Bike.
Click a related item's name to move to it. From the function, go to the kiosk that performs it, and from there to the dock it belongs to. This is how you walk the model.
On screen: Entity View: → Kiosk → Bike-Share Dock.
Recap
Let's recap. You edited attributes, related items with Link existing, read each link from both ends, decomposed the system, allocated functions to parts, and walked the links in the Entity View.
Next, you draw part of this model as a diagram.