Holarch
コースのチャプター

トレーニング · トラック 1. はじめに · チャプター 1.4(全 8 チャプター)

1.4 最初のダイアグラム 4:00

モデルを描き、ダイアグラム上で追加し、1 つのモデルがすべてのビューに表示されることを確認します。

Holarch 1.27 の画面です。

学習内容

  • + 新しいダイアグラムからシステムの Asset 図を作成する
  • 各部品が実行する機能をダイアグラムに表示する
  • ダイアグラム上で部品とコンジットを追加し、データベースで見つける
  • ダイアグラムの種類を切り替えて、同じ項目を階層として表示する
  • 1 つの要求の周りのトレースを示す Spider 図を作成する

既存のシステム項目から Bike-Share Dock の Asset 図を作成します。Holarch は関係からその部品と機能を描きます。外部のバックオフィスとコンジット、新しい部品と電源ケーブルを追加し、ダイアグラム上で部品の名前を変更してデータベースでその変更を確認し、同じ項目を階層として表示して、Spider 図で要求をトレースします。

プロジェクトファイル

  • 開始時のプロジェクト (.holarch.json。プロジェクトを管理 → プロジェクトファイル ▾ → プロジェクトをインポート (.json)…)
  • 完成したプロジェクト (.holarch.json。プロジェクトを管理 → プロジェクトファイル ▾ → プロジェクトをインポート (.json)…)

動画は holarch.app から再生されます。プライバシーポリシーをご覧ください。

演習

CubeSat EO-1 デモプロジェクトを使って、Holarch で実際に操作します。

  1. EO-1 デモプロジェクトを開きます(または作成します:プロジェクトを管理 → プロジェクトファイル ▾ → 新しいデモプロジェクト → CubeSat(ガイド付きシステムズエンジニアリング))。
  2. レールの下部にあるダイアグラムをクリックし、+ 新しいダイアグラムをクリックします。Asset 図を選び、ダイアグラムの対象に EPS と入力して 1.3 EPS を選び、作成をクリックします。実行する Action をオンにすると、各部品がどの機能を実行するかが分かります。
  3. + Asset ▾ → 新しい子 Asset…を選び、Battery Heater を作成します。ダイアグラムのツールバーで ⋯(その他の操作)をクリックし、+ Conduit を選んで、Battery Pack から Battery Heater へ、Heater Power Line という名前で作成します。次に 整列 ▾ → レイアウトを整理を選びます。
  4. データベースを開き、Battery Heater と Heater Power Line が新しい行として追加されていることを確認します。
  5. ダイアグラムのタブに戻り、種類の選択で 階層図に切り替えます。
  6. 3.2 Battery Capacity の Spider 図を作成し、レベルは 2 のままにします。

3.2 の Spider 図に、それを満たす Battery Pack と、それを検証する TC-07 Battery Capacity Test が表示されれば完了です。

確認問題

  1. 何も削除せず、ダイアグラム上で部品の名前を変更します。新しい名前は他にどこに表示されますか?
  2. 1.3 EPS の新しい Asset 図に、最初から 3 つの部品が表示されるのはなぜですか?
  3. Spider 図が Asset 図より役立つのはどんなときですか?
解答を表示
  1. 何も削除せず、ダイアグラム上で部品の名前を変更します。新しい名前は他にどこに表示されますか?

    その項目が表示されるすべての場所です。データベース、ドキュメント、他のダイアグラム、インスペクターです。ダイアグラムはモデルのビューであり、別の図面ではありません。

  2. 1.3 EPS の新しい Asset 図に、最初から 3 つの部品が表示されるのはなぜですか?

    ダイアグラムはモデルにすでにある decomposed by 関係を読むため、手作業で配置しなくても部品が描かれます。

  3. Spider 図が Asset 図より役立つのはどんなときですか?

    関係の種類をまたいで、1 つの項目の周りのトレースを見たいときです。ニーズ、機能、部品、テストなどで、たとえば変更の影響を判断するときに使います。

関連資料

トランスクリプト

トランスクリプトを表示 (ナレーションと画面の内容)

Introduction

Chapter four: your first diagram. In Holarch a diagram is a view of the model. It draws items and relationships that already exist, and whatever you add on a diagram goes into the model.

We continue with the Bike-Share Dock, whose parts and functions we related in the last chapter.

Create a diagram

Open Diagrams at the bottom of the rail. It lists every diagram in the project. None is saved yet, but Holarch already offers derived views of the dock, because the dock has parts.

On screen: Diagrams page: derived views only.

Click New Diagram, and pick the type. An Asset Diagram shows a system and its parts.

On screen: + New Diagram → Asset Diagram.

Then choose the root, the item the diagram is about. Type the first letters of Bike-Share Dock, pick it, and click Create.

On screen: Root: S.0 Bike-Share Dock → Create.

Holarch draws the dock with the three parts you related in the last chapter. Nothing was drawn by hand: the diagram reads the decomposed by relationships.

On screen: The asset diagram.

Check Performed Actions, and each part lists the functions it performs. That is the allocation from the last chapter, now on the picture.

On screen: Performed Actions.

Add to the model on the diagram

The back office service is outside the dock, but the kiosk talks to it. Click Asset, choose Existing Asset Outside the Root, and pick Back Office Service. It appears outside the dock's border.

On screen: + Asset ▾ → Existing Asset Outside the Root… → S.4.

A conduit is a physical or data link between assets. Click Conduit, connect the kiosk to the back office service, name the link Cellular Data Link, and click Create.

On screen: + Conduit → Kiosk → Back Office Service → Cellular Data Link.

The Arrange menu tidies the picture. Click Arrange, then Tidy Layout.

On screen: Arrange ▾ → Tidy Layout.

New parts can be added on the diagram too. Click Asset, choose New Child Asset, and create the dock's power supply.

On screen: + Asset ▾ → New Child Asset… → S.5 Power Supply.

Connect it to the charging unit with a second conduit, the Power Cable, and lay the diagram out again.

On screen: + Conduit → Power Supply → Charging Unit → Power Cable; Tidy Layout.

One model, many views

Now select the kiosk. The inspector shows the same item you created in the Database. Rename it Rental Kiosk.

On screen: Select Kiosk → inspector → Rental Kiosk.

Open the Database. The kiosk is renamed there too, and the power supply and both conduits are new rows. There is only one model, and the diagram is one view of it.

On screen: Database: Rental Kiosk, Power Supply, conduits.

The same items can be drawn in other ways. Go back to the diagram's tab, and switch its type at the top to Hierarchy Diagram: the dock's breakdown as a tree.

On screen: Back to the diagram → type: Hierarchy Diagram.

A spider diagram follows the links outward from one item. On the Diagrams page, click New Diagram, choose Spider Diagram, and make the requirement Unlock a Bike its root.

On screen: Diagrams → + New Diagram → Spider → root 1.1.

Set the level to two. It shows the requirement, the need it traces to, the function that satisfies it, and the part that performs that function: the traceability you built, on one page.

On screen: Level 2.

Every diagram can be exported with Export: as a picture, a Word document, a web page or a print, for a report or a review.

On screen: Export… dialog.

Recap

Let's recap. You created an asset diagram from the dock, saw its parts and functions drawn from the model, added an external system, a part and two conduits, renamed a part on the diagram, and viewed the same items as a hierarchy and a spider diagram.

Next, you write a requirements document whose requirements are items of this same model.