פרקי הקורס
הדרכה · מסלול 1. תחילת עבודה · פרק 1.4 מתוך 8
1.4 הדיאגרמה הראשונה שלכם 4:00
משרטטים את המודל, מוסיפים לו מתוך הדיאגרמה ורואים מודל אחד בכל תצוגה.
מציג את Holarch 1.27.
מה תלמדו
- ליצור דיאגרמת Asset של מערכת מ“+ דיאגרמה חדשה”
- להציג בדיאגרמה את הפונקציות שכל חלק מבצע
- להוסיף חלק ו-Conduit בדיאגרמה ולמצוא אותם במסד הנתונים
- להחליף את סוג הדיאגרמה כדי לראות את אותם פריטים כהיררכיה
- לבנות דיאגרמת Spider שמציגה את העקיבות סביב דרישה אחת
יוצרים דיאגרמת Asset של Bike-Share Dock מפריט המערכת הקיים: Holarch משרטט את החלקים שלה ואת הפונקציות שלהם מתוך הקשרים. מוסיפים את המשרד האחורי החיצוני ו-Conduit, חלק חדש וכבל חשמל, משנים שם של חלק בדיאגרמה ורואים את השינוי במסד הנתונים, ואז רואים את אותם פריטים כהיררכיה ועוקבים אחרי דרישה עם דיאגרמת Spider.
קובצי פרויקט
- פרויקט התחלה (.holarch.json; ניהול פרויקטים ← קובצי פרויקט ▾ ← ייבוא פרויקט (.json)…)
- פרויקט גמור (.holarch.json; ניהול פרויקטים ← קובצי פרויקט ▾ ← ייבוא פרויקט (.json)…)
הסרטון מוצג מ-holarch.app; ראו את מדיניות הפרטיות.
תרגול
עשו זאת בעצמכם ב-Holarch, על פרויקט ההדגמה CubeSat EO-1.
- פותחים את פרויקט ההדגמה EO-1 (או יוצרים אותו: ניהול פרויקטים ← קובצי פרויקט ▾ ← פרויקט הדגמה חדש ← CubeSat (הנדסת מערכות מודרכת)).
- לוחצים על דיאגרמות בתחתית פס הניווט, ואז על + דיאגרמה חדשה. בוחרים דיאגרמת Asset, מקלידים
EPSב-דיאגרמה של, בוחרים 1.3 EPS ולוחצים על יצירה. מפעילים את Actions מבוצעות כדי לראות איזו פונקציה כל חלק מבצע. - בוחרים + נכס ▾ ← Asset צאצא חדש… ויוצרים את
Battery Heater. לוחצים על ⋯ (פעולות נוספות) בסרגל הכלים של הדיאגרמה, ואז על + Conduit: מ-Battery Pack אל Battery Heater, בשםHeater Power Line. אחר כך בוחרים סידור ▾ ← סידור הפריסה. - פותחים את מסד הנתונים ומוצאים את Battery Heater ואת Heater Power Line כשורות חדשות.
- חוזרים לכרטיסיית הדיאגרמה ומחליפים את הסוג ל-דיאגרמת היררכיה בבורר הסוג.
- יוצרים דיאגרמת Spider של 3.2 Battery Capacity ומשאירים את הרמה על 2.
סיימתם כשדיאגרמת ה-Spider של 3.2 מציגה את Battery Pack שמקיים אותה ואת TC-07 Battery Capacity Test שמאמת אותה.
בדיקה עצמית
- לא מוחקים דבר, אבל משנים שם של חלק בדיאגרמה. איפה עוד מופיע השם החדש?
- למה דיאגרמת Asset חדשה של 1.3 EPS כבר מציגה שלושה חלקים?
- מתי דיאגרמת Spider שימושית יותר מדיאגרמת Asset?
הצגת התשובות
לא מוחקים דבר, אבל משנים שם של חלק בדיאגרמה. איפה עוד מופיע השם החדש?
בכל מקום שבו הפריט מופיע: מסד הנתונים, מסמכים, דיאגרמות אחרות וחלונית המאפיינים. דיאגרמה היא תצוגה של המודל, לא שרטוט נפרד.
למה דיאגרמת Asset חדשה של 1.3 EPS כבר מציגה שלושה חלקים?
הדיאגרמה קוראת את קשרי decomposed by שכבר קיימים במודל, ולכן החלקים משורטטים בלי מיקום ידני.
מתי דיאגרמת Spider שימושית יותר מדיאגרמת Asset?
כשרוצים את העקיבות סביב פריט אחד בכל סוגי הקשרים: הצורך, הפונקציה, החלק והבדיקה, למשל כדי להעריך את ההשפעה של שינוי.
קריאה נוספת
תמליל
הצגת התמליל (הקריינות ומה שמוצג על המסך)
Introduction
Chapter four: your first diagram. In Holarch a diagram is a view of the model. It draws items and relationships that already exist, and whatever you add on a diagram goes into the model.
We continue with the Bike-Share Dock, whose parts and functions we related in the last chapter.
Create a diagram
Open Diagrams at the bottom of the rail. It lists every diagram in the project. None is saved yet, but Holarch already offers derived views of the dock, because the dock has parts.
On screen: Diagrams page: derived views only.
Click New Diagram, and pick the type. An Asset Diagram shows a system and its parts.
On screen: + New Diagram → Asset Diagram.
Then choose the root, the item the diagram is about. Type the first letters of Bike-Share Dock, pick it, and click Create.
On screen: Root: S.0 Bike-Share Dock → Create.
Holarch draws the dock with the three parts you related in the last chapter. Nothing was drawn by hand: the diagram reads the decomposed by relationships.
On screen: The asset diagram.
Check Performed Actions, and each part lists the functions it performs. That is the allocation from the last chapter, now on the picture.
On screen: Performed Actions.
Add to the model on the diagram
The back office service is outside the dock, but the kiosk talks to it. Click Asset, choose Existing Asset Outside the Root, and pick Back Office Service. It appears outside the dock's border.
On screen: + Asset ▾ → Existing Asset Outside the Root… → S.4.
A conduit is a physical or data link between assets. Click Conduit, connect the kiosk to the back office service, name the link Cellular Data Link, and click Create.
On screen: + Conduit → Kiosk → Back Office Service → Cellular Data Link.
The Arrange menu tidies the picture. Click Arrange, then Tidy Layout.
On screen: Arrange ▾ → Tidy Layout.
New parts can be added on the diagram too. Click Asset, choose New Child Asset, and create the dock's power supply.
On screen: + Asset ▾ → New Child Asset… → S.5 Power Supply.
Connect it to the charging unit with a second conduit, the Power Cable, and lay the diagram out again.
On screen: + Conduit → Power Supply → Charging Unit → Power Cable; Tidy Layout.
One model, many views
Now select the kiosk. The inspector shows the same item you created in the Database. Rename it Rental Kiosk.
On screen: Select Kiosk → inspector → Rental Kiosk.
Open the Database. The kiosk is renamed there too, and the power supply and both conduits are new rows. There is only one model, and the diagram is one view of it.
On screen: Database: Rental Kiosk, Power Supply, conduits.
The same items can be drawn in other ways. Go back to the diagram's tab, and switch its type at the top to Hierarchy Diagram: the dock's breakdown as a tree.
On screen: Back to the diagram → type: Hierarchy Diagram.
A spider diagram follows the links outward from one item. On the Diagrams page, click New Diagram, choose Spider Diagram, and make the requirement Unlock a Bike its root.
On screen: Diagrams → + New Diagram → Spider → root 1.1.
Set the level to two. It shows the requirement, the need it traces to, the function that satisfies it, and the part that performs that function: the traceability you built, on one page.
On screen: Level 2.
Every diagram can be exported with Export: as a picture, a Word document, a web page or a print, for a report or a review.
On screen: Export… dialog.
Recap
Let's recap. You created an asset diagram from the dock, saw its parts and functions drawn from the model, added an external system, a part and two conduits, renamed a part on the diagram, and viewed the same items as a hierarchy and a spider diagram.
Next, you write a requirements document whose requirements are items of this same model.