課程章節
培訓 · 第 1 單元:入門 · 第 1.4 章,共 8 章
1.4 您的第一張圖 4:00
繪製模型、在圖上增加內容,並在每個檢視中看到同一個模型。
展示 Holarch 1.27。
您將學到
- 從「+ 新增圖」建立系統的 Asset 圖
- 在圖上顯示每個零件執行的功能
- 在圖上新增零件與管道,並在資料庫中找到它們
- 切換圖的類型,以階層方式檢視相同的項目
- 建立顯示某個需求周圍追溯的 Spider 圖
從現有的系統項目建立 Bike-Share Dock 的 Asset 圖:Holarch 會依據關係畫出其零件與功能。新增外部後台辦公室與一條管道、一個新零件與一條電源線,在圖上重新命名一個零件並在資料庫中看到變更,然後以階層方式檢視相同的項目,並以 Spider 圖追溯一個需求。
練習
在 Holarch 中於 CubeSat EO-1 示範專案上親自操作。
- 開啟您的 EO-1 示範專案(或建立它:管理專案 → 專案檔案 ▾ → 新增示範專案 → CubeSat(引導式系統工程))。
- 按一下導覽列底部的圖,然後按 + 新增圖。選擇 Asset 圖,在圖的對象中輸入
EPS,挑選 1.3 EPS,然後按一下建立。開啟執行的 Action,以查看每個零件執行哪項功能。 - 選擇 + Asset ▾ → 新增子 Asset…,並建立
Battery Heater。按一下圖工具列中的 ⋯(更多動作),然後按 + Conduit:從 Battery Pack 到 Battery Heater,命名為Heater Power Line。接著選擇排列 ▾ → 整理版面配置。 - 開啟資料庫,找到以新列出現的 Battery Heater 與 Heater Power Line。
- 回到圖的分頁,以類型選擇器將類型切換為階層圖。
- 建立 3.2 Battery Capacity 的 Spider 圖,並將層級保留為 2。
當 3.2 的 Spider 圖顯示滿足它的 Battery Pack,以及驗證它的 TC-07 Battery Capacity Test 時,即完成。
自我檢查
- 您沒有刪除任何內容,只是在圖上重新命名了一個零件。新名稱還會出現在哪裡?
- 為什麼 1.3 EPS 的新 Asset 圖已經顯示三個零件?
- 什麼時候 Spider 圖比 Asset 圖更有用?
顯示答案
您沒有刪除任何內容,只是在圖上重新命名了一個零件。新名稱還會出現在哪裡?
在該項目出現的每個地方:資料庫、文件、其他圖與屬性面板。圖是模型的檢視,而不是另外的繪圖。
為什麼 1.3 EPS 的新 Asset 圖已經顯示三個零件?
圖會讀取模型中已存在的 decomposed by 關係,因此不需手動擺放就能畫出零件。
什麼時候 Spider 圖比 Asset 圖更有用?
當您想看一個項目跨各種關係類型的追溯時:需要、功能、零件與測試,例如用來判斷變更的影響。
延伸閱讀
文字稿
顯示文字稿 (旁白與畫面內容)
Introduction
Chapter four: your first diagram. In Holarch a diagram is a view of the model. It draws items and relationships that already exist, and whatever you add on a diagram goes into the model.
We continue with the Bike-Share Dock, whose parts and functions we related in the last chapter.
Create a diagram
Open Diagrams at the bottom of the rail. It lists every diagram in the project. None is saved yet, but Holarch already offers derived views of the dock, because the dock has parts.
On screen: Diagrams page: derived views only.
Click New Diagram, and pick the type. An Asset Diagram shows a system and its parts.
On screen: + New Diagram → Asset Diagram.
Then choose the root, the item the diagram is about. Type the first letters of Bike-Share Dock, pick it, and click Create.
On screen: Root: S.0 Bike-Share Dock → Create.
Holarch draws the dock with the three parts you related in the last chapter. Nothing was drawn by hand: the diagram reads the decomposed by relationships.
On screen: The asset diagram.
Check Performed Actions, and each part lists the functions it performs. That is the allocation from the last chapter, now on the picture.
On screen: Performed Actions.
Add to the model on the diagram
The back office service is outside the dock, but the kiosk talks to it. Click Asset, choose Existing Asset Outside the Root, and pick Back Office Service. It appears outside the dock's border.
On screen: + Asset ▾ → Existing Asset Outside the Root… → S.4.
A conduit is a physical or data link between assets. Click Conduit, connect the kiosk to the back office service, name the link Cellular Data Link, and click Create.
On screen: + Conduit → Kiosk → Back Office Service → Cellular Data Link.
The Arrange menu tidies the picture. Click Arrange, then Tidy Layout.
On screen: Arrange ▾ → Tidy Layout.
New parts can be added on the diagram too. Click Asset, choose New Child Asset, and create the dock's power supply.
On screen: + Asset ▾ → New Child Asset… → S.5 Power Supply.
Connect it to the charging unit with a second conduit, the Power Cable, and lay the diagram out again.
On screen: + Conduit → Power Supply → Charging Unit → Power Cable; Tidy Layout.
One model, many views
Now select the kiosk. The inspector shows the same item you created in the Database. Rename it Rental Kiosk.
On screen: Select Kiosk → inspector → Rental Kiosk.
Open the Database. The kiosk is renamed there too, and the power supply and both conduits are new rows. There is only one model, and the diagram is one view of it.
On screen: Database: Rental Kiosk, Power Supply, conduits.
The same items can be drawn in other ways. Go back to the diagram's tab, and switch its type at the top to Hierarchy Diagram: the dock's breakdown as a tree.
On screen: Back to the diagram → type: Hierarchy Diagram.
A spider diagram follows the links outward from one item. On the Diagrams page, click New Diagram, choose Spider Diagram, and make the requirement Unlock a Bike its root.
On screen: Diagrams → + New Diagram → Spider → root 1.1.
Set the level to two. It shows the requirement, the need it traces to, the function that satisfies it, and the part that performs that function: the traceability you built, on one page.
On screen: Level 2.
Every diagram can be exported with Export: as a picture, a Word document, a web page or a print, for a report or a review.
On screen: Export… dialog.
Recap
Let's recap. You created an asset diagram from the dock, saw its parts and functions drawn from the model, added an external system, a part and two conduits, renamed a part on the diagram, and viewed the same items as a hierarchy and a spider diagram.
Next, you write a requirements document whose requirements are items of this same model.