Holarch
Kurskapitel

Schulung · Reihe 1. Erste Schritte · Kapitel 1.4 von 8

1.4 Ihr erstes Diagramm 4:00

Das Modell zeichnen, es im Diagramm erweitern und ein Modell in jeder Ansicht sehen.

Zeigt Holarch 1.27.

← 1.3 Attribute und Beziehungen · Alle Kapitel · 1.5 Dokumente →

Das lernen Sie

  • Über + Neues Diagramm ein Asset-Diagramm eines Systems erstellen
  • Im Diagramm die Funktionen zeigen, die jeder Teil ausführt
  • Im Diagramm einen Teil und einen Conduit hinzufügen und sie in der Datenbank finden
  • Den Typ eines Diagramms umstellen, um dieselben Elemente als Hierarchie zu sehen
  • Ein Spinnendiagramm erstellen, das die Nachverfolgung um eine Anforderung zeigt

Erstellen Sie aus dem vorhandenen Systemelement ein Asset-Diagramm des Bike-Share Dock: Holarch zeichnet seine Teile und deren Funktionen aus den Beziehungen. Fügen Sie das externe Backoffice und einen Conduit, einen neuen Teil und ein Stromkabel hinzu, benennen Sie einen Teil im Diagramm um und sehen Sie die Änderung in der Datenbank, betrachten Sie dann dieselben Elemente als Hierarchie und verfolgen Sie eine Anforderung mit einem Spinnendiagramm nach.

Projektdateien

  • Startprojekt (.holarch.json; Projekte verwalten → Projektdateien ▾ → Projekt importieren (.json)…)
  • Fertiges Projekt (.holarch.json; Projekte verwalten → Projektdateien ▾ → Projekt importieren (.json)…)

Das Video wird von holarch.app abgespielt; siehe Datenschutzerklärung.

Übung

Führen Sie dies selbst in Holarch durch, am Demoprojekt CubeSat EO-1.

  1. Öffnen Sie Ihr EO-1-Demoprojekt (oder erstellen Sie es: Projekte verwalten → Projektdateien ▾ → Neues Demoprojekt → CubeSat (Geführtes Systems Engineering)).
  2. Klicken Sie unten in der Seitenleiste auf Diagramme und dann auf + Neues Diagramm. Wählen Sie Asset-Diagramm, geben Sie EPS in Diagramm von ein, wählen Sie 1.3 EPS und klicken Sie auf Erstellen. Schalten Sie Ausgeführte Actions ein, um zu sehen, welche Funktion jeder Teil ausführt.
  3. Wählen Sie + Asset ▾ → Neues untergeordnetes Asset… und erstellen Sie Battery Heater. Klicken Sie in der Diagramm-Symbolleiste auf ⋯ (Weitere Aktionen) und dann auf + Conduit: von Battery Pack zu Battery Heater, mit dem Namen Heater Power Line. Wählen Sie dann Anordnen ▾ → Layout aufräumen.
  4. Öffnen Sie die Datenbank und finden Sie Battery Heater und Heater Power Line als neue Zeilen.
  5. Stellen Sie zurück auf der Registerkarte des Diagramms den Typ mit der Typauswahl auf Hierarchiediagramm um.
  6. Erstellen Sie ein Spinnendiagramm von 3.2 Battery Capacity und belassen Sie die Ebene auf 2.

Sie sind fertig, wenn das Spinnendiagramm von 3.2 das Battery Pack zeigt, das sie erfüllt, und den TC-07 Battery Capacity Test, der sie verifiziert.

Selbsttest

  1. Sie löschen nichts, benennen aber einen Teil in einem Diagramm um. Wo erscheint der neue Name noch?
  2. Warum zeigt ein neues Asset-Diagramm von 1.3 EPS bereits drei Teile?
  3. Wann ist ein Spinnendiagramm nützlicher als ein Asset-Diagramm?
Antworten anzeigen
  1. Sie löschen nichts, benennen aber einen Teil in einem Diagramm um. Wo erscheint der neue Name noch?

    Überall, wo das Element erscheint: in der Datenbank, in Dokumenten, anderen Diagrammen und im Inspektor. Ein Diagramm ist eine Ansicht des Modells, keine separate Zeichnung.

  2. Warum zeigt ein neues Asset-Diagramm von 1.3 EPS bereits drei Teile?

    Das Diagramm liest die decomposed-by-Beziehungen, die bereits im Modell existieren, daher werden die Teile ohne manuelles Platzieren gezeichnet.

  3. Wann ist ein Spinnendiagramm nützlicher als ein Asset-Diagramm?

    Wenn Sie die Nachverfolgung um ein Element über Beziehungstypen hinweg sehen wollen: den Bedarf, die Funktion, den Teil und den Test, etwa um die Auswirkung einer Änderung zu beurteilen.

Weiterlesen

Transkript

Transkript anzeigen (Erzählung und Bildschirminhalt)

Introduction

Chapter four: your first diagram. In Holarch a diagram is a view of the model. It draws items and relationships that already exist, and whatever you add on a diagram goes into the model.

We continue with the Bike-Share Dock, whose parts and functions we related in the last chapter.

Create a diagram

Open Diagrams at the bottom of the rail. It lists every diagram in the project. None is saved yet, but Holarch already offers derived views of the dock, because the dock has parts.

On screen: Diagrams page: derived views only.

Click New Diagram, and pick the type. An Asset Diagram shows a system and its parts.

On screen: + New Diagram → Asset Diagram.

Then choose the root, the item the diagram is about. Type the first letters of Bike-Share Dock, pick it, and click Create.

On screen: Root: S.0 Bike-Share Dock → Create.

Holarch draws the dock with the three parts you related in the last chapter. Nothing was drawn by hand: the diagram reads the decomposed by relationships.

On screen: The asset diagram.

Check Performed Actions, and each part lists the functions it performs. That is the allocation from the last chapter, now on the picture.

On screen: Performed Actions.

Add to the model on the diagram

The back office service is outside the dock, but the kiosk talks to it. Click Asset, choose Existing Asset Outside the Root, and pick Back Office Service. It appears outside the dock's border.

On screen: + Asset ▾ → Existing Asset Outside the Root… → S.4.

A conduit is a physical or data link between assets. Click Conduit, connect the kiosk to the back office service, name the link Cellular Data Link, and click Create.

On screen: + Conduit → Kiosk → Back Office Service → Cellular Data Link.

The Arrange menu tidies the picture. Click Arrange, then Tidy Layout.

On screen: Arrange ▾ → Tidy Layout.

New parts can be added on the diagram too. Click Asset, choose New Child Asset, and create the dock's power supply.

On screen: + Asset ▾ → New Child Asset… → S.5 Power Supply.

Connect it to the charging unit with a second conduit, the Power Cable, and lay the diagram out again.

On screen: + Conduit → Power Supply → Charging Unit → Power Cable; Tidy Layout.

One model, many views

Now select the kiosk. The inspector shows the same item you created in the Database. Rename it Rental Kiosk.

On screen: Select Kiosk → inspector → Rental Kiosk.

Open the Database. The kiosk is renamed there too, and the power supply and both conduits are new rows. There is only one model, and the diagram is one view of it.

On screen: Database: Rental Kiosk, Power Supply, conduits.

The same items can be drawn in other ways. Go back to the diagram's tab, and switch its type at the top to Hierarchy Diagram: the dock's breakdown as a tree.

On screen: Back to the diagram → type: Hierarchy Diagram.

A spider diagram follows the links outward from one item. On the Diagrams page, click New Diagram, choose Spider Diagram, and make the requirement Unlock a Bike its root.

On screen: Diagrams → + New Diagram → Spider → root 1.1.

Set the level to two. It shows the requirement, the need it traces to, the function that satisfies it, and the part that performs that function: the traceability you built, on one page.

On screen: Level 2.

Every diagram can be exported with Export: as a picture, a Word document, a web page or a print, for a report or a review.

On screen: Export… dialog.

Recap

Let's recap. You created an asset diagram from the dock, saw its parts and functions drawn from the model, added an external system, a part and two conduits, renamed a part on the diagram, and viewed the same items as a hierarchy and a spider diagram.

Next, you write a requirements document whose requirements are items of this same model.