פרקי הקורס
הדרכה · מסלול 14. גיליונות אלקטרוניים · פרק 14.4 מתוך 5
14.4 תרשימים ונתוני מודל 2:47
יוצרים תרשים מטווח ומעצבים את הציר שלו, מוסיפים טבלת מודל חיה וקוראים ערכי מודל עם SUMIFS ו-HOLARCH.VALUE.
מציג את Holarch 2.35.
מה תלמדו
- ליצור תרשים מטווח ולהזיז את התרשים לצד הנתונים
- להגדיר גבולות ויחידות של ציר ב“עיצוב ציר”
- להוסיף טבלת מודל של נתוני מודל חיים
- לסכם ערכי מודל עם SUMIFS ולקרוא ערך אחד עם HOLARCH.VALUE
- לראות שינוי במודל זורם לגיליון ולתרשים
יוצרים תרשים לתקציב המסה של EO-1 ומחברים אותו למודל: מוסיפים תרשים עמודות של מסות תת-המערכות ומגדירים את ציר הערכים שלו ב“עיצוב ציר”, מוסיפים טבלת מודל חיה לקריאה בלבד של כל הנכסים עם המספר והמסה שלהם, מחליפים את ההערכות שהוקלדו ב-SUMIFS על הטבלה, קוראים את הקצאת המסה מהמודל עם HOLARCH.VALUE, ואז משנים מסה במודל ורואים את התקציב מתעדכן בהתאם.
קובצי פרויקט
- פרויקט התחלה (.holarch.json; ניהול פרויקטים ← קובצי פרויקט ▾ ← ייבוא פרויקט (.json)…)
- פרויקט גמור (.holarch.json; ניהול פרויקטים ← קובצי פרויקט ▾ ← ייבוא פרויקט (.json)…)
הסרטון מוצג מ-holarch.app; ראו את מדיניות הפרטיות.
תרגול
עושים את זה בעצמכם ב-Holarch, על CubeSat EO-1.
- פותחים את קובץ ההתחלה של הפרק, או את חוברת העבודה שלכם מפרק 14.3.
- בוחרים את B2:C8, פותחים את תרשים ובוחרים עמודה. גוררים את התרשים לימין התקציב.
- לוחצים לחיצה ימנית על התרשים, בוחרים עיצוב הציר האנכי…, מגדירים את המקסימום ל-
5ואת היחידה הראשית ל-1. - מוסיפים גיליון בשם
Model. ב-A1 לוחצים על טבלת מודל…, בוחרים את המחלקה נכס, מסמנים מספר ו-Mass, נותנים לה את השםPartsולוחצים על הוספה. - בגיליון תקציב מקלידים
=SUMIFS(Parts[Mass],Parts[Number],A3&"*")ב-C3 וממלאים כלפי מטה עד C8. בגיליון Assumptions מקלידים=HOLARCH.VALUE("Spacecraft Mass","Threshold Value","kg")ב-B1. - במסד הנתונים משנים את המסה של Payload Camera מ-2.4 ל-2.9 kg וחוזרים לגיליון האלקטרוני.
סיימתם כשהמסות מגיעות מהמודל, ההקצאה קוראת 12 מהמודל, והסכומים, המרווח והתרשים מתעדכנים לפי השינוי ב-Payload Camera.
בדיקה עצמית
- האם גיליון אלקטרוני יכול לשנות את המודל?
- למה מתאים A3&"*" בקריטריונים של SUMIFS?
- איפה מגדירים את המקסימום ואת היחידה הראשית של ציר בתרשים?
הצגת התשובות
האם גיליון אלקטרוני יכול לשנות את המודל?
לא. טבלאות מודל ופונקציות HOLARCH קוראות את המודל; הגיליון האלקטרוני אף פעם לא כותב אליו.
למה מתאים A3&"*" בקריטריונים של SUMIFS?
כל מספר חלק שמתחיל במספר של תת-המערכת, כמו 1.1.1 ו-1.1.2 עבור 1.1.
איפה מגדירים את המקסימום ואת היחידה הראשית של ציר בתרשים?
ב“עיצוב ציר”, שנפתח מתפריט הלחיצה הימנית של התרשים; תיבה ריקה משאירה את הערך אוטומטי.
קריאה נוספת
תמליל
הצגת התמליל (הקריינות ומה שמוצג על המסך)
Introduction
Chapter four: charts and model data. A chart shows the budget at a glance. And a spreadsheet can read the model, so the budget stays current without retyping.
In this chapter you chart the budget, then feed it from the model.
Charts
Select the subsystems and their masses, B2 to C8. Open Chart, and choose Column.
On screen: Name Box B2:C8 → Chart ▾ → Column.
The chart floats over the sheet. Drag it to the right of the budget, so the totals stay in view.
On screen: Drag the chart right of column E.
The chart follows its cells. Right-click it for its menu, and choose Format Vertical Axis.
On screen: Right-click the chart → Format Vertical Axis….
Format Axis sets the bounds and units. Set the maximum to five and the major unit to one. Leave a box empty to keep it automatic. Close the panel.
On screen: Maximum 5, Major 1 → close.
Model data
The masses so far are typed estimates. The model holds the current mass of every component, so read them from there. Add a sheet, and name it Model.
On screen: + → Model.
Select A1, and click Model Table. Choose the class Asset, tick Number and Mass, name the table Parts, and click Insert.
On screen: A1 → Model Table… → Class Asset; Number, Mass; name Parts → Insert.
The table lists every asset with its number and mass, live and read-only. A spreadsheet reads the model, and never writes to it.
On screen: The Parts table.
Back in the budget, replace the estimate in C3. The SUMIFS function adds the masses of the parts whose number starts with the subsystem's number.
On screen: Budget → C3: =SUMIFS(Parts[Mass],Parts[Number],A3&"*") ↵.
Fill it down to C8. Every subsystem now adds up its components from the model.
On screen: Name Box C3:C8 → Fill ▾ → Fill Down.
HOLARCH.VALUE reads one value of one item, in the unit you ask for. On the Assumptions sheet, the allocation becomes the threshold of the spacecraft mass measure in the model.
On screen: Assumptions → B1: =HOLARCH.VALUE("Spacecraft Mass","Threshold Value","kg") ↵.
The sheet follows the model
Now change the model. In the Database, open the payload camera's mass, and change it from two point four to two point nine kilograms.
On screen: Database → Payload Camera → Mass 2.4 → 2.9.
Back in the spreadsheet, with its editor tab. The payload camera's mass, the totals, the margin and the chart have all followed, with no edit to the sheet.
On screen: Editor tab → Budget: 2.90 kg, totals, margin, chart.
Recap
To recap: chart a range and format its axis, insert a Model Table for live model data, sum it with SUMIFS, and read single values with HOLARCH.VALUE.
In the last chapter, you import an Excel workbook and get AI help with formulas.