Holarch
Course chapters

Training · Track 13. Whiteboards · Chapter 13.2 of 4

13.2 Curves and Line Labels 3:09

Shape a curved line by its peak, square its ends to the shapes, and place, rotate and delete labels.

Shows Holarch 2.35.

What you’ll learn

  • Draw a curved line and place its peak with the yellow diamond, snapping it to the middle
  • Bend or flatten a curve, and set Curve and Peak position in the Line panel
  • Square a line's ends to the edges of its shapes
  • Add, move, rotate and delete line labels

Shape lines on the Bike-Share Dock concept board: draw a curved arrow, move the peak of the curve along the line with the yellow diamond (it snaps to the middle), bend it more or less, set Curve and Peak position in the Line panel, square the ends to the edges they meet so the curve leaves each shape at a right angle, then add line labels, move them along and off the line, rotate them with snapping, make them follow the line and delete them.

Project files

  • Starting project (.holarch.json; Manage Projects → Project Files ▾ → Import Project (.json)…)
  • Finished project (.holarch.json; Manage Projects → Project Files ▾ → Import Project (.json)…)

The video plays from holarch.app; see the Privacy Policy.

Practice

Do this yourself in Holarch, on Bike-Share Dock.

  1. Open the chapter's starting file and the Dock Concept whiteboard.
  2. Press A, choose Curved in the Line options bar and drag from the rider to the docking bay.
  3. Drag the yellow diamond toward one end, then back until it snaps to the middle. Drag it away from the line with Shift held.
  4. In the inspector's Line section, tick Square to the edge for Start and End, then move the rider.
  5. Double-click the line, type returns a bike and press Enter. Drag the label along the line, away from it, and back on; rotate it with its round knob.
  6. Add a second label and delete it with its ×.

You're done when the curved arrow meets both shapes square to their edges and carries one label that follows the line.

Check yourself

  1. What does the yellow diamond on a curved line show?
  2. How do you place the peak anywhere without the snap to the middle?
  3. What keeps a label turned along its line when the line moves?
Show the answers
  1. What does the yellow diamond on a curved line show?

    The peak: the point of the curve farthest from the straight line between its ends. Dragging it along the line moves the peak; dragging it away bends the curve more.

  2. How do you place the peak anywhere without the snap to the middle?

    Hold Command (Mac) or Control while you drag the diamond.

  3. What keeps a label turned along its line when the line moves?

    Follow the line, in the label's row of the Line panel.

Read more

Transcript

Show the transcript (narration and what is on screen)

Introduction

Chapter two: curves and line labels. A curved line is often the clearest way to show a flow that loops around other shapes, and a label says what the line means.

In this chapter you draw a curved arrow, shape it, and label it.

A curved line

The rider returns the bike at a docking bay. Press the A key, choose Curved in the Line options bar, and drag from the rider to the docking bay.

On screen: A → Curved → drag Rider → Docking Bay.

The new line is selected. The yellow diamond sits on the peak of the curve: the point farthest from a straight line between its ends.

On screen: The curve handle on the peak.

The peak

Drag the diamond along the line toward the docking bay. The peak moves toward that end, and the curve stays one smooth arc.

On screen: Drag the peak toward the docking bay.

Drag it back. Near the middle, it snaps to the center, and a guide shows it. Hold Command, or Control, while you drag to place it anywhere.

On screen: Drag the peak back; it snaps to the middle.

Drag the diamond away from the line to bend the curve more, or toward it to flatten it. With Shift held, only the bend changes.

On screen: Drag the peak outward.

The Line panel shows the same as numbers: Curve for the bend, and Peak position, from five to ninety-five percent along the line. Center puts the peak back in the middle.

On screen: Line panel: Curve, Peak position, Center.

Square ends

Under Ends, tick End in Square to the edge. The curve now meets the docking bay at a right angle to its edge, and eases into its arc. Tick Start too, for the rider.

On screen: Ends → Square to the edge: End, Start.

The setting stays while the shapes move. Drag the rider: both ends stay square.

On screen: Drag Rider.

Line labels

Now a label. Double-click the line, type returns a bike, and press Enter.

On screen: Double-click the curve → returns a bike → Enter.

Click the label to select it. Drag it along the line: it keeps its place along the line when the line moves.

On screen: Drag the label along the line.

Drag it away from the line, and a thin leader line connects it. Bring it back within a few pixels, and it snaps onto the line again.

On screen: Drag the label off the line, then back.

A selected label shows a round knob. Drag it to rotate the label. It snaps to horizontal, to the line's direction and to fifteen-degree steps.

On screen: Drag the rotate knob to the line's direction.

In the Line panel, each label has its position, offsets and rotation, and Follow the line, which keeps it turned along the line wherever the line goes.

On screen: Line panel → Labels.

A line can have several labels. Double-click near the rider for a second one, type paid by app, and press Enter.

On screen: Double-click the line → paid by app.

To delete a label, click its cross, press Delete while it is selected, or right-click it and choose Delete Label. Delete the second one.

On screen: The label's ×.

Recap

To recap: drag the yellow diamond to place the peak, which snaps to the middle; square the ends in the Line panel; and double-click a line to label it, then move, rotate or delete the label.

In the next chapter, you add charts to the board.