Holarch
Capitoli del corso

Formazione · Percorso 13. Lavagne · Capitolo 13.2 di 4

13.2 Curve ed etichette delle linee 3:09

Modellare una linea curva tramite il suo picco, rendere le estremità perpendicolari alle forme e posizionare, ruotare ed eliminare le etichette.

Mostra Holarch 2.35.

← 13.1 Forme e linee · Tutti i capitoli · 13.3 Grafici →

Che cosa si impara

  • Disegnare una linea curva e posizionarne il picco con il rombo giallo, agganciandolo al centro
  • Accentuare o appiattire una curva e impostare Curva e Posizione del picco nel pannello Linea
  • Rendere le estremità di una linea perpendicolari ai bordi delle sue forme
  • Aggiungere, spostare, ruotare ed eliminare le etichette delle linee

Modellare le linee sulla tavola di concept della Bike-Share Dock: disegnare una freccia curva, spostare il picco della curva lungo la linea con il rombo giallo (si aggancia al centro), curvarla di più o di meno, impostare Curva e Posizione del picco nel pannello Linea, rendere le estremità perpendicolari ai bordi che incontrano in modo che la curva lasci ogni forma ad angolo retto, poi aggiungere etichette alla linea, spostarle lungo la linea e fuori da essa, ruotarle con l’aggancio, far loro seguire la linea ed eliminarle.

File di progetto

  • Progetto iniziale (.holarch.json; Gestisci progetti → File di progetto ▾ → Importa progetto (.json)…)
  • Progetto completato (.holarch.json; Gestisci progetti → File di progetto ▾ → Importa progetto (.json)…)

Il video viene riprodotto da holarch.app; vedere l’Informativa sulla privacy.

Esercitazione

Provare in prima persona in Holarch, su Bike-Share Dock.

  1. Aprire il file iniziale del capitolo e la lavagna Dock Concept.
  2. Premere A, scegliere Curva nella barra delle opzioni della linea e trascinare dal ciclista al vano di aggancio.
  3. Trascinare il rombo giallo verso un’estremità, poi indietro finché non si aggancia al centro. Trascinarlo lontano dalla linea tenendo premuto Maiusc.
  4. Nella sezione Linea dell’ispettore, selezionare Perpendicolare al bordo per Inizio e Fine, poi spostare il ciclista.
  5. Fare doppio clic sulla linea, digitare returns a bike e premere Invio. Trascinare l’etichetta lungo la linea, lontano da essa e di nuovo sopra; ruotarla con la sua manopola rotonda.
  6. Aggiungere una seconda etichetta ed eliminarla con la sua ×.

L’esercizio è completato quando la freccia curva incontra entrambe le forme perpendicolarmente ai loro bordi e porta un’etichetta che segue la linea.

Verifica

  1. Che cosa indica il rombo giallo su una linea curva?
  2. Come si posiziona il picco in un punto qualsiasi senza l’aggancio al centro?
  3. Che cosa mantiene un’etichetta orientata lungo la sua linea quando la linea si sposta?
Mostra le risposte
  1. Che cosa indica il rombo giallo su una linea curva?

    Il picco: il punto della curva più lontano dalla retta tra le sue estremità. Trascinarlo lungo la linea sposta il picco; trascinarlo lontano accentua la curva.

  2. Come si posiziona il picco in un punto qualsiasi senza l’aggancio al centro?

    Tenere premuto Comando (Mac) o Ctrl mentre si trascina il rombo.

  3. Che cosa mantiene un’etichetta orientata lungo la sua linea quando la linea si sposta?

    Segui la linea, nella riga dell’etichetta del pannello Linea.

Per saperne di più

Trascrizione

Mostra la trascrizione (narrazione e contenuto dello schermo)

Introduction

Chapter two: curves and line labels. A curved line is often the clearest way to show a flow that loops around other shapes, and a label says what the line means.

In this chapter you draw a curved arrow, shape it, and label it.

A curved line

The rider returns the bike at a docking bay. Press the A key, choose Curved in the Line options bar, and drag from the rider to the docking bay.

On screen: A → Curved → drag Rider → Docking Bay.

The new line is selected. The yellow diamond sits on the peak of the curve: the point farthest from a straight line between its ends.

On screen: The curve handle on the peak.

The peak

Drag the diamond along the line toward the docking bay. The peak moves toward that end, and the curve stays one smooth arc.

On screen: Drag the peak toward the docking bay.

Drag it back. Near the middle, it snaps to the center, and a guide shows it. Hold Command, or Control, while you drag to place it anywhere.

On screen: Drag the peak back; it snaps to the middle.

Drag the diamond away from the line to bend the curve more, or toward it to flatten it. With Shift held, only the bend changes.

On screen: Drag the peak outward.

The Line panel shows the same as numbers: Curve for the bend, and Peak position, from five to ninety-five percent along the line. Center puts the peak back in the middle.

On screen: Line panel: Curve, Peak position, Center.

Square ends

Under Ends, tick End in Square to the edge. The curve now meets the docking bay at a right angle to its edge, and eases into its arc. Tick Start too, for the rider.

On screen: Ends → Square to the edge: End, Start.

The setting stays while the shapes move. Drag the rider: both ends stay square.

On screen: Drag Rider.

Line labels

Now a label. Double-click the line, type returns a bike, and press Enter.

On screen: Double-click the curve → returns a bike → Enter.

Click the label to select it. Drag it along the line: it keeps its place along the line when the line moves.

On screen: Drag the label along the line.

Drag it away from the line, and a thin leader line connects it. Bring it back within a few pixels, and it snaps onto the line again.

On screen: Drag the label off the line, then back.

A selected label shows a round knob. Drag it to rotate the label. It snaps to horizontal, to the line's direction and to fifteen-degree steps.

On screen: Drag the rotate knob to the line's direction.

In the Line panel, each label has its position, offsets and rotation, and Follow the line, which keeps it turned along the line wherever the line goes.

On screen: Line panel → Labels.

A line can have several labels. Double-click near the rider for a second one, type paid by app, and press Enter.

On screen: Double-click the line → paid by app.

To delete a label, click its cross, press Delete while it is selected, or right-click it and choose Delete Label. Delete the second one.

On screen: The label's ×.

Recap

To recap: drag the yellow diamond to place the peak, which snaps to the middle; square the ends in the Line panel; and double-click a line to label it, then move, rotate or delete the label.

In the next chapter, you add charts to the board.