Holarch
פרקי הקורס

הדרכה · מסלול 13. לוחות ציור · פרק 13.2 מתוך 4

13.2 עקומות ותוויות קווים 3:09

מעצבים קו מעוקל לפי השיא שלו, מיישרים את הקצוות שלו בניצב לצורות, וממקמים, מסובבים ומוחקים תוויות.

מציג את Holarch 2.35.

→ 13.1 צורות וקווים · כל הפרקים · 13.3 תרשימים ←

מה תלמדו

  • לשרטט קו מעוקל ולמקם את השיא שלו עם המעוין הצהוב, בהצמדה לאמצע
  • לכופף או ליישר עקומה, ולהגדיר “עקומה” ו“מיקום השיא” בחלונית הקו
  • ליישר את הקצוות של קו בניצב לשוליים של הצורות שלו
  • להוסיף, להזיז, לסובב ולמחוק תוויות קווים

מעצבים קווים בלוח הקונספט של Bike-Share Dock: משרטטים חץ מעוקל, מזיזים את שיא העקומה לאורך הקו עם המעוין הצהוב (הוא נצמד לאמצע), מכופפים אותה יותר או פחות, מגדירים “עקומה” ו“מיקום השיא” בחלונית הקו, מיישרים את הקצוות בניצב לשוליים שהם פוגשים כך שהעקומה יוצאת מכל צורה בזווית ישרה, ואז מוסיפים תוויות קווים, מזיזים אותן לאורך הקו ומחוצה לו, מסובבים אותן עם הצמדה, גורמים להן לעקוב אחרי הקו ומוחקים אותן.

קובצי פרויקט

  • פרויקט התחלה (.holarch.json; ניהול פרויקטים ← קובצי פרויקט ▾ ← ייבוא פרויקט (.json)…)
  • פרויקט גמור (.holarch.json; ניהול פרויקטים ← קובצי פרויקט ▾ ← ייבוא פרויקט (.json)…)

הסרטון מוצג מ-holarch.app; ראו את מדיניות הפרטיות.

תרגול

עושים את זה בעצמכם ב-Holarch, על Bike-Share Dock.

  1. פותחים את קובץ ההתחלה של הפרק ואת לוח הציור Dock Concept.
  2. לוחצים A, בוחרים מעוקל בסרגל אפשרויות הקו וגוררים מהרוכב אל תא העגינה.
  3. גוררים את המעוין הצהוב לכיוון קצה אחד, ואז חזרה עד שהוא נצמד לאמצע. גוררים אותו הרחק מהקו כש-Shift לחוץ.
  4. בסעיף קו של חלונית המאפיינים מסמנים ניצב לקצה עבור התחלה ו-סוף, ואז מזיזים את הרוכב.
  5. לוחצים לחיצה כפולה על הקו, מקלידים returns a bike ולוחצים הזנה. גוררים את התווית לאורך הקו, הרחק ממנו וחזרה עליו; מסובבים אותה עם הידית העגולה שלה.
  6. מוסיפים תווית שנייה ומוחקים אותה עם ה-× שלה.

סיימתם כשהחץ המעוקל פוגש את שתי הצורות בניצב לשוליים שלהן ונושא תווית אחת שעוקבת אחרי הקו.

בדיקה עצמית

  1. מה מציג המעוין הצהוב על קו מעוקל?
  2. איך ממקמים את השיא בכל מקום בלי ההצמדה לאמצע?
  3. מה שומר על תווית מסובבת לאורך הקו שלה כשהקו זז?
הצגת התשובות
  1. מה מציג המעוין הצהוב על קו מעוקל?

    את השיא: הנקודה בעקומה שהכי רחוקה מהקו הישר שבין הקצוות שלה. גרירה שלו לאורך הקו מזיזה את השיא; גרירה שלו הרחק מהקו מכופפת את העקומה יותר.

  2. איך ממקמים את השיא בכל מקום בלי ההצמדה לאמצע?

    מחזיקים את Command ‏(Mac) או את Control בזמן גרירת המעוין.

  3. מה שומר על תווית מסובבת לאורך הקו שלה כשהקו זז?

    “מעקב אחר הקו”, בשורה של התווית בחלונית הקו.

קריאה נוספת

תמליל

הצגת התמליל (הקריינות ומה שמוצג על המסך)

Introduction

Chapter two: curves and line labels. A curved line is often the clearest way to show a flow that loops around other shapes, and a label says what the line means.

In this chapter you draw a curved arrow, shape it, and label it.

A curved line

The rider returns the bike at a docking bay. Press the A key, choose Curved in the Line options bar, and drag from the rider to the docking bay.

On screen: A → Curved → drag Rider → Docking Bay.

The new line is selected. The yellow diamond sits on the peak of the curve: the point farthest from a straight line between its ends.

On screen: The curve handle on the peak.

The peak

Drag the diamond along the line toward the docking bay. The peak moves toward that end, and the curve stays one smooth arc.

On screen: Drag the peak toward the docking bay.

Drag it back. Near the middle, it snaps to the center, and a guide shows it. Hold Command, or Control, while you drag to place it anywhere.

On screen: Drag the peak back; it snaps to the middle.

Drag the diamond away from the line to bend the curve more, or toward it to flatten it. With Shift held, only the bend changes.

On screen: Drag the peak outward.

The Line panel shows the same as numbers: Curve for the bend, and Peak position, from five to ninety-five percent along the line. Center puts the peak back in the middle.

On screen: Line panel: Curve, Peak position, Center.

Square ends

Under Ends, tick End in Square to the edge. The curve now meets the docking bay at a right angle to its edge, and eases into its arc. Tick Start too, for the rider.

On screen: Ends → Square to the edge: End, Start.

The setting stays while the shapes move. Drag the rider: both ends stay square.

On screen: Drag Rider.

Line labels

Now a label. Double-click the line, type returns a bike, and press Enter.

On screen: Double-click the curve → returns a bike → Enter.

Click the label to select it. Drag it along the line: it keeps its place along the line when the line moves.

On screen: Drag the label along the line.

Drag it away from the line, and a thin leader line connects it. Bring it back within a few pixels, and it snaps onto the line again.

On screen: Drag the label off the line, then back.

A selected label shows a round knob. Drag it to rotate the label. It snaps to horizontal, to the line's direction and to fifteen-degree steps.

On screen: Drag the rotate knob to the line's direction.

In the Line panel, each label has its position, offsets and rotation, and Follow the line, which keeps it turned along the line wherever the line goes.

On screen: Line panel → Labels.

A line can have several labels. Double-click near the rider for a second one, type paid by app, and press Enter.

On screen: Double-click the line → paid by app.

To delete a label, click its cross, press Delete while it is selected, or right-click it and choose Delete Label. Delete the second one.

On screen: The label's ×.

Recap

To recap: drag the yellow diamond to place the peak, which snaps to the middle; square the ends in the Line panel; and double-click a line to label it, then move, rotate or delete the label.

In the next chapter, you add charts to the board.