Holarch
Kurs bölümleri

Eğitim · Kurs 13. Beyaz tahtalar · Bölüm 13.2 / 4

13.2 Eğriler ve çizgi etiketleri 3:09

Eğri bir çizgiyi tepe noktasından şekillendirin, uçlarını şekillere dik getirin ve etiketleri yerleştirin, döndürün ve silin.

Holarch 2.35 sürümünü gösterir.

Neler öğreneceksiniz

  • Eğri bir çizgi çizin ve tepe noktasını sarı elmasla yerleştirip ortaya yapıştırın
  • Bir eğriyi bükün veya düzleştirin ve Çizgi panelinde Eğri ve Tepe konumu'nu ayarlayın
  • Bir çizginin uçlarını şekillerinin kenarlarına dik getirin
  • Çizgi etiketleri ekleyin, taşıyın, döndürün ve silin

Bike-Share Dock konsept panosundaki çizgileri şekillendirin: eğri bir ok çizin, eğrinin tepe noktasını sarı elmasla çizgi boyunca taşıyın (ortaya yapışır), daha çok veya daha az bükün, Çizgi panelinde Eğri ve Tepe konumu'nu ayarlayın, uçları karşılaştıkları kenarlara dik getirin ki eğri her şekilden dik açıyla çıksın, ardından çizgi etiketleri ekleyin, onları çizgi boyunca ve çizginin dışına taşıyın, yapıştırmayla döndürün, çizgiyi takip etmelerini sağlayın ve silin.

Proje dosyaları

  • Başlangıç projesi (.holarch.json; Projeleri yönet → Proje dosyaları ▾ → Proje içe aktar (.json)…)
  • Bitmiş proje (.holarch.json; Projeleri yönet → Proje dosyaları ▾ → Proje içe aktar (.json)…)

Video holarch.app'ten oynatılır; bkz. Gizlilik Politikası.

Alıştırma

Bunu Holarch'ta, Bike-Share Dock üzerinde kendiniz yapın.

  1. Bölümün başlangıç dosyasını ve Dock Concept beyaz tahtasını açın.
  2. A'ya basın, Çizgi seçenekleri çubuğunda Eğri'yi seçin ve sürücüden yerleştirme yuvasına sürükleyin.
  3. Sarı elması bir uca doğru sürükleyin, ardından ortaya yapışana kadar geri getirin. Shift basılıyken onu çizgiden uzağa sürükleyin.
  4. Özellik panelinin Çizgi bölümünde Başlangıç ve Bitiş için Kenara dik'i işaretleyin, ardından sürücüyü taşıyın.
  5. Çizgiye çift tıklayın, returns a bike yazın ve Giriş'a basın. Etiketi çizgi boyunca, çizgiden uzağa ve yeniden üzerine sürükleyin; yuvarlak tutamacıyla döndürün.
  6. İkinci bir etiket ekleyin ve onu × işaretiyle silin.

Eğri ok her iki şekle de kenarlarına dik olarak ulaştığında ve çizgiyi takip eden bir etiket taşıdığında işiniz bitmiştir.

Kendinizi sınayın

  1. Eğri bir çizgideki sarı elmas neyi gösterir?
  2. Ortaya yapışma olmadan tepe noktasını herhangi bir yere nasıl yerleştirirsiniz?
  3. Çizgi hareket ettiğinde bir etiketi çizgisi boyunca dönük tutan nedir?
Yanıtları göster
  1. Eğri bir çizgideki sarı elmas neyi gösterir?

    Tepe noktası: eğrinin, uçları arasındaki düz çizgiye en uzak noktası. Onu çizgi boyunca sürüklemek tepeyi taşır; çizgiden uzağa sürüklemek eğriyi daha çok büker.

  2. Ortaya yapışma olmadan tepe noktasını herhangi bir yere nasıl yerleştirirsiniz?

    Elması sürüklerken Command (Mac) veya Control tuşunu basılı tutun.

  3. Çizgi hareket ettiğinde bir etiketi çizgisi boyunca dönük tutan nedir?

    Çizgi panelinde etiketin satırındaki Çizgiyi takip et.

Daha fazla bilgi

Döküm

Dökümü göster (anlatım ve ekranda görünenler)

Introduction

Chapter two: curves and line labels. A curved line is often the clearest way to show a flow that loops around other shapes, and a label says what the line means.

In this chapter you draw a curved arrow, shape it, and label it.

A curved line

The rider returns the bike at a docking bay. Press the A key, choose Curved in the Line options bar, and drag from the rider to the docking bay.

On screen: A → Curved → drag Rider → Docking Bay.

The new line is selected. The yellow diamond sits on the peak of the curve: the point farthest from a straight line between its ends.

On screen: The curve handle on the peak.

The peak

Drag the diamond along the line toward the docking bay. The peak moves toward that end, and the curve stays one smooth arc.

On screen: Drag the peak toward the docking bay.

Drag it back. Near the middle, it snaps to the center, and a guide shows it. Hold Command, or Control, while you drag to place it anywhere.

On screen: Drag the peak back; it snaps to the middle.

Drag the diamond away from the line to bend the curve more, or toward it to flatten it. With Shift held, only the bend changes.

On screen: Drag the peak outward.

The Line panel shows the same as numbers: Curve for the bend, and Peak position, from five to ninety-five percent along the line. Center puts the peak back in the middle.

On screen: Line panel: Curve, Peak position, Center.

Square ends

Under Ends, tick End in Square to the edge. The curve now meets the docking bay at a right angle to its edge, and eases into its arc. Tick Start too, for the rider.

On screen: Ends → Square to the edge: End, Start.

The setting stays while the shapes move. Drag the rider: both ends stay square.

On screen: Drag Rider.

Line labels

Now a label. Double-click the line, type returns a bike, and press Enter.

On screen: Double-click the curve → returns a bike → Enter.

Click the label to select it. Drag it along the line: it keeps its place along the line when the line moves.

On screen: Drag the label along the line.

Drag it away from the line, and a thin leader line connects it. Bring it back within a few pixels, and it snaps onto the line again.

On screen: Drag the label off the line, then back.

A selected label shows a round knob. Drag it to rotate the label. It snaps to horizontal, to the line's direction and to fifteen-degree steps.

On screen: Drag the rotate knob to the line's direction.

In the Line panel, each label has its position, offsets and rotation, and Follow the line, which keeps it turned along the line wherever the line goes.

On screen: Line panel → Labels.

A line can have several labels. Double-click near the rider for a second one, type paid by app, and press Enter.

On screen: Double-click the line → paid by app.

To delete a label, click its cross, press Delete while it is selected, or right-click it and choose Delete Label. Delete the second one.

On screen: The label's ×.

Recap

To recap: drag the yellow diamond to place the peak, which snaps to the middle; square the ends in the Line panel; and double-click a line to label it, then move, rotate or delete the label.

In the next chapter, you add charts to the board.