Capítulos do curso
Treinamento · Trilha 13. Quadros brancos · Capítulo 13.2 de 4
13.2 Curvas e rótulos de linhas 3:09
Molde uma linha curva pelo seu pico, deixe as pontas perpendiculares às formas e posicione, gire e exclua rótulos.
Mostra o Holarch 2.35.
O que você vai aprender
- Desenhar uma linha curva e posicionar seu pico com o losango amarelo, encaixando-o no meio
- Curvar ou achatar uma curva e definir Curva e Posição do pico no painel Linha
- Deixar as pontas de uma linha perpendiculares às bordas das formas
- Adicionar, mover, girar e excluir rótulos de linha
Molde linhas no quadro de conceito da Bike-Share Dock: desenhe uma seta curva, mova o pico da curva ao longo da linha com o losango amarelo (ele se encaixa no meio), curve-a mais ou menos, defina Curva e Posição do pico no painel Linha, deixe as pontas perpendiculares às bordas que elas encontram para que a curva saia de cada forma em ângulo reto, depois adicione rótulos de linha, mova-os ao longo da linha e para fora dela, gire-os com encaixe, faça-os seguir a linha e exclua-os.
Arquivos de projeto
- Projeto inicial (.holarch.json; Gerenciar projetos → Arquivos de projeto ▾ → Importar projeto (.json)…)
- Projeto concluído (.holarch.json; Gerenciar projetos → Arquivos de projeto ▾ → Importar projeto (.json)…)
O vídeo é reproduzido a partir de holarch.app; veja a Política de Privacidade.
Prática
Faça isto você mesmo no Holarch, na Bike-Share Dock.
- Abra o arquivo inicial do capítulo e o quadro branco Dock Concept.
- Pressione A, escolha Curva na barra de opções de linha e arraste do ciclista até o compartimento de encaixe.
- Arraste o losango amarelo em direção a uma das pontas e depois de volta até ele se encaixar no meio. Arraste-o para longe da linha mantendo Shift pressionado.
- Na seção Linha do inspetor, marque Perpendicular à borda para Início e Fim e depois mova o ciclista.
- Clique duas vezes na linha, digite
returns a bikee pressione Inserir. Arraste o rótulo ao longo da linha, para longe dela e de volta; gire-o com sua alça redonda. - Adicione um segundo rótulo e exclua-o com seu ×.
Você terminou quando a seta curva encontrar as duas formas perpendicular às bordas delas e levar um rótulo que segue a linha.
Teste-se
- O que o losango amarelo em uma linha curva mostra?
- Como posicionar o pico em qualquer lugar sem o encaixe no meio?
- O que mantém um rótulo alinhado à sua linha quando a linha se move?
Mostrar as respostas
O que o losango amarelo em uma linha curva mostra?
O pico: o ponto da curva mais distante da linha reta entre suas pontas. Arrastá-lo ao longo da linha move o pico; arrastá-lo para longe curva mais a linha.
Como posicionar o pico em qualquer lugar sem o encaixe no meio?
Mantenha Command (Mac) ou Control pressionado enquanto arrasta o losango.
O que mantém um rótulo alinhado à sua linha quando a linha se move?
Seguir a linha, na linha do rótulo no painel Linha.
Saiba mais
Transcrição
Mostrar a transcrição (narração e o que aparece na tela)
Introduction
Chapter two: curves and line labels. A curved line is often the clearest way to show a flow that loops around other shapes, and a label says what the line means.
In this chapter you draw a curved arrow, shape it, and label it.
A curved line
The rider returns the bike at a docking bay. Press the A key, choose Curved in the Line options bar, and drag from the rider to the docking bay.
On screen: A → Curved → drag Rider → Docking Bay.
The new line is selected. The yellow diamond sits on the peak of the curve: the point farthest from a straight line between its ends.
On screen: The curve handle on the peak.
The peak
Drag the diamond along the line toward the docking bay. The peak moves toward that end, and the curve stays one smooth arc.
On screen: Drag the peak toward the docking bay.
Drag it back. Near the middle, it snaps to the center, and a guide shows it. Hold Command, or Control, while you drag to place it anywhere.
On screen: Drag the peak back; it snaps to the middle.
Drag the diamond away from the line to bend the curve more, or toward it to flatten it. With Shift held, only the bend changes.
On screen: Drag the peak outward.
The Line panel shows the same as numbers: Curve for the bend, and Peak position, from five to ninety-five percent along the line. Center puts the peak back in the middle.
On screen: Line panel: Curve, Peak position, Center.
Square ends
Under Ends, tick End in Square to the edge. The curve now meets the docking bay at a right angle to its edge, and eases into its arc. Tick Start too, for the rider.
On screen: Ends → Square to the edge: End, Start.
The setting stays while the shapes move. Drag the rider: both ends stay square.
On screen: Drag Rider.
Line labels
Now a label. Double-click the line, type returns a bike, and press Enter.
On screen: Double-click the curve → returns a bike → Enter.
Click the label to select it. Drag it along the line: it keeps its place along the line when the line moves.
On screen: Drag the label along the line.
Drag it away from the line, and a thin leader line connects it. Bring it back within a few pixels, and it snaps onto the line again.
On screen: Drag the label off the line, then back.
A selected label shows a round knob. Drag it to rotate the label. It snaps to horizontal, to the line's direction and to fifteen-degree steps.
On screen: Drag the rotate knob to the line's direction.
In the Line panel, each label has its position, offsets and rotation, and Follow the line, which keeps it turned along the line wherever the line goes.
On screen: Line panel → Labels.
A line can have several labels. Double-click near the rider for a second one, type paid by app, and press Enter.
On screen: Double-click the line → paid by app.
To delete a label, click its cross, press Delete while it is selected, or right-click it and choose Delete Label. Delete the second one.
On screen: The label's ×.
Recap
To recap: drag the yellow diamond to place the peak, which snaps to the middle; square the ends in the Line panel; and double-click a line to label it, then move, rotate or delete the label.
In the next chapter, you add charts to the board.