Holarch
Capítulos del curso

Formación · Curso 13. Pizarras · Capítulo 13.2 de 4

13.2 Curvas y etiquetas de línea 3:09

Dar forma a una línea curva por su pico, hacer sus extremos perpendiculares a las formas, y colocar, girar y eliminar etiquetas.

Muestra Holarch 2.35.

← 13.1 Formas y líneas · Todos los capítulos · 13.3 Gráficos →

Lo que aprenderá

  • Dibujar una línea curva y colocar su pico con el rombo amarillo, ajustándolo al centro
  • Curvar o aplanar una curva, y definir Curva y Posición del pico en el panel Línea
  • Hacer los extremos de una línea perpendiculares a los bordes de sus formas
  • Añadir, mover, girar y eliminar etiquetas de línea

Dé forma a las líneas de la pizarra de concepto del Bike-Share Dock: dibuje una flecha curva, mueva el pico de la curva a lo largo de la línea con el rombo amarillo (se ajusta al centro), cúrvela más o menos, defina Curva y Posición del pico en el panel Línea, haga los extremos perpendiculares a los bordes que tocan para que la curva salga de cada forma en ángulo recto, y después añada etiquetas de línea, muévalas a lo largo de la línea y fuera de ella, gírelas con ajuste, haga que sigan la línea y elimínelas.

Archivos de proyecto

  • Proyecto inicial (.holarch.json; Gestionar proyectos → Archivos de proyecto ▾ → Importar proyecto (.json)…)
  • Proyecto terminado (.holarch.json; Gestionar proyectos → Archivos de proyecto ▾ → Importar proyecto (.json)…)

El vídeo se reproduce desde holarch.app; consulte la Política de privacidad.

Práctica

Hágalo usted mismo en Holarch, en Bike-Share Dock.

  1. Abra el archivo inicial del capítulo y la pizarra Dock Concept.
  2. Pulse A, elija Curva en la barra de opciones de línea y arrastre desde Rider hasta Docking Bay.
  3. Arrastre el rombo amarillo hacia un extremo y de vuelta hasta que se ajuste al centro. Arrástrelo fuera de la línea manteniendo pulsada la tecla Mayús.
  4. En la sección Línea del inspector, marque Perpendicular al borde para Inicio y Fin y mueva después Rider.
  5. Haga doble clic en la línea, escriba returns a bike y pulse Intro. Arrastre la etiqueta a lo largo de la línea, lejos de ella y de nuevo sobre ella; gírela con su control redondo.
  6. Añada una segunda etiqueta y elimínela con su ×.

Habrá terminado cuando la flecha curva llegue a ambas formas perpendicular a sus bordes y lleve una etiqueta que siga la línea.

Compruebe lo aprendido

  1. ¿Qué indica el rombo amarillo de una línea curva?
  2. ¿Cómo se coloca el pico en cualquier punto sin el ajuste al centro?
  3. ¿Qué mantiene una etiqueta girada a lo largo de su línea cuando la línea se mueve?
Mostrar las respuestas
  1. ¿Qué indica el rombo amarillo de una línea curva?

    El pico: el punto de la curva más alejado de la recta entre sus extremos. Al arrastrarlo a lo largo de la línea, el pico se desplaza; al arrastrarlo hacia fuera, la curva se curva más.

  2. ¿Cómo se coloca el pico en cualquier punto sin el ajuste al centro?

    Mantenga pulsada la tecla Comando (Mac) o Control mientras arrastra el rombo.

  3. ¿Qué mantiene una etiqueta girada a lo largo de su línea cuando la línea se mueve?

    Seguir la línea, en la fila de la etiqueta del panel Línea.

Más información

Transcripción

Mostrar la transcripción (narración y lo que aparece en pantalla)

Introduction

Chapter two: curves and line labels. A curved line is often the clearest way to show a flow that loops around other shapes, and a label says what the line means.

In this chapter you draw a curved arrow, shape it, and label it.

A curved line

The rider returns the bike at a docking bay. Press the A key, choose Curved in the Line options bar, and drag from the rider to the docking bay.

On screen: A → Curved → drag Rider → Docking Bay.

The new line is selected. The yellow diamond sits on the peak of the curve: the point farthest from a straight line between its ends.

On screen: The curve handle on the peak.

The peak

Drag the diamond along the line toward the docking bay. The peak moves toward that end, and the curve stays one smooth arc.

On screen: Drag the peak toward the docking bay.

Drag it back. Near the middle, it snaps to the center, and a guide shows it. Hold Command, or Control, while you drag to place it anywhere.

On screen: Drag the peak back; it snaps to the middle.

Drag the diamond away from the line to bend the curve more, or toward it to flatten it. With Shift held, only the bend changes.

On screen: Drag the peak outward.

The Line panel shows the same as numbers: Curve for the bend, and Peak position, from five to ninety-five percent along the line. Center puts the peak back in the middle.

On screen: Line panel: Curve, Peak position, Center.

Square ends

Under Ends, tick End in Square to the edge. The curve now meets the docking bay at a right angle to its edge, and eases into its arc. Tick Start too, for the rider.

On screen: Ends → Square to the edge: End, Start.

The setting stays while the shapes move. Drag the rider: both ends stay square.

On screen: Drag Rider.

Line labels

Now a label. Double-click the line, type returns a bike, and press Enter.

On screen: Double-click the curve → returns a bike → Enter.

Click the label to select it. Drag it along the line: it keeps its place along the line when the line moves.

On screen: Drag the label along the line.

Drag it away from the line, and a thin leader line connects it. Bring it back within a few pixels, and it snaps onto the line again.

On screen: Drag the label off the line, then back.

A selected label shows a round knob. Drag it to rotate the label. It snaps to horizontal, to the line's direction and to fifteen-degree steps.

On screen: Drag the rotate knob to the line's direction.

In the Line panel, each label has its position, offsets and rotation, and Follow the line, which keeps it turned along the line wherever the line goes.

On screen: Line panel → Labels.

A line can have several labels. Double-click near the rider for a second one, type paid by app, and press Enter.

On screen: Double-click the line → paid by app.

To delete a label, click its cross, press Delete while it is selected, or right-click it and choose Delete Label. Delete the second one.

On screen: The label's ×.

Recap

To recap: drag the yellow diamond to place the peak, which snaps to the middle; square the ends in the Line panel; and double-click a line to label it, then move, rotate or delete the label.

In the next chapter, you add charts to the board.